Op 18-11-2018 om 0:51 schreef Philip Robinson: Philip, Here are mij settings in MDM 3.1.11.1280. Use the latest Beta of MDM to handle the data. Hope this helps

Hello! I had a similar problem yesterday. The solution was an upgrade to the latest MDM beta. Regards Hartmut -----Ursprüngliche Nachricht----- Von: MSG-1@groups.io [mailto:MSG-1@groups.io] Im

Hi David Thankyou, I now have images in GOES-E in GoesABI Manager. But i am still having problems receiving GOES-W images in MDM. As far as i can see all my settings are correct. See attached desktop

Hi David! I’m working with ABI Manager (GOES16) with success. Could it possible to add some parameters for automated start e.g. –START

Hi David! I’m working with ABI Manager (GOES16) with success. Could it possible to add some parameters for automated start e.g. –START –MIN Regards Hartmut

David, Thanks. >I would leave them as it may be helpful if/when you change things in >the future. I think I'm getting a bit too old to 'keep up with the future!' Regards, John. +++++++++++++++++++++

All, EUMETSAT have said that the reduction in SNR (some) many of us saw earlier, a few weeks ago, was due to interference from Hotbird at 13 degrees E. Same situation now? I've just checked Lyngsat

All, Just to say that I tried EUMETSAT's suggestion to slightly tweak my dish to the west yesterday afternoon to lesson the probable(?) reception of Hotbirds vertical channel on the same frequency

Hi David, I still cant seem to get any GOES-W and GOES-E images When i added that entry in hvs-1.ini, I am still not getting images in MDM although i am getting data in the

David, Thanks for the information - interesting. So, (when I do transfer to TC V2.14.4 - which is already installed) should I/do I need to, also have/require the tmp routing active also? That is as

David, Thanks for the information - interesting. So, (when I do transfer to TC V2.14.4 - which is already installed) should I/do I need to, also have/require the tmp routing active also? That is as

Sorry fort he last post! My fault. I upgraded to the latest beta of MDM and everything is fine for GOESW. Regards Hartmut

Hi David! I have a similar problem. Since some times (I don't know the exact date) GOESW will not be processed by MSG4 instance of MDM. Some times ago GOESW channels (America north and south) were

Hi David, I still cant seem to get any GOES-W and GOES-E images When i added that entry in hvs-1.ini, I am still not getting images in MDM although i am getting data in the

Hi David, I still cant seem to get any GOES-W and GOES-E images When i added that entry in hvs-1.ini, I am still not getting images in MDM although i am getting data in the

David, I hope that you meant to say: GOES-E (now) and GOES-W (next year) will be removed from the MSG Data Manager Ferdinand ============================== Yes, of course! Actually, no code has

Hi Almost there with my transfer of all Davids software from my windows 8 to windows10computer. i have most channels and images working again now apart from GOES-E(GOES-16) and GOES-W. Questions 1.

Thanks David, I've never actually signed up for Twitter. I'll have a look. Robert =============================== You'll find Twitter apps for your phone, tablet or desktop. It tends to be used by

Thanks David, I've never actually signed up for Twitter. I'll have a look. Robert