Hi Enzo, well that IS good news!! These computers can seem to have a mind of their own, sometimes but being very logical things I guess that can't be true!! I do hope it continues to behave now for

Nigel, I do not know what to do any more. This evening I switched on the PC and saw that the "T" icon went pink directly without doing anything. Now I want to leave all like it is. I have also set the

Hi to those receiving MSG 3. Don't want to bother ops with getting parallel dissemination if there is no advantage over 1 & 2, if there is no real benefit. Apart from testing one's system, is there an

Well, that's disappointing Enzo! a) I would now try going back to not using the ramdisk - i.e. change the setting in recv.ini [locations] to a tmp folder, in your "receiving" folder, reboot and see

Nigel, I am afraid to say that I have southed hooorray to fast because after have installed the RAMDISK I am again back with the same problem. Actually it is about 1 hour that I have installed the

Hi Enzoy, well that is good news - a pink T indicates that everything is working OK, at least for a short time!! My answers are:- a) I would leave the log level at verbose until you have a stable

Hi to those receiving MSG 3. Don't want to bother ops with getting parallel dissemination if there is no advantage over 1 & 2, if there is no real benefit. Apart from testing one's system, is there an

Hi Nigel, I have set in the ini file the Level to Verbose and made a full reboot as you said. Restarted again the Tellicast program and saw that the “T” icon is still yellow. I’ve let it go

Hi Enzo, This getting a bit convoluted! a) The line I was referring to was the last one of the log that you posted ( MSG:2012-12-19 14:4006.449:tc-recv.exe running [5460] ). I have marked it below

Hi Nigel, hera are the answers at your questions: WHERE TO SEE? CANNOT FIND THAT LINE. I'VE DONE IT AT THE TOP OF THE LOG PAGE OF THE HTML PAGE. DONE ALSO BY THE RECV.INI FILE BUT GAD THE SAME

Hi again Enzo, this is the relevant bit from Eumetsat trouble shooting pages:- http://www.eumetsat.int/Home/Main/DataAccess/EUMETCast/ReceptionStationSet-up/SP_201003171032773?l=en#B1.3 Nigel

Hi Enzo, is there nothing more, after the "tc-recv.exe running" line ?? Also, the line before that says " Log level is "normal"" - how did you make the change to "verbose" ?? It can be done in your

Hi Nigel, thanks for your help. What i have done now is: I have closed the TC-RECV program and deleted the log file. Restarted the TC-RECV program and set the level to VERBOSE how you suggested

Hi Enzo, I am not an expert but if you posted what you are actually seeing in your log files, after setting it to "verbose", someone may be able to come up with a clue. Nigel

Please anybody can help me to get out of this problem? I cannot receive any more. Thanks Enzo

--- In MSG-1@..., Alan Banks wrote: Without more info on your system, that's a difficult question to answer. What Windows are you running PC card or USB Two or one PC system. If two

Without more info on your system, that's a difficult question to answer. What Windows are you running PC card or USB Two or one PC system. If two do you need antivirus. I have been running this PC for

Hello, After another lost battle against my antivirus software I had to reload my PC - guess I will be through it by X-mas. When re-installing Eumetcast-MSG Data Manager I am hit by a neverending wave

Thanks Douglas, in that case I think I will wait. Robert