Dear All As you are aware EUMETSAT can now accept payment by credit card for the EUMETCast Client Software and EUMETCast Key Unit. Contrary to John Tellick's earlier email, we would prefer you not

On the DVB icon receiver (right click), try to choose Eumetsat::Hotbird 13E instead of T-System::Hotbird 13E cheers Gérard F6BEK

Here's a list for Hotbird 6 updated a couple of days ago: http://www.lyngsat.com/hb6.shtml And from the home page http://www.lyngsat.com/index.html you can navigate to info. on pretty much

All, Regarding my earlier e-mail on 'ways to pay' I have just had a chat with EUMETSAT who say that they do not have a dedicated FAX line for credit card payments - the FAX numbers I gave are for

David I've had my eToken a week now with the new tq software 2.3.1, just one snag at the moment, I'm receiving LRIT on channel 3 but NO FSD images. I've reported this to Eumetsat, Anybody else found

Ton, You actually remind me.... It will be helpful for those who get new eTokens to report any problems they get - you'll have to get the new user name and password right to start with, and I found

Ian You are right, I looked if I had an image from 20.00 and if I had an image from 18.15 and that was positive. When I look in the list from HRIT I see 18.30 a little piece (bottom) and an empty

Hi Ton, Not quite sure what you mean, but are you saying that you had no break in transmission between 18.30 and 20.00 on HRIT ? Ian.

Hi everyone I have no Token yet and the reception is complete. Cheers, Ton

Alan, It would appear that the 18.30 cycle started, was stopped and a new cycle showing 18.33 was then started. All the segments came in for the 18.33 cycle ( in about 6 minutes ) and saved but they

wrote: the 1830 cycle, right file names etc, but from 1846-1859, 1901-1914, 1916-1929, 1931-1944 and 1946-1959 no data was logged. That explains some of it, but why was the data apparently being

David, On examin ing the tellique log more closely, it seems OK for the 1830 cycle, right file names etc, but from 1846-1859, 1901-1914, 1916-1929, 1931-1944 and 1946-1959 no data was logged. That

wrote: 1815 and 2000 today. Its odd, because the tellique log indicates that files were being received and stored away, but the MDM log shows nothing much happening.between these times. Anyone else

Hi folks, I've just noticed that imagery seemed to have stopped between 1815 and 2000 today. Its odd, because the tellique log indicates that files were being received and stored away, but the MDM

All, As most of you now know payment for both the tq(R)-TELLICAST software and the EKU [EUMETCast Key Unit] and software can now be made direct to EUMETSAT via credit card payments. EUMETSAT

John, you can use the TV/Data software from the Skystar 2 CDROM. You do need to install the driver and this software from the Technisat CDROM anyway, as it is not included anymore on the EUMETCAST

From_Odyseus@... writes: John, There are quite a number of FTA DVB channels from the Hot Bird 13 deg. location that you could use to check your alignment. For a print out of current FTA

writes: Hello Sergio, Yes, for those who registered (and were registered) with EUMETSAT during last year for the trials you are automatically registered for the operational service and so do not

of setting this up before the Eumetsat software/key arrives so that at least I'll know that the system is aligned and setup correctly?? would indicated correct alignment etc?? John, it's HotBird

Assuming I have got the skystar card, dish and lnb, is there a way of setting this up before the Eumetsat software/key arrives so that at least I'll know that the system is aligned and setup