I just wait a few minutes until the images from the previous run have been processed and saved and the progress indicator on the left shows that a new cycle has started, then I stop. When I restart, I

Guy, the clearance has been fine all through the summer with the trees in full leaf. Having just stood and watched the dish for a while I think it must be the wind-shake. This is creating a movement

And start at the beginning of a picture, tick box en/disabled of course. Guy

It would be interesting to repeat this when the leaves have fallen, 2 deg clearance isn't much. Guy

wrote: David, I have "Persistant images" checked and it does prevent loss of images. What I was thinking was that if one could set a UTC time and date up to which one would process and ignore

Robert, I also had similar symptons caused by trees. Prior to the trees coming into leaf I had no problems and a rock steady signal from an 88cm patio mounted dish. I then noted variations in signal

wrote: stop processing at completion of the next full set of images...... David, As I have explained before, the way the images are currently transmitted, one set of images may start before the

Hi Robert, I have seen TV dishes around here flexing so much in the wind that the opposite sides come within a few inches of each other! This is during the strong gusts of the mistral (which

I agree with You David.. It would be really nice..i'm in the same conditions... Reagrds Corrado

David, It would be nice to have MSG with an option so that you can stop processing at completion of the next full set of images. Reason is that using a dual processing system I leave the

Sorry to say Robert the answer is no. Signal strength here is varying as it has always done between 70% and 79%. This has been one of the best days for missing segments. Lots of ch 12 late segments. I

Serious loss of signal - 7 october 2003 *************************************** List members may have seen earlier exchanges on this topic on the SatSignal list. Today I have experienced a very

wrote: very good point David. Next step is to plug in the SkyStar2 PCI card I have to check if there is any major difference. I have both a 2.3 and a 2.6 version, so I can also see if there is any

luca-dish.jpg in http://groups.yahoo.com/group/SatSignal/files/ ) and the USB version of the SkyStar2 adapter my signal strength is anywhere from 8% (deep red) to 22-23% (barely yellow), and yet I

Folks, been reading the nice posting on the other list, and I'd like to add my 2 europennies to the discussion. With my extra-small dish setup (40cm in a plastic bucket, look for luca-dish.jpg in

True! I'll start to look around for some kind person, and if I can find him/her, I promise you'll be the first ones to know! :-) Ciao, Luca wrote:

I was hoping some kind person would translate it - it isn't too long! Or even suggest what might need to be added to the existing setup information to make it cover the same

wrote: If you can read Italian ! Nice to know there are more initiatives on MSG-1. Greetings, Arne van Belle

douglas@... writes: Douglas, Indeed. Who would have thought 18 months ago events would have turned out, from a cost, logistics and 'technical' sense, from the sublime to the

The folks over on the Italian MSG-1 list have compiled a guide to getting the system running. I don't know how much it duplicates what is on the various Web sites, but it might be a starting point