My computer is now back after being at a computer repair shop who specialize in most aspect of IT troubles, and they could not install succesfully the Silicon Labs CP210xUSB to UART Bridge driver and

OK David, I created an MsgAnimbtor which indeed runs nicely parallel to MsgAnimator without further ado. I have seen that at times there are delays due to the HD showing at 100% Active Time. Having

David, In order to spread disk activity Himawari and Goes-16 images are ending up not in the standard MSG/Images/FSD tree but elsewhere. Animator has only one general <image data path> for all

Very nice, it works! Thank you Maurizio

David, In order to spread disk activity Himawari and Goes-16 images are ending up not in the standard MSG/Images/FSD tree but elsewhere. Animator has only one general <image data path> for all

Ooops - sorry about that - pressed the wrong button. Thanks for doing the highlighting, David. Hopefully it will help someone to stop tearing their hair out! Regards Nigel Sent with AquaMail for

Sent with AquaMail for Android http://www.aqua-mail.com

Many thanks, Ernst, for thatexplanation. Very interesting - it's great to know why something doesn't work! One day soon I must experiment with using the TBS-6903 to receive Basic +HVS-1 +HVS-2

An example can be found here : https://www.flickr.com/photos/137270544@N02/38824594005/in/datetaken-public/ Hugo

Hi Maurizio, When using the pseudo True Color option you should set 'Red' to channel C02, 'Bleu' to C01 and 'Green' to C03. The C03 is the so called 'Veggie' channel. Kind regards, Hugo

Dear Hugo, pseudo True Color Imaes for GOES 16, should show "pseudo green areas". Actually, when I use the option "calculate pseudo…" the output image reproduces a "scale brown land" also for

David, Try as I might I can't get the proper remap out of MapToGeo for Goes-15. The generated background-msg1-goes_w.bmp is totally off. Just to make sure: - using v2.0.5.54, registered version -

Apologies for jumping into this thread but I want to second Francis's comment - you surely are a star David! The link on your web site, you gave above, had the solution to my problem - particularly

Nigel, The SR1 is based on the STV0900AAC chip which is a dual channel demodulator. That's why you have 2 LNB sockets and 2 tuners for reception of 2 satellites when the demodulatot is set to dual

Hugo, I only used an SR1 in the transition phase DVB-S -> DVB-S2 as a pilot user for EUMETSAT. Your HDD performance seems rather moderate but you have a good point saying that the GNU/Linux DVB

Apologies for jumping into this thread but I want to second Francis's comment - you surely are a star David! The link on your web site, you gave above, had the solution to my problem - particularly

Hi Ernst, Sorry for the late reply but I wasn't at home yesterday afternoon. I included the specs from my hard disk. I never used a RAM drive for receiving tellicast files except in the beginning when

David you are a star! MODCOD was enabled as both, so I hope that will help. I have sent a message to Ops as well. Regards Francis =========================== I try to shine