Further to the reported signal drop on 7/11/2018, I am now seeing a further small drop today in clear conditions. Fortunately unlike some my signal drop on 7/11/2018 was small and this further drop

I haven't really been following this thread, but I understand that Philip is having trouble communicating with the SR1 management port. If I am wrong please ignore this. When the SR1 first came out, I

Ernst (& anyone else for that matter), OK looks like I am confused (common occurrence these days ...) I do have a dvb1_0 - which I thought was hvs-1 (& dvb1_1 was hvs-2) I do have traffic on dvb1_0

Tim, You probably have a [channel] name=* target_directory=data/eumetcast/bas/default tmp_directory=data/tmp/bas at the end of your ini file. This puts everything not distributed yet into directory

I believed that when putting the # sign before a group in this file, then that data would be ignored. But on my system all unwanted files are being dumped in "default". For example, sometimes I do not

Nick, You should see HVS-2 traffic with: # dvbtraffic -a1 or # ifconfig dvb1_0 Are all 3 instances of the TC client running? In /etc/tellicast-client.cfg you must

Yes, but as far as I can tell only bas & hvs-1, which data is on hvs-2? Sorry that last is likely a dumb question that I ought to google - blame it in the dregs of a cold. Yes there is a

Hi Nigel and David, Many thanks for that info. I will delve in to it further tomorrow, unfortunately have to go out this evening. But some interesting network stuff there which i will have to digest,

Nick, If I get that right you have set "options stv6120 rfsource=1" in the stv6120.conf file and now receive Basic + HVS-1 + HVS-2? You should have a dvb1_0 which corresponds to HVS-2 PID

Just a report back to say " all is working as intended" except I've no dvb1_1 I have set rfsource=1 in the stv6120.conf file but ... stv6120 is loaded as is stv9010, however in /var/log/messages it

Hi Philip & Graham, I hesitate to jump in on this thread, as I'm not a network expert, by any means, but I do remember when setting up my SR1, that David advised that the SR1 management should be on

Hi Philip & Graham, I hesitate to jump in on this thread, as I'm not a network expert, by anymeans, but I do remember when setting up my SR1, that David advised thatthe SR1 management should be on the

Ernst, As promised the log summary of BAS, HVS-1 and HVS-2 for date 2018-11-10 ( from 8:00 to 24:00 UTC). I do have a missed file for hvs-2 but I do not know if this was weather related or not. The

Morning all I was reading in one of the setting up ayecka guides the SR1 has multiple addresses internally EUMETCast data flow 192.168.10.102 Management control 192.168.10.99 My SR1 the only ip i can

Hi Graham I tried that cmd but the info doesnt stop on the screen more than a fraction of a second. Is there a command to keep it on screen so i can view the details, which could be very very

Hi Philip You could try this How do I see what ports are in use? How to check which application is using which port Open the command prompt - start » run » cmd or start » All Programs »

Hi Graham All 3 dials are working as they should be. I think after all ive been through this evening that the problem is that telnet is trying to use a port that is being used already by another

Hi Philip It may be but does the SR1 console show that - if it is showing Not Locked then the ip address is wrong What does it show Regards Graham

Hi Graham, The data is definitely flowing in (filling up my drive too quickly sometimes). I can ping my SR1. I just cant communicate with telnet whcih after working faultlessly for a long time, i

Hi Robert Yes I did Using 192.168.10.99 does the SR1 console show data flowing Regards Graham