|
Re: FSD Data
--- In MSG-1@..., "Douglas Deans" <douglas@d...> wrote:
Amazing how quickly the FSD data is in when there is no MSG SEVIRIdata (LRIT specifically). Although it didn't stop the IR prolog being delayed until _after_ IR segment 3 on Meteosat 5..... Presumably a priority/bandwidth issue (channel 3), although aslong as all is in before the next 3 hourly is due perhaps it is not too important (for the amateurs anyway !). Douglas, I think that there may be problems resulting from trying to cram too much down data channel 3, possibly the sequence errors we see on Met- 5 and some MPEF products. What will happen on MSG-2 and MSG-3 where these bandwidths are fixed and not adjustable? I guess that as dissemination will be via Hotbird, the limited bandwidth won't matter. Just a thought, though. David
|
|
|
|
FSD Data
Douglas Deans <douglas@...>
Amazing how quickly the FSD data is in when there is no MSG SEVIRI data
(LRIT specifically). Presumably a priority/bandwidth issue (channel 3), although as long as all is in before the next 3 hourly is due perhaps it is not too important (for the amateurs anyway !). Regards Douglas.
|
|
|
|
Re: Sailing Channel gone?
dave
Hi Luca No problems watching the sailing channel this morning about 10:00am GMT ----Dave-----
toggle quoted messageShow quoted text
----- Original Message -----
From: Luca Bertagnolio To: MSG-1@... Sent: Monday, January 05, 2004 8:06 PM Subject: [MSG-1] Sailing Channel gone? Am I the only one not able to lock onto the Sailing Channel on the same Deutsche Telekom transponder as EUMETCast? My receiver now shows "service unknown" instead of the channel name... too bad if the got rid of it, it was a nice way to check if the whole transponder stream was working OK. Bye, Luca Brussels, Belgium Yahoo! Groups Sponsor ADVERTISEMENT ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/MSG-1/ b.. To unsubscribe from this group, send an email to: MSG-1-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|
|
|
|
Re: Sailing Channel gone?
Luca Bertagnolio <lucaberta@...>
Ian,
I did a rescan of the transponder, and infact it is gone. :-( Kurdsat will then become by "beacon" channel, and hopefully "Breaking the Ice" will stay on the transponder, as it is probably much nicer, given the promos being broadcasted just now. Sailing Channel is still available FTA on 11200V. Bye, Luca --- In MSG-1@..., "Ian S Deans" <ian@i...> wrote: Hi Luca,has been encrypted. However you can tune into Kurdsat which is also on 11096,
|
|
|
|
Re: Sailing Channel gone?
Ian S Deans <ian@...>
Hi Luca,
Yes the Sailing Channel is no longer available FTA -- I suspect it has been encrypted. However you can tune into Kurdsat which is also on 11096, although Sailing Channel did look better !! Regards Ian.
|
|
|
|
Re: mid day today
Douglas Deans <douglas@...>
toggle quoted messageShow quoted text
----- Original Message -----
From: "David Taylor" <david-taylor@...> To: <MSG-1@...> Sent: Monday, January 05, 2004 7:37 PM Subject: [MSG-1] Re: mid day today --- In MSG-1@..., Robert Moore <rsmoore@l...> wrote:Has anyone looked at an IR animation for the Biscay area today?Around noon, lines emerged - either ships' trails of aircraft Most interesting. I have been watching it all day. What really surprises me is how it forms and looks in a Channel 5 WV animation. Regards Douglas.
|
|
|
|
Sailing Channel gone?
Luca Bertagnolio <lucaberta@...>
Am I the only one not able to lock onto the Sailing Channel on the
same Deutsche Telekom transponder as EUMETCast? My receiver now shows "service unknown" instead of the channel name... too bad if the got rid of it, it was a nice way to check if the whole transponder stream was working OK. Bye, Luca Brussels, Belgium
|
|
|
|
Re: mid day today
John Thexton <john@...>
I have watched this from 8am they originate from around Madrid i think aircraft con trails they persisted over 6hrs revolving clockwise
toggle quoted messageShow quoted text
in high pressure over spain. john
----- Original Message -----
From: David Taylor To: MSG-1@... Sent: Monday, January 05, 2004 7:37 PM Subject: [MSG-1] Re: mid day today --- In MSG-1@..., Robert Moore <rsmoore@l...> wrote: > Has anyone looked at an IR animation for the Biscay area today? Around noon, lines emerged - either ships' trails of aircraft contrails (the latter, I would think) that appeared to rotate like the spokes of a wheel - presumably in the upper atmosphere. > Any thoughts on this? I haven't animated this - it sounds great! Looking at the static images I think aircraft trails, as you can see the shadow of some of the trails on the lower clouds. The dispersion does look more like ship trails, though. Cheers, David ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/MSG-1/ b.. To unsubscribe from this group, send an email to: MSG-1-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
|
|
|
|
Re: mid day today
--- In MSG-1@..., Robert Moore <rsmoore@l...> wrote:
Has anyone looked at an IR animation for the Biscay area today?Around noon, lines emerged - either ships' trails of aircraft contrails (the latter, I would think) that appeared to rotate like the spokes of a wheel - presumably in the upper atmosphere. Any thoughts on this?I haven't animated this - it sounds great! Looking at the static images I think aircraft trails, as you can see the shadow of some of the trails on the lower clouds. The dispersion does look more like ship trails, though. Cheers, David
|
|
|
|
Re: mid day today
Alan Sewards <alan.sewards@...>
Robert,
toggle quoted messageShow quoted text
I also saw that phenomenon. It seemed as though the lines started off in mid-Spain heading east-west (or the inverse), and were rotated round and moved north by the low embedded in the jet stream. I took them to be aircraft contrails. Best regards - Alan
----- Original Message -----
From: "Robert Moore" <rsmoore@...> To: <MSG-1@...> Sent: Monday, January 05, 2004 6:50 PM Subject: [MSG-1] mid day today Has anyone looked at an IR animation for the Biscay area today? Aroundnoon, lines emerged - either ships' trails of aircraft contrails (the latter, Iwould think) that appeared to rotate like the spokes of a wheel - presumably inthe upper atmosphere.
|
|
|
|
mid day today
Robert Moore
Has anyone looked at an IR animation for the Biscay area today? Around noon,
lines emerged - either ships' trails of aircraft contrails (the latter, I would think) that appeared to rotate like the spokes of a wheel - presumably in the upper atmosphere. Any thoughts on this? Will there be any limit to the amazing things are we going to see through MSG-1? Robert ------------------------------ Robert Moore tel and fax: 44 (0) 1352 714456
|
|
|
|
Re: Tellique and the newer Intel & AMD processors
g.kruger <g.kru@...>
David,
toggle quoted messageShow quoted text
The Hyperthreading feature of my PC is turned on and I did not get something working wrong. I use a 3.2 PC, HP enabled and memory is 1024 Cheers Gรฉrard
----- Original Message -----
From: David Taylor To: MSG-1@... Sent: Sunday, January 04, 2004 3:15 PM Subject: [MSG-1] Tellique and the newer Intel & AMD processors Folks, I note from the release notes that the Tellique software does not work with the Hyperthreading feature of newer processors enabled. Indeed, I turned that feature off in the BIOS on my latest PC. Has anyone tried the software with Hyperthreading enabled? (Recent Pentium 4 processors have this "HT" feature.) Looking ahead, has anyone tested with the AMD 64-bit processors? These are now on sale and being offered to new PC purchasers. I would hate to think of someone spending a large amount of money only to find the software didn't work! Cheers, David ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/MSG-1/ b.. To unsubscribe from this group, send an email to: MSG-1-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. [Non-text portions of this message have been removed]
|
|
|
|
Re: Tellique and the newer Intel & AMD processors
Roger Mawhinney <roger@...>
I was at a recent seminar (October 2003) in an Intel fabrication plant and
toggle quoted messageShow quoted text
whilst Hyperthreading was not the main topic, it was discussed. It should work quite transparently with Windows XP, taking advantage of those operations that specifically support it such as Microsoft Internet Explorer. In essence, your normal application should run as usual, but applications such as IE run as if using a second processor. I saw demos using Microsoft Office, Abode Reader and a few other applications all loading and running very fast indeed - well they would since it was Intel running them! I would venture to suggest however, that the motherboard may need to be using Intel's latest chipset. Also make sure you've got all the latest XP upgrades and patches from Microsoft and drivers for your PC. Roger
|-----Original Message-----
|From: David Taylor [mailto:david-taylor@...] |Sent: 04 January 2004 14:15 |To: MSG-1@... |Subject: [MSG-1] Tellique and the newer Intel & AMD processors | |Folks, | |I note from the release notes that the Tellique software does |not work with the Hyperthreading feature of newer processors enabled. |Indeed, I turned that feature off in the BIOS on my latest PC. | Has anyone tried the software with Hyperthreading enabled? |(Recent Pentium 4 processors have this "HT" feature.) | |Looking ahead, has anyone tested with the AMD 64-bit processors? |These are now on sale and being offered to new PC purchasers. |I would hate to think of someone spending a large amount of |money only to find the software didn't work! | |Cheers, |David | | | | |Yahoo! Groups Links | |To visit your group on the web, go to: | http://groups.yahoo.com/group/MSG-1/ | |To unsubscribe from this group, send an email to: | MSG-1-unsubscribe@... | |Your use of Yahoo! Groups is subject to: | http://docs.yahoo.com/info/terms/ | | |
|
|
|
|
Re: Tellique and the newer Intel & AMD processors
Guy Martin <agm@...>
Most software isn't written to make use of hyperthreading and as you pointed out some actually fails. In fact most software can't make use of multi-processing. We are (work this is) replacing 100 clients in the summer. 64 bit is an option, if anyone has one let we know what it does, or more importantly doesn't.
toggle quoted messageShow quoted text
Cheers, Guy
----- Original Message -----
From: David Taylor To: MSG-1@... Sent: Sunday, January 04, 2004 2:15 PM Subject: [MSG-1] Tellique and the newer Intel & AMD processors Folks, I note from the release notes that the Tellique software does not work with the Hyperthreading feature of newer processors enabled. Indeed, I turned that feature off in the BIOS on my latest PC. Has anyone tried the software with Hyperthreading enabled? (Recent Pentium 4 processors have this "HT" feature.) Looking ahead, has anyone tested with the AMD 64-bit processors? These are now on sale and being offered to new PC purchasers. I would hate to think of someone spending a large amount of money only to find the software didn't work! Cheers, David ------------------------------------------------------------------------------ Yahoo! Groups Links a.. To visit your group on the web, go to: http://groups.yahoo.com/group/MSG-1/ b.. To unsubscribe from this group, send an email to: MSG-1-unsubscribe@... c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. ---------- http://www.gordano.com - Messaging for educators.
|
|
|
|
Re: Tellique and the newer Intel & AMD processors
fvalk <fvalk@...>
I had read the hyperthreading note as well and had it initially disabled.
toggle quoted messageShow quoted text
However once my new PC had become stable I decided to activate it again. Over a period of about 3 weeks now I didn't get a single disruption, alarm or unexplained lost segment. So it may not be officially supported (tested?) but it certainly does work in my system. On 64 bit CPU I can not tell you. Cheers, Ferdinand
---------- Original Message -----------
From: "David Taylor" <david-taylor@...> To: MSG-1@... Sent: Sun, 04 Jan 2004 14:15:26 -0000 Subject: [MSG-1] Tellique and the newer Intel & AMD processors Folks,------- End of Original Message -------
|
|
|
|
Re: Tellique and the newer Intel & AMD processors
--- In MSG-1@..., "gerald ashford" <gerald.ashford@n...>
wrote: davidhyperthreading auto or disabled my computer is set to auto and every thing is ok nice pictures. my computer is 2.4cpu 1gig memory may be the 1gig mem helps tokeep it working geraldThanks for the report. It only applies to the PC with the DVB card and Tellique software installed. Hyperhtreading is only enabled with Windows XP, service pack 1, I believe. The check is to see if, when running the Windows Task Manager, Performance tab, two CPU usage plots are displayed side-by-side or just one. As I said, I don't have direct experience of this, just what I saw in the release notes. If it actually does work OK, great! Cheers, David
|
|
|
|
Imminent disruptions
Folks,
A reminder that the next two weeks see some interruptions to images, particularly on Tuesday and Friday. I expect to see a normal flow of Foreign Satellite Data, but the products derived from MSG-1 data will be interrupted. Cheers, David This was the Weekly Schedule Report for Week 52/2003 Issued 15:22 18/12/03: Activities planned for week 02: There will be an MSG-1 decontamination starting on the 06/01/04. This procedure will have the following impact on SEVIRI imaging. 06/01/04 from 08:30 until 11:15 there will be no SEVIRI data available. 06/01/04 from 11:15 until 09/01/04 12:00 only VIS channels will available with degraded quality. 09/01/04 from 12:00 until 09/01/04 13:15 no SEVIRI data available. 09/01/04 from 13:15 until 13/01/04 09:00 SEVIRI images available with degraded quality 13/01/04 09:00 Nominal SEVIRI images resume Activities planned for week 03: 13/01/04 09:00 End of decontamination nominal SEVIRI images resume. MSG-1 relocation manoeuvre to 3.4 deg. West will begin on 14/01/04. The drift will last 14 days and will be stopped on 27/01/04. There may be some degradation to the images during the manoeuvre, users will be informed of the impact during the relocation period.
|
|
|
|
Re: Tellique and the newer Intel & AMD processors
gerald ashford <gerald.ashford@...>
david
i dont know if i'm looking at the right thing but my p4 has hyperthreading auto or disabled my computer is set to auto and every thing is ok nice pictures my computer is 2.4cpu 1gig memory may be the 1gig mem helps to keep it working gerald
|
|
|
|
Tellique and the newer Intel & AMD processors
Folks,
I note from the release notes that the Tellique software does not work with the Hyperthreading feature of newer processors enabled. Indeed, I turned that feature off in the BIOS on my latest PC. Has anyone tried the software with Hyperthreading enabled? (Recent Pentium 4 processors have this "HT" feature.) Looking ahead, has anyone tested with the AMD 64-bit processors? These are now on sale and being offered to new PC purchasers. I would hate to think of someone spending a large amount of money only to find the software didn't work! Cheers, David
|
|
|
|
Re: Two PC's and MSG
sbu979r
Hi John,
Thanks for that info, I'll give it a try. Regards, Basil
|
|
|