|
Re: MET-5 data
--- In MSG-1@..., "Douglas Deans" <douglas@d...> wrote:
[] David when I ticked use MTP Met-5 data all the MTP files residingin Tellique disappeared but without any images being seen or saved anywhere. For the moment is the program just clearing them out ? No, it _should_ be processing them and putting them in the same folder as usual (for Met-5 FSD). Possibly if you had more recent data there from the 3-hourly cycle, earlier data would have been skipped. I had a 16:30 set (although only one segment of 16:00, a visible one). If things are now fixed, I would expect the 18:00 data to be the next distributed, named as MSG. I may get some half-hourly data (tied to my user-ID) as the system is tested out, and then it will be publicly released, perhaps wilt a parallel running period. As you will know, at some point in the future Met-7 data may be available in the same way. Cheers, David |
|
|
|
Re: MET-5 data
Douglas Deans <douglas@...>
toggle quoted message
Show quoted text
----- Original Message -----
From: "David Taylor" <david-taylor@...> To: <MSG-1@...> Sent: Tuesday, February 10, 2004 3:20 PM Subject: [MSG-1] Re: MET-5 data good, looking forward to testing the new beta later in theafternoon!... now available.... David when I ticked use MTP Met-5 data all the MTP files residing in Tellique disappeared but without any images being seen or saved anywhere. For the moment is the program just clearing them out ? Regards Douglas. |
|
|
|
MET-5 data
A bunch of Met5 files have not been recognized by MDM, starting atFolks, as you will have realised, changes made for a test of Met-5 data at more frequent intervals did not go quite as planned, but are currently being resolved. Eumetsat do know about the problem. Cheers, David |
|
|
|
Re: MET-5 data
good, looking forward to testing the new beta later in theafternoon! ... now available.... Ciao, David |
|
|
|
Re: MET-5 data
Luca Bertagnolio <lucaberta@...>
David,
--- In MSG-1@..., "David Taylor" <david-taylor@b...> wrote: No, C_ means compressed. These files are from a test of half-hourly Met-5 data, and I am writing an update to the MSG Data Managerright now to handle this data. I believe it may not have been meant forgood, looking forward to testing the new beta later in the afternoon! ;-) Ciao, Luca |
|
|
|
MET-5 data
--- In MSG-1@..., "Luca Bertagnolio" <lucaberta@y...>
wrote: A bunch of Met5 files have not been recognized by MDM, starting at1300 and 1330.intended for encrypted data only? No, C_ means compressed. These files are from a test of half-hourly Met-5 data, and I am writing an update to the MSG Data Manager right now to handle this data. I believe it may not have been meant for public consumption just yet..... Cheers, David |
|
|
|
(No subject)
Luca Bertagnolio <lucaberta@...>
A bunch of Met5 files have not been recognized by MDM, starting at
1049 UTC: L-000-MTP___-MET5________-VIS006___-PRO______-200402101030-__ L-000-MTP___-MET5________-VIS006___-000001___-200402101030-C_ and then other Met5 scans in VIS, IR and WV at 1100, 1130, 1230, 1300 and 1330. Any idea of what's going on? Isn't the final "-C_" suffix intended for encrypted data only? Bye, Luca |
|
|
|
MSG Data Manager, MSG Animator - new released versions
Folks,
There are new versions of the MSG Data Manager and the MSG Animator available for download from: http://www.satsignal.net => Software, What's New? These reflect the beta versions that have been stable to the last couple of weeks or so, and are recommended upgrades for all current users. Thanks for all the improvements you recommended. Cheers, David -- Quality software written to your requirements Web: http://www.satsignal.net Email: davidtaylor@... |
|
|
|
Re: Met 8
James Brown
In message <001d01c3efc7$9fb2ee60$eeeea8c0@ian>, Ian S Deans <ian@...> writes
Appears to be some slight problems this morning. Some of the cycles ( notI'm sure I felt a myself leaping out of the seat at the time... did something hit the earth I wonder :-))) James -- James Brown |
|
|
|
Met 8
Ian S Deans <ian@...>
Appears to be some slight problems this morning. Some of the cycles ( not
monitored all ) are taking a little longer than usual ( ie 10.45 completed 11.02 ) and 10.15 cycle was time stamped at 10.14 requiring a rename on saved images to avoid animation problems. Country outlines also went a little adrift, although they appear now to be slowly returning to normal with each cycle. Met 5 also now in with 10.00 time. Ian |
|
|
|
Re: MSG-1/Meteosat-8 data reception.
johnrigsec@...
In a message dated 07-02-04 11:38:24 GMT Standard Time, g.kru@...
writes: Bonjour John,Bonjour Gerard, Thanks for your information. Regards, John Tellick. |
|
|
|
Improvements
Lawrence <lawrence@...>
Recently my receive computer (1.5GHz) failed with several components,
after only two years use, so I decided to upgrade. The receive machine was previously my main computer - a 2.4GHz AMD - and is now used to receive M-8 and do a few other things. I have noticed a huge improvement in operations. With a reasonable signal strength, the number of missing segments has vanished! Although not yet optimised, things are distinctly better. The next job is to fix the dish permanrently, after maximising the signal. Then I am going to try a USB receiver..... best wishes to all. Lawrence Harris |
|
|
|
Re: MSG-1/Meteosat-8 data reception.
g.kruger <g.kru@...>
Bonjour John,
toggle quoted message
Show quoted text
Yes, in France the "license" is free of charge and the duration is 3 years. Cheers Gerard F6BEK ----- Original Message -----
From: johnrigsec@... To: WXSAT-L@... ; rig-l@... ; MSG-1@... Sent: Friday, February 06, 2004 10:01 PM Subject: [MSG-1] MSG-1/Meteosat-8 data reception. Has anyone [amateur/educational users] in countries OUTSIDE of UK, Holland, Belgium, Germany, Spain, Italy and France, taken part in the MSG trials and or now registered for Meteosat-8 EUMETCast dissemination? It would be useful to know how your licenses have been dealt with - any fees/handling charges and the period of license that has been issued. Regards, John Tellick. RIG. Yahoo! Groups Sponsor ADVERTISEMENT ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/MSG-1/ b.. To unsubscribe from this group, send an email to: MSG-1-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. |
|
|
|
MSG-1/Meteosat-8 data reception.
johnrigsec@...
Has anyone [amateur/educational users] in countries OUTSIDE of UK, Holland,
Belgium, Germany, Spain, Italy and France, taken part in the MSG trials and or now registered for Meteosat-8 EUMETCast dissemination? It would be useful to know how your licenses have been dealt with - any fees/handling charges and the period of license that has been issued. Regards, John Tellick. RIG. |
|
|
|
Re: MSG License: good news from Belgium
johnrigsec@...
In a message dated 06-02-04 15:53:18 GMT Standard Time,
david-taylor@... writes: GB, NL, B, I, FR - no chargeDavid, This does now appear to be the current situation [charges] however, length of license now seems to be a bit vague in some countries. So, an informal chat on Monday might be very useful. Regards, John Tellick. |
|
|
|
Re: MSG License: good news from Belgium
I said that there is no user charge in Belgium.Is there a charge in Belguim?you must have missed my reply in an earlier message (#1720), where ) Yes, thanks Luca. I think it was during the "you have been spammed" episode, so I apologise. So it is now looking like: GB, NL, B, I, FR - no charge D, ESP - charge An opportunity has arisen to perhaps talk informally about this, and try and get the costs for German and Spanish amateurs reduced, if not even eliminated. Cheers, David |
|
|
|
Re: MSG License: good news from Belgium
johnrigsec@...
In a message dated 05-02-04 08:20:00 GMT Standard Time, lucaberta@...
writes: I am not sure if there is minimum or maximum time to ask for theHi Luca, Good news your licenses have arrived - and three! The third will obviously save IRM/KMI having to inform EUMETSAT that you are licensed. The UK licenses run for three years from 1st February 2004 to 31st January 2007. Colin Cuthbert said this was just an arbitrary figure to get things moving and to see if users wished to continue to be licensed after this period or drop out. We now know DWD is only issuing yearly licenses and some are charging handling fees so the situation appears far from clear. Ask IRM/KMI for a 10 year license and see what they say? Regards, John Tellick. RIG. |
|
|
|
Re: MSG License: good news from Belgium
Luca Bertagnolio <lucaberta@...>
David,
--- In MSG-1@..., "David J Taylor" <david-taylor@b...> wrote: In Spain and Germany, there seems be an annual charge, but not inUK, NL, I.you must have missed my reply in an earlier message (#1720), where I said that there is no user charge in Belgium. I sent my signed paperwork to both IRM/KMI and EUMETSAT today! :-) Bye, Luca |
|
|
|
MSG-1 resolution (again)
Lawrence <lawrence@...>
Yes, I do exactly this for astronomy. You can get an excellent idea of cloud cover and now-casting for telescope use. I have noticed that some cloud is almost see-through. regards Lawrence Harris |
|
|
|
Re: Trouble with tellique
a_van_belle
--- In MSG-1@..., "Nahum Mendez Chazarra"
<nahum_chazarra@y...> wrote: .... is in no place, does anybody knows where it is?.Hello Nuham, "Cannot join channel DWDSAT" looks like you have the wrong PID's entered. Enter PID 100,300 and 301 in the Technisat SETUP4PC Data Services screen. Your trial username should be valid until March 02, you don't need new software although TQ 2.3.1a is recommended. TQ software can only be acquired at Eumetsat and is not available for download. Greetings, Arne van Belle |
|
|