Hello Roger ! Yes, I double-checked that, everything is OK. Cheers. Fabrice. Services - PID

All, I had a chat with EUMETSAT during the week and the situation regarding encryption now appears to be more definite. Current plan is that December 2nd will be encryption test day and there will

Fabrice, I had a similar (but not identical) problem when installing Tellique under Win98. It sound's like the advice from Luca about changing user_key_crypt to user_key and entering the unencoded

Thanks all for sharing your experiences on the use of personal firewalls with Tellique and the DVB cards. Does anyone have any specific experience with the Windows XP embedded personal

and Tellique to I have Zone Alarm V2.6.362 on my Receiver PC, configured to allow: Server4PC.exe, local and Internet access, allow server tqrecv.exe, local and Internet access, allow server Seems

Hi, Tellique and MsgDataManager working concurrently and without any problems,Norton Personal Firewal is enabled. 73 de Trevor G0JIX All mail scanned with Norton.

Can't specifically say with McAffe, but you need to allow the DVB card IP address to pass. On some firewalls you will have to allow setup4pc, tqrecv & MSG manager too. -- Steve Blackmore

Ferdinand and Luca Use Zone Alarm - you can easily configure it to allow the Tellique data to pass. Good luck! - Alan

I had the same conclusion several months ago with McAfee firewall on my network. None of the program's authorization or other settings could help. Only "Stop Firewall" gave freedom to the IP traffic

Just received news of a successful install of Tellique 2.3.1 which was stuck for no apparent reason. Turns out the personal firewall software was getting in the way, and was stopping the IP packet

Bonsoir Fabrice, the user password can be listed in the recv.ini either in the clear or in encrypted form. So, in recv.ini either

Fabice, Have you checked that the Technisat Setup4PC - Data Services - PID List contains the PIDs (decimal) 100,300,301,500 for the 11096 MHz transponder? Roger |

Fabrice, you could check: http://www.david-taylor.myby.co.uk/wxsat/atovs/index.html http://www.david-taylor.myby.co.uk/wxsat/atovs/msg1-settings.htm particularly the parts about PIDs and

Hello, First, I thank you for reading this message. I have problems to receive properly MSG1 data stream. I'm using a TECHNISAT card on a Pentium III 1GHz PC running under Windows XP Pro SP1. I

Folks - on a slightly different topic from normal: are we yet able fully to exploit the advantages of MSG-1 over its predecessors? For example, today's HRV animation shows fascinating cloud movements

Hi, Just a couple of little oddities to ponder. 1. Sometimes when I start Animator and select update it updates all 5 of the animations at the same time. At other times it allows me to do them one

David, I couldn't agree more with you. I have found that loading anything that requires the computer to restart ( MS updates new program etc. ) leaves me with problems with the card and Tellique,

Yes, I did. The only way I found to resolve this is a switch ON/OFF, restart has no effect and of course no hot swopping. There is something in the hardware or the two pieces of software

David, Did you also get a missing 0845 cycle yesterday. My log shows last file received for 0830 cycle was at 08:47:38 HRV segment 24. thence.. 08:48:21 Key 65477 expired 08:48.42 Key 65481

has a lot of ended/interrupted after file transmission reports with ..files missing/incomplete. So it certainly was being picked up. The DVB system appeared to be working perfectly, so it does