FSD data Look more carefully, and you will see that the data from the satellite is missing, the actual segment is there. Sorry to be pedantic, but it's important to distinguish where the problem

HRIT data has stopped mid-way through 15.30 UTC cycle although FSD data appears ok. Not presently taking LRIT so cannot comment. Ian

Hi folks, I followed the route described below by Paul, except that I got my tellique CDROM direct from T-Systems. However, I was never able to get the TV4PC to work - in the end I followed advice

Hi Arne, Do I understand this correctly? You seem to be saying that there is more than one way to use the installation CDs to get MSG reception working. Also, the Eumetsat supplied CD IS the Tellique

Paul, I made lenghty trials in the past to have Tellique software successful running with WinMe. The missing segments problem you exeperienced -- as I did too - could never be solved in my system.

0245z-0915z. Peter, Same here - I don't thin that the segments were transmitted. May be the eclipse period is starting to affect things somehow, although it is past the maximum for MSG-1? I am

Ian wrote: .... However there are people who are using the original Tellique software that don't have the TV problem which does suggest that OS or set-up may play a part. ..... You're right Ian,

From: Dave Cawley Timestep Dartmouth England e-mail Information@... Web site http://www.Time-step.com Tel. +44 (0)1803 833366 Fax. +44 (0)1803 839498 I have lost the plot here, but if you

02/10/03 Missing data between 0015z-0230z. No segment loss during period 0245z-0915z. Using a Sky Minidish no loss of signal in moderate to heavy rain (4.7mm/hr) but a reduction in signal quality

David, Yes I did, using ipconfig from a dos window. Ipconfig returned three sets of addresses, the DVB card with correct ip address, my network card with correct address, and another one with all

Dave, Thanks for the reply. I do think though that the issue about TV ceasing after the installation of the Tellique software is an interesting one. If as you say the early Tellique software

Well, it _is_ an MSG-1 thread as far as I can tell. Here's why! Eumetsat has projects (e.g. for Africa) where end-users will not have the support of large suppliers, and may have to do the

Add/Remove programs often leaves references to hardware/software in the registry. The sure way is to use Regedit to search and remove any references ( some won't be removable but don't matter) to the

Hello Ian and Group, I started of with the DVB card in my office PC running XP. That was where I found that the Tellique software prevents TV reception. Hence my interest in your ability to receive

Ian, just for info (and hopefully not to prolong the non-MSG thread!) - the issues a number of early adopters saw re (lack of) TV viewing weren't OS related. On a PC which had the Technisat DVB

Outlook 2003? - Not that I can find. But then it's a beta version. Roger |

..from1.4m to 3.8m. Not surplus, or cheap. http://www.satalogue.com/section4/index.htm (no connection with this firm, just passing on the info) David

Hi Paul, I am using the new DVB card and the software is 4.2.2b The Tellique software number is the same as you have but it clearly has changes as mentioned in my mail to Roger and Dave. I know that