Hi The TFTP thing made no difference so id better untick it again ( dont want to bugger things up more). And James after fail i closed and immediatelty started again Philip

it did searching for required files and now its applying changes ( taking ages). I hope i can undo this if it doesnt work Philip

Just one thing to point out Philip, when you click on Einstein once and it fails close and immediately try again. Also once one device has taken over the port then others can’t access it.

interesting TFTP client is not ticked but then if this solves it windows has done it on its own lets try...will report Philip

Just a thought does telnet use port23 and if so how do i find out if its there and allowing access. i cant even find port23 in comodo firewall settings . I may be getting out of my knowledge depth

Hi Philip I assume you have TFTP installed Regards Graham

by the way i have tried it with comodo firewall and windows defender both disabled thanks philip

Hi Douglas Ok i will do it from the console When i click on the console i can see all 3 dials showing data incoming and in to my software . I click on einstein and see my device ip address which is

============================================================================= Philip I do not have Telnet selected in the windows features options in 'Programs and Features' in Control Panel. However

Douglas, Here as requested are all the ip addresses on the windows8.1 computer and the SR1 ip address is 192.168.10.99. To me they are on the same network thanks Philip

Hi Douglas, Are you around to help. My heads getting so confused now i need a step by step guide to see whats happening Can we start off with sorting the telnet out on my windows8.1 computer which has

Hi Patrick, really strange. I am courious what the cause will be. Cheers, Thorsten

Hi Thorsten, Justtso let you know that I have installed the previous version of the Tellicast software (2.4) and all is now up and running...no problems with reception. Strange,... Anyway I have taken

Hi Douglas Will you be on later in the day, have to go out to this dinner shortly. May be we can go through one step at a time. Ethernet cable connected from my computer to the TRAFFIC port of the

I don't know whether I have got this right, but according to your ipconfig, your USB/UART address is 192.168.10.150 and as I understand it. Your SR1 is set to 192.168.10.99. If that is the case then

I don't know whether I have got this right, but according to your ipconfig, your USB/UART address is 192.168.10.150 and as I understand it. Your SR1 is set to 192.168.10.99. If that is the case then

Hi Douglas, Be about 6ish uk time Good man many thanks Philip

======================================================================== No problems Philip. Specifically connected to what in your computer and what is its address. Regards, Douglas.

Hi David last type then must go i can PING the SR1 from my windows8.1computer but only when i have the USB to serial adapter attached. It does not PING using ethernet to ethernet thanks Philip

Hi Douglas Will you be on later in the day, have to go out to this dinner shortly. May be we can go through one step at a time. Ethernet cable connected from my computer to the TRAFFIC port of the