Hi Ian, Thats the driver i originally installed and it didnt seem to work, Thorsten , whos very helpful, said taht i would need the driver 10.1.3.2130. I cant seem to get that to work either. Are you

==================================================================================== Philip the driver I am using from Silicon Labs is 6.7.0.0 dated 19/3/2014. If you follow the Eumetsat PDF

Evening Thorsten, I have done exactly as you say and i have in Device Manager Silicon Labs CP210xUSB to UART Bridge (COM4) with yellow exclamation mark Driver is shown as 10.1.3.2130 dated

David, Error 404 is displayed when using 188.64.184.197 Cheers, Thorsten

============================================================== I am using EUMETCastView at the moment and that works differently as you know. Since 07.00 this morning I am seeing 5 incomplete scans

Please use 188.64.184.197 instead of SatSignal to access my Web site. This is a temporary measure as a consequence of changes forced by brexit. Back to normal with a day or two, I hope!

David, there are incomplete and missing images in the Himawari data stream in a varying manner. Cheers, Thorsten

Meantime Eumetsat informed that the Himawari issue is caused in the data transfer from JMA to Eumetsat, resulting in intermittent and delayed data. There is thus far no solution or a resolution time

Meantime Eumetsat informed that the Himawari issue is caused in the data transfer from JMA to Eumetsat, resulting in intermittent and delayed data. There is thus far no solution or a resolution time

Hi all, in the meantime I have written a Windows script to address this issue. The script delays the files and sort it by slots. So most of the data is processed by MSG Data Manager. Instead of

Thanks Ferdinand, for the news from Eumetsat. I hope in a resolution of the problem Greetings Mina Stefano Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di Ferdinand Valk Inviato: lunedì 29

I was in contact with Eumetsat about this and received a rather unsatisfactory reply (see below). This was almost a week ago and no further information was supplied, nor was there an indication of a

Good morning . Other users have reception problem Himawari file does Eumetcast? MDm log describes Skipped continuously from is older than current data, and does not store images. Operational service

Philip, once again: 1. Remove the USB UART Bridge from USB. 2. Follow this instructions to fully remove the driver: How to remove drivers 3. Install the driver v10.1.3 4. Plug in the USB UART

PS Just in case needed, i have windows 10 version 1803 OS build 17134.376 dated 25/06/2018 Philip

Hi, I have just had a quick go to update the driver and my dialog box reports Update Drivers-Silicon Labs CP210xUSB to UART Bridge (Com3) The best drivers for your device is already installed yet in

and to further add mine is a 64bit system. thanks Philip

Just to add the only installation package i used was the Windows 10 Universal version(v10.1.3) but maybe i opened the wrong application from within that. I installed CP210xVCPInstaller_x64 and

Hi Thosten, I thought on this new pc i had never installed the Windows XP/Server 2003/Vista/7/8/8.1 (v6.7) and only Windows10 Universal version (v10.1.3) but obviously i have . Just so as i know that

Hi Philip, Driver Version 6.7.0.0 on your computer. From the Silicon Labs download page: Download for Windows XP/Server 2003/Vista/7/8/8.1 (v6.7) You have already installed the wrong driver version