Hello, I use version 317311 of the MSG animator. -when opening it it shows View 1 West Europe, View 2 North Atlantic IR, View 3 UK HRV, View 4 The alps. All these 4 views work well and carry out

Hello, I use version 317311 of the MSG animator. -when opening it it shows View 1 West Europe, View 2 North Atlantic IR, View 3 UK HRV, View 4 The alps. All these 4 views work well and carry out

Hi Same thing happened to me after the update: Interface number was changed and had to redo the security settings as David pointed out. Its easy finding the new interface number:

Hi Same thing happened to me after the update: Interface number was changed and had to redo the security settings as David pointed out. Its easy finding the new interface number:

So I still have 2004 to come. ????? Regards, John. ================================== Yes, John, it's a much bigger update. You can get it when you want with the Windows Media Creation tool, or

Ian, Just to say that I updated to the latest Windows update yesterday afternoon but before I did since my computer runs 24/7/365 I did a Disk clean-up on both C: and E: drives and then a system

Ian, 'Hold your horses!' My day to day computer warned me this morning when booting that I had security vulnerabilities and to download the latest Windows update. I initiated these and looked at

Ian, Just to say that I updated to the latest Windows update yesterday afternoon but before I did since my computer runs 24/7/365 I did a Disk clean-up on both C: and E: drives and then a system

------------------------------------------------------------------------------ David I appreciate you taking the time to do theses tests. Although the 5927 has the latest hardware (and it does work

Ian, I've done some tests with the TBS5927 on my 32-bit test system and report that it's working, although not quite as expected. Basically, the existing 1.0.0.4 driver is still in use, and both

------------------------------------------------------------------------------------- Thanks to all who have replied. Having at last been able to spend some time looking at this, I have discovered

I have not had the time yet to figure out all the issues, but my TBS 5927 is presently unusable as windows 10 refuses to load the only driver available and BDADataEx and the TBS IPS tool have been

Sorry to hear that Ian. I run an SR-1 and TBS 6903 in dual mode using Crazycat’s drivers and it hasn’t had any impact on reception (the 2004 update). The only issue was a change of interface

The Windows 10 update on my main computer has made a real mess of my Eumetcast hardware and software. This happened about 2 days ago and fortunately my 10 year old backup computer has not had the

====================================================================== I fortunately have not had the update and had read in several of the computer magazines to stay well clear as there was, yet

The Windows 10 update on my main computer has made a real mess of my Eumetcast hardware and software. This happened about 2 days ago and fortunately my 10 year old backup computer has not had the

Just to report success. I reran cfgmaker and discovered the update had changed some interface numbers. Now back and running. Special thanks to David. Cheers James.

With the amount of debris that the retina deposits in my eye, close computer work is a bit headache inducing, and after a lot of effort still no joy. I will take a temporary break and maybe set up a

Glad you have no errors David- though if you had it might have helped me!! I run two MRTG files, one for the SR-1 and one for the TBS. both cmd boxes report initial errors of exactly the same kind.

Glad you have no errors David- though if you had it might have helped me!! I run two MRTG files, one for the SR-1 and one for the TBS. both cmd boxes report initial errors of exactly the same kind.