Philip, "I put all the software on the internal SSD hard disc and ran it all night with no problems." Your software should always be on the SSD. Your external USB drive D:\ is only data. "I am now

Hi Alan, I am not sure i have connections free for an internal drive, will have a look later. Its not a large desktop PC.Acer ASpire xc-780 https://www.acer.com/ac/en/GB/content/model/DT.B5EEK.003

HI David! Thanks! Now it works as designed! Regards Hartmut -----Ursprüngliche Nachricht----- Von: MSG-1@groups.io [mailto:MSG-1@groups.io] Im Auftrag von David J Taylor via Groups.Io Gesendet:

Can't you get a sata connected drive internally mounted in the PC? It is very easy. Alan

Good morning I put all the software on the internal SSD hard disc and ran it all night with no problems. Therefore this must be something to do with the external 5tb seagate hard disc connected to the

Philip, The program and temp directory plus part of the destination (Bas) is on the e-sata whereas the HVS moves to a different HD (internal). Never encountered problems with that configuration. But

Philip, You bought a 5 TB BACKUP drive that is said to be slow with small files and folders. See

Ferdinand Was your EUMETCast data and temp directed to the external hard drive and the programs etc on the internal drive. Did you have any problems that you had to rectify ( eg permissions etc)

Not really the same, but I use an external HGST hard disk for one PC via the e-sata interface. Ferdinand

Hi all Does anyone use external drives to receive EUMETCast data, especially Seagates drives. I would be interested to see if anyone had this problem. Ernst Thanks for the info. I am not absolutely

Hi David! I found some strange dependencies between overlays in MSG4 and GOES: In Version 1280 of MDM: Outlines for GOES15 are correct when MSG4 outlines are ticked. MSG4 Overlays are shifted to

Philip, Your TC logfiles and Windows messages as well as one of your posts also hint that the TC client cannot physically write to the external drive. If so this *might* fill up all your 20GB memory

Hi David! I found some strange dependencies between overlays in MSG4 and GOES: In Version 1280 of MDM: Outlines for GOES15 are correct when MSG4 outlines are ticked. MSG4 Overlays are shifted to

Ernst, David has been very helpful as usual and i followed his advice creating a directory on my external drive and set security on the directory to All users , Full control. As i say everything runs

Hi David, I will try not using the external drive and use only my internal SSD for the EUMETSat data . I have checked all the USB settings i think, but it does look as thought the external drive

Ian, We've now got clear skies down here and SNR is still down 0.4-5 dB at this latest 'drop level.' >Fortunately my drop appears to be less than >most at about 0.2/0.3 SNR but up here in Scotland we

Now i'm back to MDM 1280 and Meteosat11 (MSG4) outlines are OK and those of GOES15 are wrong. Really mysterious. Regards Hartmut ============================ Hartmut, I tested .1282 on the 1845 from

Now i'm back to MDM 1280 and Meteosat11 (MSG4) outlines are OK and those of GOES15 are wrong. Really mysterious. Regards Hartmut -----Ursprüngliche Nachricht----- Von: MSG-1@groups.io

Hi, Was just about go to bed when i noticed one bit missing in the renamed cast-client-channels-bas In the [channel] name=Info-channel-2 in the tmp_directory i hadnt added the D:\ As you can see

Hi David! Below my settings for Meteosat 0°: It takes no matter if „HRV-Fenster zentrieren“ ist ticked or not. In the „detail windows“ outlines and borders are