Ernst, As promised the log summary of BAS, HVS-1 and HVS-2 for date 2018-11-10 ( from 8:00 to 24:00 UTC). I do have a missed file for hvs-2 but I do not know if this was weather related or not. The

Morning all I was reading in one of the setting up ayecka guides the SR1 has multiple addresses internally EUMETCast data flow 192.168.10.102 Management control 192.168.10.99 My SR1 the only ip i can

Hi Graham I tried that cmd but the info doesnt stop on the screen more than a fraction of a second. Is there a command to keep it on screen so i can view the details, which could be very very

Hi Philip You could try this How do I see what ports are in use? How to check which application is using which port Open the command prompt - start » run » cmd or start » All Programs »

Hi Graham All 3 dials are working as they should be. I think after all ive been through this evening that the problem is that telnet is trying to use a port that is being used already by another

Hi Philip It may be but does the SR1 console show that - if it is showing Not Locked then the ip address is wrong What does it show Regards Graham

Hi Graham, The data is definitely flowing in (filling up my drive too quickly sometimes). I can ping my SR1. I just cant communicate with telnet whcih after working faultlessly for a long time, i

Hi Robert Yes I did Using 192.168.10.99 does the SR1 console show data flowing Regards Graham

Hi Graham I am starting to get really lost again My SR1 is on 192.168.10.99 my network adapter is 192 168.10.150 i do not have castclient.ini i

Hi Philip The ip address you see in the SR1 console is not the same as the one in the network adapter that your data is coming over So in my castclient.ini the interface address is set at 192

Returning to my theory about port 23 and telnet can my ISP block that port Philip

Hi The TFTP thing made no difference so id better untick it again ( dont want to bugger things up more). And James after fail i closed and immediatelty started again Philip

it did searching for required files and now its applying changes ( taking ages). I hope i can undo this if it doesnt work Philip

Just one thing to point out Philip, when you click on Einstein once and it fails close and immediately try again. Also once one device has taken over the port then others can’t access it.

interesting TFTP client is not ticked but then if this solves it windows has done it on its own lets try...will report Philip

Just a thought does telnet use port23 and if so how do i find out if its there and allowing access. i cant even find port23 in comodo firewall settings . I may be getting out of my knowledge depth

Hi Philip I assume you have TFTP installed Regards Graham

by the way i have tried it with comodo firewall and windows defender both disabled thanks philip

Hi Douglas Ok i will do it from the console When i click on the console i can see all 3 dials showing data incoming and in to my software . I click on einstein and see my device ip address which is

============================================================================= Philip I do not have Telnet selected in the windows features options in 'Programs and Features' in Control Panel. However