1. MSG-1@groups.io
  2. Messages
   Date   
Re: AMSU-A/AMSU-B/HIRS

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

--- In MSG-1@..., "seggins2000" <seggins2000@y...> wrote:
David,

I have not received any of these since 11/02. I am suspicious
that this lack coincides with my change of user name and password.
I was receiving them before. Am I correct?

John, I don't know - I am not monitoring EARS data right now.
Better check with EUMETSAT. You could ask on the Yahoo ATOVS group.

In addition, the received directory of the T-systems folder has
empty, dated, directories in it. The last ATOVS were in the main
received directory and the dated directories, although updated,
remained steadfastly empty. I have cut and pasted them into "11"
directory.
I haven't seen any dated directories in C;&#92;Tellique&#92;received here.

If the boxes in the MPEF section of data manager are checked where
does the program put the precessed files and how can I study the
results? (they are all being received).
If your normal image data was in: C:&#92;MSG&#92;images&#92;, then any MPEF
data would be in: C:&#92;MSG&#92;MPEF&#92;. You will find JPEG images, and GRB
and BUFR format files. There was a discussion earlier on this list
about software to process these files. However, you may be
receiving them in error, as they are supposed to be only for
National Weather Services.

Cheers,
David
AMSU-A/AMSU-B/HIRS

seggins2000 <seggins2000@...>
 

David,

I have not received any of these since 11/02. I am suspicious that
this lack coincides with my change of user name and password. I was
receiving them before. Am I correct?

In addition, the received directory of the T-systems folder has
empty, dated, directories in it. The last ATOVS were in the main
received directory and the dated directories, although updated,
remained steadfastly empty. I have cut and pasted them into "11"
directory.

If the boxes in the MPEF section of data manager are checked where
does the program put the precessed files and how can I study the
results? (they are all being received).

Regards

John Say
Re: Question

Ap van Weeren
 

Tks David, understood, that thing abt the date of issue was only
after a week from home the first thing I do is to check on your site
if there is any change of the programs e.g. the Beta's, after that I
check the messages in the list, so when dates are there you can see
immediately if there was any change during your absence. Not
important of course. OK David tks as always for your fine work.
All the best,
Ap

--- In MSG-1@..., "David Taylor" <david-taylor@b...>
wrote:
--- In MSG-1@..., Ap van Weeren <apvweeren@y...> wrote:
David, it is possible to put the date of issue of the beta
versions behind the version nrs, in your site. So it is easily to
check if the beta is already downloaded?

No, because the version number tells you if you already have the
version. A beta may be changed at any time, but the version
number
should be updated.

Secobd question: is it possible to have the date/time stamp in
GSS
give the same size as in the 1:1 pic. It becomes veryblarge in the
zommed pics.
Mni tks, gr,
Ap
I think you should find that when the picture is saved, the
timestamp takes on the correct size, If not, just alter the
default
zoom setting for the job.

Cheers,
David
Re: Question

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

--- In MSG-1@..., Ap van Weeren <apvweeren@y...> wrote:
David, it is possible to put the date of issue of the beta
versions behind the version nrs, in your site. So it is easily to
check if the beta is already downloaded?

No, because the version number tells you if you already have the
version. A beta may be changed at any time, but the version number
should be updated.

Secobd question: is it possible to have the date/time stamp in GSS
give the same size as in the 1:1 pic. It becomes veryblarge in the
zommed pics.
Mni tks, gr,
Ap
I think you should find that when the picture is saved, the
timestamp takes on the correct size, If not, just alter the default
zoom setting for the job.

Cheers,
David
Question

Ap van Weeren
 

David, it is possible to put the date of issue of the
betaversions behind the version nrs, in your site. So
it is easily to check if the beta is already
downloaded?
Secobd question: is it possible to have the date/time
stamp in GSS give the same size as in the 1:1 pic. It
becomes veryblarge in the zommed pics.
Mni tks, gr,
Ap

__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html
Re: reinstalling

Robert Moore
 

Quoting David Taylor <david-taylor@...>:

--- In MSG-1@..., Robert Moore <rsmoore@l...> wrote:
David I followed your instructions and removed registry entries,
then re-installed using a freshly downloaded version (not the beta,
_pace_ Arne), re-entered registration key. Entered file location
data, hit Start, got the green light and the yellow but no data,
then it went into 'Note responding' mode again.

Robert
Is the program now holding its settings, if you close it before
pressing the start button?
Yes


From a DOS prompt, can you do a DIR of the location with the
Tellique received files?
Yes


There are some FAQs on the Web which you might want to check....
I'll have a look


Robert


Cheers,
David




Yahoo! Groups Links








------------------------------
Professor Robert Moore
Department of Sociology, Social Policy
and Social Work Studies
The University of Liverpool
Eleanor Rathbone Building
Bedford Street South
Liverpool
L69 7ZA

tel and fax: 44 (0) 1352 714456
Re: reinstalling

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

--- In MSG-1@..., Robert Moore <rsmoore@l...> wrote:
David I followed your instructions and removed registry entries,
then re-installed using a freshly downloaded version (not the beta,
_pace_ Arne), re-entered registration key. Entered file location
data, hit Start, got the green light and the yellow but no data,
then it went into 'Note responding' mode again.

Robert
Is the program now holding its settings, if you close it before
pressing the start button?

From a DOS prompt, can you do a DIR of the location with the
Tellique received files?

There are some FAQs on the Web which you might want to check....

Cheers,
David
Re: reinstalling

Robert Moore
 

David I followed your instructions and removed registry entries, then
re-installed using a freshly downloaded version (not the beta, _pace_ Arne),
re-entered registration key. Entered file location data, hit Start, got the
green light and the yellow but no data, then it went into 'Note responding'
mode again.

Robert




Quoting David Taylor <david-taylor@...>:

--- In MSG-1@..., Robert Moore <rsmoore@l...> wrote:
But MDM is not working; it quickly slips into a 'Program not
responding' mode and even in its earliest minutes before this
happens it is not holding the settings I am entering (file locations
etc)
Any thoughts on this?

Robert
To be honest, no. You are the first person to report that. The
settings are held in the "current user" section of the registry, so
should work whether you are logged in as an Admin or a regular
user. Possibly you may need to be logged in as Admin for the
initial installtion.

Perhaps delete the registry branch:
HKCU&#92;Software&#92;David J Taylor&#92;MsgDataManager

and re-enter everything? Including the licence code.

I think you _must_ get the program to save its settings correctly
before proceeding.

Cheers,
David




Yahoo! Groups Links








------------------------------
Professor Robert Moore
Department of Sociology, Social Policy
and Social Work Studies
The University of Liverpool
Eleanor Rathbone Building
Bedford Street South
Liverpool
L69 7ZA

tel and fax: 44 (0) 1352 714456
Re: reinstalling

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

--- In MSG-1@..., Robert Moore <rsmoore@l...> wrote:
But MDM is not working; it quickly slips into a 'Program not
responding' mode and even in its earliest minutes before this
happens it is not holding the settings I am entering (file locations
etc)
Any thoughts on this?

Robert
To be honest, no. You are the first person to report that. The
settings are held in the "current user" section of the registry, so
should work whether you are logged in as an Admin or a regular
user. Possibly you may need to be logged in as Admin for the
initial installtion.

Perhaps delete the registry branch:
HKCU&#92;Software&#92;David J Taylor&#92;MsgDataManager

and re-enter everything? Including the licence code.

I think you _must_ get the program to save its settings correctly
before proceeding.

Cheers,
David
Re: Meteosat 5 FSD

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

--- In MSG-1@..., "Douglas Deans" <douglas@d...> wrote:
Meteosat 5 FSD has recommenced with the 12.00 UTC.

Regards
Douglas.
Thanks for that report Douglas. I got the 3-hourly 12:00 slot, and
the 12:30 30-minute slot is just coming in, so it looks as if this
is correct (for the tests).

I have a little batch file I run:

----------------------------
FIND "MET5" process.log > log-met5.txt
NOTEPAD log-met5.txt
----------------------------

which shows all Met-5 transactions in the recent log file. It would
show any MTP 30-minute data (being skipped) even if you had the MTP
box unchecked.

Cheers,
David
Meteosat 5 FSD

Douglas Deans <douglas@...>
 

Meteosat 5 FSD has recommenced with the 12.00 UTC.

Regards
Douglas.
Re: reinstalling

a_van_belle
 

--- In MSG-1@..., Robert Moore <rsmoore@l...> wrote:
.....
.... Anyhow I downloaded latest versions of
both programs plus AutoGet. But MDM is not working; it quickly
slips into a
'Program not responding' mode and even in its earliest minutes
before this
happens it is not holding the settings I am entering (file
locations etc)
Any thoughts on this?

Robert
Robert did you install the full version first (about 1.8 Mb,
automatic install) before copying the latest Beta version executable
over it ?

MDM saves settings in the registry so you must have administrator
rights added to your account (W2K and XP).

Hope this helps.

Greetings,
Arne van Belle
reinstalling

Robert Moore
 

David I am just getting going again after having to do a clean reinstall of my
O/S. Not something I every want to do again! I hoped I might be able to save my
GSS and MDM folders so that when I reinstalled the software I would have all my
settings available.
this, it seems, was wishful thinking. Anyhow I downloaded latest versions of
both programs plus AutoGet. But MDM is not working; it quickly slips into a
'Program not responding' mode and even in its earliest minutes before this
happens it is not holding the settings I am entering (file locations etc)
Any thoughts on this?

Robert



------------------------------
Robert Moore
tel and fax: 44 (0) 1352 714456
Re: Met 5 FSD

a_van_belle
 

Also over here no MET5 FSD or MET5 MTP images today (Feb 11)

Did receive and process the 1/2 hourly MTP MET5 data from 1030 to
1530 on Feb 10
But last image 1530 MET5 WV does miss upper segment no 5.

Greetings,
Arne van Belle
Re: Met 5 FSD

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

--- In MSG-1@..., "Douglas Deans" <douglas@d...> wrote:
There is still no Met 5 FSD being received.

Regards
Douglas.
Douglas,

Many thanks for that report. I know that Eumetsat are working on
the problem, and will value your status report.

I am still getting images, so if anyone is desparate I guess it
might be OK for me to send you the 3-hourly data.

Cheers,
David
Re: Using the EKU

seggins2000 <seggins2000@...>
 

Thanks John!
That seems to have worked.
The instructions were a tad obscure.
Best wishes
John

--- In MSG-1@..., "John Willis" <john@l...> wrote:
I must confess I was also a little confused over the instructions.

The procedure that I found works:-

1) If you have put the EKU into your USB port - take it out again!

2) Load the CD Rom into disk drive.

3) Open folder 'EKU_software'

4)Double click 'eTokenRTE.msi'

5) Put your EKU into the USB port

6)Double click 't-systemssetup.exe' in the Tellique folder

7) During the installation a screen appears which asks for your
User name & Password - enter the details EXACTLY as on your email.
(User Key=Password)

8) Complete the installation and you should find that when you
restart your computer everything will be fully working without any
intervention.

9) You will find that nothing reaches your MSG Data Manager. This
because the new version of Tellique is now in Program Files and you
will need to redirect MSG DM.

I hope this helps and if others have found differences then don't
hesitate to point this out.

John Willis - john@l...



----- Original Message -----
From: seggins2000
To: MSG-1@...
Sent: Wednesday, February 11, 2004 5:06 PM
Subject: [MSG-1] Using the EKU


I installed the EKU some time ago. I was emailed a user name and
password.

I must be slow on the uptake but I cannot, for the life of me,
see
what I am supposed to do with the user name and password. I
tried "properties" for the eToken software - I asks for a
password to
rename the eToken. The password I have does not work there. The
token is in its USB slot and its light is on.

I am receiving images without difficulty at the moment but am
concerned about what may happen when the EKU becomes necessary.

In addition, I have noticed 2 instances of tqrecv.exe running
in "processes" in task manager (W2K). One has a PID of 1524 and
the
other has a PID of 1912. Ending either one stops the software.

I would appreciate some advice on this.
John Say




Yahoo! Groups Links
Met 5 FSD

Douglas Deans <douglas@...>
 

There is still no Met 5 FSD being received.

Regards
Douglas.
Re: Using the EKU

John Willis <john@...>
 

I must confess I was also a little confused over the instructions.

The procedure that I found works:-

1) If you have put the EKU into your USB port - take it out again!

2) Load the CD Rom into disk drive.

3) Open folder 'EKU_software'

4)Double click 'eTokenRTE.msi'

5) Put your EKU into the USB port

6)Double click 't-systemssetup.exe' in the Tellique folder

7) During the installation a screen appears which asks for your User name & Password - enter the details EXACTLY as on your email. (User Key=Password)

8) Complete the installation and you should find that when you restart your computer everything will be fully working without any intervention.

9) You will find that nothing reaches your MSG Data Manager. This because the new version of Tellique is now in Program Files and you will need to redirect MSG DM.

I hope this helps and if others have found differences then don't hesitate to point this out.

John Willis - john@...

----- Original Message -----
From: seggins2000
To: MSG-1@...
Sent: Wednesday, February 11, 2004 5:06 PM
Subject: [MSG-1] Using the EKU


I installed the EKU some time ago. I was emailed a user name and
password.

I must be slow on the uptake but I cannot, for the life of me, see
what I am supposed to do with the user name and password. I
tried "properties" for the eToken software - I asks for a password to
rename the eToken. The password I have does not work there. The
token is in its USB slot and its light is on.

I am receiving images without difficulty at the moment but am
concerned about what may happen when the EKU becomes necessary.

In addition, I have noticed 2 instances of tqrecv.exe running
in "processes" in task manager (W2K). One has a PID of 1524 and the
other has a PID of 1912. Ending either one stops the software.

I would appreciate some advice on this.
John Say




Yahoo! Groups Links
Re: Using the EKU

seggins2000 <seggins2000@...>
 

--- In MSG-1@..., "David Taylor" <david-taylor@b...>
wrote:
--- In MSG-1@..., "seggins2000" <seggins2000@y...>
wrote:
[]
In addition, I have noticed 2 instances of tqrecv.exe running
in "processes" in task manager (W2K). One has a PID of 1524 and the
other has a PID of 1912. Ending either one stops the software.

I would appreciate some advice on this.
John Say
John,

That is normal. There is a main reception process and a watchdog
process to detect and handle error conditions. Under some error
conditions you can get multiple T icons in the taskbar, which go
away when the mouse cursor is moved over them.

I haven't done a recent eToken installation with the released
software, so someone else may be able to help.

Cheers,
David
Thanks David
Best wishes
John
Re: Using the EKU

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

--- In MSG-1@..., "seggins2000" <seggins2000@y...> wrote:
[]
In addition, I have noticed 2 instances of tqrecv.exe running
in "processes" in task manager (W2K). One has a PID of 1524 and the
other has a PID of 1912. Ending either one stops the software.

I would appreciate some advice on this.
John Say
John,

That is normal. There is a main reception process and a watchdog
process to detect and handle error conditions. Under some error
conditions you can get multiple T icons in the taskbar, which go
away when the mouse cursor is moved over them.

I haven't done a recent eToken installation with the released
software, so someone else may be able to help.

Cheers,
David
32941 - 32960 of 34721