|
Re: Today's transmissions
wrote:
It
(UTC).
Hi,
I confirm....
but my report is....
_______________________
Date: 2004-03-15
Missing HRIT & LRIT segments report
Cycle: 1045
msg-ch01, seg: 8
msg-ch02, seg: 7 8
wrote:
It
(UTC).
Hi,
I confirm....
but my report is....
_______________________
Date: 2004-03-15
Missing HRIT & LRIT segments report
Cycle: 1045
msg-ch01, seg: 8
msg-ch02, seg: 7 8
|
By
regolo <regolo@...>
·
#2197
·
|
|
Re: Today's transmissions
Same here. No uncorrected blocks in Setup4PC, but lots of missing
segments in MSG starting with today's 1045 cycle.
rgds.
Tim
Same here. No uncorrected blocks in Setup4PC, but lots of missing
segments in MSG starting with today's 1045 cycle.
rgds.
Tim
|
By
ltn_wx
·
#2194
·
|
|
Re: Today's transmissions
David,
wrote:
It
(UTC).
same here in Brussels, got lots of missing segments in the last three
scans or so.
Luca
David,
wrote:
It
(UTC).
same here in Brussels, got lots of missing segments in the last three
scans or so.
Luca
|
By
Luca Bertagnolio <lucaberta@...>
·
#2193
·
|
|
Re: Met8 update from Belgium
David,
wrote:
received
standard
that's exactly what has been done, a two PCs setup with the receiving
one under Linux and a Samba share of the /Tellique directory, so that
the Windows PC running
David,
wrote:
received
standard
that's exactly what has been done, a two PCs setup with the receiving
one under Linux and a Samba share of the /Tellique directory, so that
the Windows PC running
|
By
Luca Bertagnolio <lucaberta@...>
·
#2192
·
|
|
Today's transmissions
Folks,
Is it just me, or have there been breaks in transmissions today? It
is somewhat windy here, but I am only occasionally getting
uncorrected blocks and the Setup4PC icon is green. The
Folks,
Is it just me, or have there been breaks in transmissions today? It
is somewhat windy here, but I am only occasionally getting
uncorrected blocks and the Setup4PC icon is green. The
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#2191
·
|
|
Re: Met8 update from Belgium
--- In MSG-1@..., "Luca Bertagnolio" <lucaberta@y...>
wrote:
[]
> I am available to help those who would like to test Tellique under
Linux, now that I have enough experience on it.
>
>
--- In MSG-1@..., "Luca Bertagnolio" <lucaberta@y...>
wrote:
[]
> I am available to help those who would like to test Tellique under
Linux, now that I have enough experience on it.
>
>
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#2190
·
|
|
Met8 update from Belgium
Hi all,
I finally have received the EKU last friday, and set it up
effortlessly in about 5 minutes. Now I am up and running with
Tellique 2.3.1 and RTE 3.5.1, with SkyStar2 2.6B and 4.2.8
Hi all,
I finally have received the EKU last friday, and set it up
effortlessly in about 5 minutes. Now I am up and running with
Tellique 2.3.1 and RTE 3.5.1, with SkyStar2 2.6B and 4.2.8
|
By
Luca Bertagnolio <lucaberta@...>
·
#2189
·
|
|
Re: satrep
An excellent site, thank you :) There's a superb tie in between theory and a
bang up to date image under "Actual SATREP". With a picture worth a thousand
words the annotated cloud types are just what
An excellent site, thank you :) There's a superb tie in between theory and a
bang up to date image under "Actual SATREP". With a picture worth a thousand
words the annotated cloud types are just what
|
By
Chris Cadogan <chris@...>
·
#2188
·
|
|
Re: EKU Software
You beat me, Arne, mine has been running for only 40 days and ~6 hours,
and that reboot was caused by a public electricity failure!
http://www.david-taylor.myby.co.uk/mrtg/hermes_dvb.html
The system
You beat me, Arne, mine has been running for only 40 days and ~6 hours,
and that reboot was caused by a public electricity failure!
http://www.david-taylor.myby.co.uk/mrtg/hermes_dvb.html
The system
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#2187
·
|
|
Re: EKU Software
EKU
However all
matter as I
Hello Douglas,
I have been running TQ 2.3.1 and eToken RTE 3.00 from September.
My receive system runs 24x7, memory use is stable and I cannot
remember the last time I
EKU
However all
matter as I
Hello Douglas,
I have been running TQ 2.3.1 and eToken RTE 3.00 from September.
My receive system runs 24x7, memory use is stable and I cannot
remember the last time I
|
By
a_van_belle
·
#2186
·
|
|
Re: new member
Further to my last post:
Today I have spent several hours creating and running some extremely
large animations whilst still receiving and processing data, all on
the same PC.
I'm delighted to
Further to my last post:
Today I have spent several hours creating and running some extremely
large animations whilst still receiving and processing data, all on
the same PC.
I'm delighted to
|
By
ltn_wx
·
#2185
·
|
|
Re: EKU Software
By
Douglas Deans <douglas@...>
·
#2184
·
|
|
Re: Problem with Hidden devices in Windows XP and Skystar USB box
Hi Arne ...
Your set devmgr_.... command hint is very helpful indeed. I have
wondered how to view the status of my non-connected USB device drivers
and this does the trick. Thank you very much for
Hi Arne ...
Your set devmgr_.... command hint is very helpful indeed. I have
wondered how to view the status of my non-connected USB device drivers
and this does the trick. Thank you very much for
|
By
Thomas Findlay <tom@...>
·
#2183
·
|
|
Re: Problem with Hidden devices in Windows XP and Skystar USB box
This sounds similar to a problem I had with a terrestrial TV card.
The recommendation was to boot into safe mode and then remove the
drivers which should be visible and may even reveal more that
This sounds similar to a problem I had with a terrestrial TV card.
The recommendation was to boot into safe mode and then remove the
drivers which should be visible and may even reveal more that
|
By
Roger Beever <g6ckr@...>
·
#2182
·
|
|
Problem with Hidden devices in Windows XP and Skystar USB box
Hello All,
A friend is using a notebook and the Skystar USB receiver for
Eumetcast. Although it did work fine in the beginning, lately he
experienced a lot of problems.
The Skystar USB box is not
Hello All,
A friend is using a notebook and the Skystar USB receiver for
Eumetcast. Although it did work fine in the beginning, lately he
experienced a lot of problems.
The Skystar USB box is not
|
By
a_van_belle
·
#2181
·
|
|
Re: MPEF data
but as
amateurs have
data.
Robert,
I think, as David says (and others), we will have to make do with
POSSE. If you do not have POSSE at present it is obtainable
but as
amateurs have
data.
Robert,
I think, as David says (and others), we will have to make do with
POSSE. If you do not have POSSE at present it is obtainable
|
By
seggins2000 <seggins2000@...>
·
#2180
·
|
|
Why MSG-1 solar outage when there are two ground stations?
Folks,
My understanding was that for MSG-1 there were two ground stations,
located in different countries. If this is the case, then why can't
there be some sort of diversity reception during the
Folks,
My understanding was that for MSG-1 there were two ground stations,
located in different countries. If this is the case, then why can't
there be some sort of diversity reception during the
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#2179
·
|
|
Re: new member
Hello Roland and welcome from me too.
Firstly, let me say you've come to the right place for help and
advice. I'm also a "newbie" and have received nothing but fast,
friendly, informative replies
Hello Roland and welcome from me too.
Firstly, let me say you've come to the right place for help and
advice. I'm also a "newbie" and have received nothing but fast,
friendly, informative replies
|
By
ltn_wx
·
#2178
·
|
|
Re: my questions
wrote:
But do listen to the comments of others as well - I only have
experience of a limited number of receiving systems.
pictures then I would face the problem of orientating properly the
sat
wrote:
But do listen to the comments of others as well - I only have
experience of a limited number of receiving systems.
pictures then I would face the problem of orientating properly the
sat
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#2177
·
|
|
my questions
Good morning, David. Thank you very much for your detailed prompt
reply which is most useful to me !!
May I bother you with another question re locating Meteosat.
Should I decide to still get access
Good morning, David. Thank you very much for your detailed prompt
reply which is most useful to me !!
May I bother you with another question re locating Meteosat.
Should I decide to still get access
|
By
loophunter <roland.fechter@...>
·
#2176
·
|