Ferdinand and All Movies are possible with Metop-A/B/C and GOES-16. Sentinel-3A + Sentinel-3B hand combined will give the highest resolution animations (OLCI has 300m IFV at SSP) but at the downside

Very nice Ernst. I was thinking that maybe the combination of 3A and 3B could give sufficient coverage to make a movie, but I haven’t tried that yet. Cheers, Ferdinand

Hi Ernst Very nice image - any chance you would share your python script :-) Regards Graham

Ferdinand and All After years of using SNAP 4.0 to produce all OLCI EFR images with convert I finally wrote something nice for Pytroll/Satpy and A68. Unfortunately there is still no overlap of

Hello All, After my 1.25m dish was damaged I have replaced it with a 1m dish just a little higher up the scaffold pole. For the last few weeks I have tried and tried to receive a usable signal. I have

Greetings Hugo from the UK and thanks for your response. Yes, I have checked user name and password and still the same. I have been using EUMETCastView on a regular basis for Sentinel 3a imaging for

You could try a technique that has been used since the early days of satellite TV. Put a satellite signal strength meter in the coax feed to the LNB. The LNB being powered

Hi John, It has been a while since I tried to download some Sentinel images via Scihub/CODA in EUMETCastView. You can always use the interactive website of Scihub to download the files and than point

Hello, Er, yes, basically That is the only way you are going to know if an LNB is working or not. Provided there is not a cable and/or receiver issue. Regards, John. ++++++++++++++++++++

Hello All, I am assuming, because of the lack of replies, that the only way to check a LNB is to install it on a dish and check for a signal or not. This seems quite odd to me in this technological

Thank you to all who replied to my request. Peter

For some time I have been enjoying displaying Sentinel 3A imaging using the EUMETCastViewer programme with the data obtained from the coda.eumetsat.int site. These past few days I have not been able

i have the diamond for sale pmed

Hi On the ATP Facebook group there’s someone that builds and sells QFH antennas John Queen is hi name Jan Sent from Mail for Windows 10

Hi Peter From time to time an amateur builds and sells them here but currently there is none for sale. I hope this helps. Good luck. Regards, Frank Virus-free. www.avg.com diogenes1 via

Hello, Try this

Hello again, Does anyone know of a U.K. commercial source for this antenna. I know that there are a number of web sites out there with instructions on how to make this antenna but for a number of

As both EUMETSAT and ESA are regular posters on Twitter I recommend you join. You can simply "follow" those you wish to. More info:

Latest add-on: both South Georgia and A68 in a single image (Sentinel 3A today). Separated by only 1,5x the width of the island.

Ernst, Looking again more attentively I think you are right, as also the coloration (blueish vs. white) neatly follows the contour of the cloud. Well spotted! Cheers, Ferdinand