|
Re: I can not open FTP
From: caucheteux.m@...
Hello, I can not open FTP would you have a solution?
thank you
=================================
No-name,
I suspect that the proxy server should be
From: caucheteux.m@...
Hello, I can not open FTP would you have a solution?
thank you
=================================
No-name,
I suspect that the proxy server should be
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#28272
·
|
|
I can not open FTP
Hello, I can not open FTP would you have a solution?
thank you
Hello, I can not open FTP would you have a solution?
thank you
|
By
caucheteux.m@...
·
#28271
·
|
|
Re: GOES-16 and GOES-17 stopped after 14:00?
As Douglas says this is an issue with the connection EUMETSAT use to get the data from NOAA. We don't use EUMETCAST for GOES and our data is arriving without problems, so the satellites are fine.
As Douglas says this is an issue with the connection EUMETSAT use to get the data from NOAA. We don't use EUMETCAST for GOES and our data is arriving without problems, so the satellites are fine.
|
By
simonproud <simon.proud@...>
·
#28270
·
|
|
Re: GOES-16 and GOES-17 stopped after 14:00?
Same here David
Robert
By
Robert Moore
·
#28269
·
|
|
Re: GOES-16 and GOES-17 stopped after 14:00?
=======================================================================
There was an alert message from Eumetsat about PDA maintenance affecting GOES 16/17. It was hoped to be over by 17.00 UTC but
=======================================================================
There was an alert message from Eumetsat about PDA maintenance affecting GOES 16/17. It was hoped to be over by 17.00 UTC but
|
By
Douglas Deans
·
#28268
·
|
|
Re: GOES-16 and GOES-17 stopped after 14:00?
Five minutes ago I'd fired up Animator and only saw a 1400 image for GOES16 - so phew from me as I was about to dig further.
James
Five minutes ago I'd fired up Animator and only saw a 1400 image for GOES16 - so phew from me as I was about to dig further.
James
|
By
James Brown
·
#28267
·
|
|
GOES-16 and GOES-17 stopped after 14:00?
I'm hoping it's not just me, but GOES-16 and GOES-17 data stopped after the 14:00 instalment. I thought someone might have mentioned that, or is it another scheduled outage I've forgotten about!
It
I'm hoping it's not just me, but GOES-16 and GOES-17 data stopped after the 14:00 instalment. I thought someone might have mentioned that, or is it another scheduled outage I've forgotten about!
It
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#28266
·
|
|
Re: Sentinel 3B SLSTR
=====================================================
Thanks for reply Graham.
Regards
Ian.
=====================================================
Thanks for reply Graham.
Regards
Ian.
|
By
Ian Deans
·
#28265
·
|
|
Re: Sentinel 3B SLSTR
Hi Ian
Same here - no data received yet
Kind Regards
Graham
Hi Ian
Same here - no data received yet
Kind Regards
Graham
|
By
Graham Woolf
·
#28264
·
|
|
Sentinel 3B SLSTR
The above data Level-2 Sea Surface Temperature products for Sentinel 3B was due to start today 12/3/2019 on E2H-S3B-04 but as yet I have seen no data.
I assume no one else is seeing this data and the
The above data Level-2 Sea Surface Temperature products for Sentinel 3B was due to start today 12/3/2019 on E2H-S3B-04 but as yet I have seen no data.
I assume no one else is seeing this data and the
|
By
Ian Deans
·
#28263
·
|
|
Re: EUMETCastView v1.3.7
=========================================================================
You are very welcome James. We love the Welsh up here (despite the score !), it is certain Scottish politicians I cannot be
=========================================================================
You are very welcome James. We love the Welsh up here (despite the score !), it is certain Scottish politicians I cannot be
|
By
Douglas Deans
·
#28262
·
|
|
Re: EUMETCastView v1.3.7
Excellent Douglas, thank you very much. I’ll give it a go.
Surprised you are still communicating with a Welshman though ;-))
James
JB out and about
Excellent Douglas, thank you very much. I’ll give it a go.
Surprised you are still communicating with a Welshman though ;-))
James
JB out and about
|
By
James Brown
·
#28261
·
|
|
Re: EUMETCastView v1.3.7
========================================================================
James when there is a lot of segments I switch off 'show all segments' and then run through them all by using the right hand
========================================================================
James when there is a lot of segments I switch off 'show all segments' and then run through them all by using the right hand
|
By
Douglas Deans
·
#28260
·
|
|
Re: EUMETCastView v1.3.7
When showing the NOAA20 VIIRS band on the 3D globe with all show all segments, is there a way to separate ascending from descending passes? I must be missing something because with all the overlaps I
When showing the NOAA20 VIIRS band on the 3D globe with all show all segments, is there a way to separate ascending from descending passes? I must be missing something because with all the overlaps I
|
By
James Brown
·
#28259
·
|
|
Re: Roll-out of new EUMETCast Client Software (Tellicast), EKU hardware and drivers from 22 Feb
David
It is my understanding that for Windows you have 32Bit and 64Bit versions of the new EKU software but only one 32Bit *.msi installer for the TC-client. So this most probably contains a 32Bit
David
It is my understanding that for Windows you have 32Bit and 64Bit versions of the new EKU software but only one 32Bit *.msi installer for the TC-client. So this most probably contains a 32Bit
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#28258
·
|
|
Re: Roll-out of new EUMETCast Client Software (Tellicast), EKU hardware and drivers from 22 Feb
Ernst,
i run the new 64-bit EKU Software with the new 32-bit TC-Client on Windows 10 without Problems.
Cheers,
Thorsten
Ernst,
i run the new 64-bit EKU Software with the new 32-bit TC-Client on Windows 10 without Problems.
Cheers,
Thorsten
|
By
Thorsten Miglus
·
#28257
·
|
|
Re: Roll-out of new EUMETCast Client Software (Tellicast), EKU hardware and drivers from 22 Feb
David
It is my understanding that for Windows you have 32Bit and 64Bit versions of the new EKU software but only one 32Bit *.msi installer for the TC-client. So this most probably contains a 32Bit
David
It is my understanding that for Windows you have 32Bit and 64Bit versions of the new EKU software but only one 32Bit *.msi installer for the TC-client. So this most probably contains a 32Bit
|
By
Ernst Lobsiger
·
#28256
·
|
|
Re: Roll-out of new EUMETCast Client Software (Tellicast), EKU hardware and drivers from 22 Feb
Dear All
Up to now we have worked with 32Bit TC/EKU software even under 64Bit GNU/Linux.
The new native 64Bit GUN/Linux TC/EKU software seems to be a real step forward.
I now have for the first time
Dear All
Up to now we have worked with 32Bit TC/EKU software even under 64Bit GNU/Linux.
The new native 64Bit GUN/Linux TC/EKU software seems to be a real step forward.
I now have for the first time
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#28255
·
|
|
Re: Roll-out of new EUMETCast Client Software (Tellicast), EKU hardware and drivers from 22 Feb
Hi Ernst,
The latest version looks indeed very promising . I didn't found the time yet to install it. Life gets in the way ....
cheers,
Hugo
Hi Ernst,
The latest version looks indeed very promising . I didn't found the time yet to install it. Life gets in the way ....
cheers,
Hugo
|
By
Hugo
·
#28254
·
|
|
Re: Roll-out of new EUMETCast Client Software (Tellicast), EKU hardware and drivers from 22 Feb
Dear All
Up to now we have worked with 32Bit TC/EKU software even under 64Bit GNU/Linux.
The new native 64Bit GUN/Linux TC/EKU software seems to be a real step forward.
I now have for the first time
Dear All
Up to now we have worked with 32Bit TC/EKU software even under 64Bit GNU/Linux.
The new native 64Bit GUN/Linux TC/EKU software seems to be a real step forward.
I now have for the first time
|
By
Ernst Lobsiger
·
#28253
·
|