Here is an image from today using Meteosat-8's High-Resolution Visible channel and 10.8um thermal channel: http://www.david-taylor.myby.co.uk/software/msg_dm.htm#sample It was processed by

One of the hazards of living in the Highlands, or Mars as Dabs like to think of it ;-) usually about

Just to confirm what Ian has already mentioned in the SatSignal group. I have been using an 80cms mesh dish for MSG (and previously ATOVS) without any problems. It is an ex-SKY analogue dish (Scotland

Most we got charged was �8 and that included an atx midi case, usually about �5 Guy

Also recommend Ebuyer, prices are good, delivery is swift and cheap, Dabs are good also but the gits want �25 to deliver anything to me. *********** REPLY SEPARATOR ***********

Hi David No problems with Meteosat 7 channels 1&2 Timestep System with 90cm dish. Cheers Lawrence Brown lawrie@...

Assuming Met 8 and Met 7 operate on the same raw data downlink frequ, Eumetsat's dishes are obviously large enough to have a beamwidth of less than 3.4deg. The raw data downlink for Met 7 is I believe

D avid, I am receiving Met 7 Wefax using a RIG yagi with no interference. http://www.polarorbiter.co.uk/D2.htm Missed the following 28/1/04 1930 Ch 8 Seg 5 1945 Ch 4 Seg 3 lrit Ch 9 Seg 3

So with Meteosat-8 at its operational 3.4W position (according to very recent Kepler data), is anyone seeing co-channel interference between the two satellites, or does that possibility no longer

Has someone had any experience yet in obtaining the license from the belgium met office ? Who/where to send the request. Tnx Pat, on4aao

www.dabs.com are good Guy

My MSG-1 rx computer has failed with a suspect motherboard problem. Can someone remind me of a source for components for base and m/b? Thanks Lawrence Harris

Thanks David, the offset is not huge, hopefully things will settle down once the satellite has been shunted. I curently only take the hrv and fsd data so noticed the difference. wrote:

Hi Lawrence, www.ebuyer.com are competitive. I have dealt with them in the past for Mobo and CPU's. Regards, Basil Haigh Pritchard

Hi All I don't know if anyone else has received this but I got this e-mail from Pamel yesterday. Dear David, Thank you for your mail. I am so pleased to inform you that we have just

all, Just a quickie - in case you missed it - as I did. I have been informed by EUMETSAT that they have been upgrading their control room which has led to some problems with Met-5

Hi I have set my SkyStar DVB USB RX using Skystar V 4.28. I am receiving Hotbird ( in the Green ) but get a 90010115 eror and no TV pictures. Any help please PS I am waiting my Technisat

On the detailed image I am still seeing outlines becoming invisible when crossing cloud that is about 70% white, ie the outlines are grey, not black or white. They become normal if you untick

line? > Hugh, Right now the overlays for channels 1..11 seem to match very well. Channel 12 is a few pixels off, but this is likely due to the orbital respositioning being carried out at the

Using MDM and WXSat I'm able to show the country borders on the detailed image, however they are often noticeably offset and I wondered if there is something I can do to bring them back into