Date   

Re: EUMETCast new Channels and PID lists.

geojohnt@...
 

Hello Nigel,

Long time no hear.
I hope you are well.

The new pages are very comprehensive and useful.

>Regards and happy 2021 - got to better than 2020 !!

Er, without wishing to be political, that depends on whether you are/were a Brexiteer or a Remainer.
And Corona-wise whether you are young or old.

I am both the latter.

Best wishes,
John.

+++++++++++++++

-----Original Message-----
From: nigel <nigel@...>
To: MSG-1@groups.io
Sent: Thu, 31 Dec 2020 15:06
Subject: Re: [MSG-1] EUMETCast new Channels and PID lists.

Thanks for that link, John. Glad you found it - I couldn't a few days ago !!
Regards and happy 2021 - got to better than 2020 !!
Nigel

On 28/12/2020 16:27, geojohnt via groups.io wrote:
All,

EUMETSAT updated their website recently and here is the link to the new Channels and PID lists.


Regards,
John Tellick.



Re: Bas & HVS-1 receptions

geojohnt@...
 

Enzo,

The answer is yes and David's suggested document, which is very comprehensive, contains all you need to know.

One thing I would add is that both BS and HVS-1 are streamed via the same transponder - hence you can use one receiver.
But, you need the 'new' version of the Tellicast software client which deals with BS and HVS-1 data separately.
And you need to have applied for reception of HVS-1.

Regards,
John.

+++++++++++++++++++++++++

-----Original Message-----
From: David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺 via groups.io <david-taylor@...>
To: MSG-1@groups.io
Sent: Thu, 31 Dec 2020 17:06
Subject: Re: [MSG-1] Bas & HVS-1 receptions

On 31/12/2020 16:06, Vincenzo Mone wrote:
> Hello All,
> Please I would like to know if it is possible to receive both BAS and HVS-1
> at the same time using only one SR.
> I am currently only getting the BAS. Please if it is possible what I need to
> receive also the HVS-1????
> Any help will be really appreciated
>
>
> 73’s de Enzo IK8OZV

Enzo - RTFM!

See:


ftp://ftp.eumetsat.int/pub/OPS/out/user/EUMETCast_Support/EUMETCast_Licence_cd/Windows/DVB_devices/Ayecka_SR1_DVB_Receiver_EUMETCast_Setup_Guide_v4A.pdf

Section: 4.5.2

David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: Configuration via other port instead of USB

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 01/01/2021 14:24, Hugo wrote:
Vincenzo,
In the "Ayecka SR1 DVB Receiver EUMETCast Setup Guide" you can find additional information that could be useful.
grts,
Hugo
I pointed Enzo to that guide with a URL in a mail not a day or two ago. Did you read that, Enzo?

--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: Configuration via other port instead of USB

Hugo
 

A good explanation of the difference between a router and a switch see :
https://www.youtube.com/watch?v=O5jAQwAN8mo 

grts,

Hugo


Re: Configuration via other port instead of USB

Hugo
 

Vincenzo,

You can't use a splitter of course ! But you can install a switch or a second router in your shack. This allows you to connect for example several PC's to the same network.
A switch is the cheapest solution.

Hugo


Re: Configuration via other port instead of USB

Vincenzo Mone
 

Hugo,

unfortunately I have the router far from the shack and in the shack

I have just one plug that comes from the router and it is plugged

Into the PC Lan to do internet.

Is there a possibility using maybe a splitter or something that allow me

To plug also the SR1????

Thanks

 

73’s de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520





      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di Hugo
Inviato: venerdì 1 gennaio 2021 15:50
A: MSG-1@groups.io
Oggetto: Re: [MSG-1] Configuration via other port instead of USB

 

No Vincenzo, you can't directly connect the SR1 to the LAN connector of your PC.
You need to connect your SR1 to a router ( for example a combination of internet modem and router).
So look for your internet modem and connect the SR1 to a free RJ45 connector of your router.
The LAN address of your modem is something like 192.168.1.1, Open a browser and connect to your modem.
It will probably ask for a user and a password and somewhere in the menu's of your specific modem you will find a new connected IP address.
This is something you have to find yourself because there millions different routers ....
Once you find the IP address of your SR1 you can ping it , just to see if the connection works.
For example > ping 192.168.1.10 . 
If this works than starting a telnet session for this address is easy....
Hope this helps,

Hugo


Re: Configuration via other port instead of USB

Hugo
 

No Vincenzo, you can't directly connect the SR1 to the LAN connector of your PC.
You need to connect your SR1 to a router ( for example a combination of internet modem and router).
So look for your internet modem and connect the SR1 to a free RJ45 connector of your router.
The LAN address of your modem is something like 192.168.1.1, Open a browser and connect to your modem.
It will probably ask for a user and a password and somewhere in the menu's of your specific modem you will find a new connected IP address.
This is something you have to find yourself because there millions different routers ....
Once you find the IP address of your SR1 you can ping it , just to see if the connection works.
For example > ping 192.168.1.10 . 
If this works than starting a telnet session for this address is easy....
Hope this helps,

Hugo


Re: Configuration via other port instead of USB

Vincenzo Mone
 

Hugo,

Apologise but maybe I am doing something wrong.

I have paced a new LAN card into the PC and

Have connected the Management Port of the SR to the new LAN port.

Is it correct?

Which are the next steps please as in the manual at the 6 - SR1 Configuration and management,

I just read:

 

 

6.2  Telnet Interface

The SR1 provides a Telnet over IP interface. The Telnet is use to interface with the terminal based UI.

Telnet session is taking over the control form the serial interface. To regain control to the serial interface (and drop the telnet session) press ‘x’ on the serial interface.

SR1 is limited to a single Telnet session

 

 

Please will you be so kind to help me in the correct way?

Thanks in advance

 

 

73’s de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520





      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di Hugo
Inviato: venerdì 1 gennaio 2021 15:06
A: MSG-1@groups.io
Oggetto: Re: [MSG-1] Configuration via other port instead of USB

 

Vincenzo,

Look for 6 - SR1 Configuration and management, but the explanation is rather short.
What you basically have to do is :
- first establish the IP address of your SR1. You can find out which IP address are allocated in your router.
- connect with the Putty program to that IP address and push the enter key.
The setup menu of the SR1 will appear.

grts,

Hugo


Re: Configuration via other port instead of USB

Hugo
 

Vincenzo,

In the "Ayecka SR1 DVB Receiver EUMETCast Setup Guide" you can find additional information that could be useful.

grts,

Hugo


Re: Configuration via other port instead of USB

Hugo
 

Vincenzo,

Look for 6 - SR1 Configuration and management, but the explanation is rather short.
What you basically have to do is :
- first establish the IP address of your SR1. You can find out which IP address are allocated in your router.
- connect with the Putty program to that IP address and push the enter key.
The setup menu of the SR1 will appear.

grts,

Hugo


Re: Configuration via other port instead of USB

Vincenzo Mone
 

Hi Hugo,

Thanks  for coming back.

Please can  you tell me where can I find the SR1 Manual and on which page is

Explained the connection via LAN?

Thanks a lot

HNY

 

73’s de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520





      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 

Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di Hugo
Inviato: venerdì 1 gennaio 2021 12:47
A: MSG-1@groups.io
Oggetto: Re: [MSG-1] Configuration via other port instead of USB

 

Vincenzo,

It is perfectly possible to access the configuration via the LAN , and you still need the PUTTY software or any other Telnet software.The procedure is (rather short) explained in the SR1 manual .
grts,

Hugo


Re: Configuration via other port instead of USB

James Brown
 

And if you have the SR1 control software it has telnet built in. Click on the Einstein icon on the right  There you will find a telnet option. It’s been around for over 6 years but still works for me. 

PS. Is it definitely the SR1 USB port and not the one on your computer?

Cheers

James

On 1 Jan 2021, at 11:47, Hugo <hvanruys@...> wrote:

Vincenzo,

It is perfectly possible to access the configuration via the LAN , and you still need the PUTTY software or any other Telnet software.The procedure is (rather short) explained in the SR1 manual .
grts,

Hugo


Re: Configuration via other port instead of USB

Hugo
 

Vincenzo,

It is perfectly possible to access the configuration via the LAN , and you still need the PUTTY software or any other Telnet software.The procedure is (rather short) explained in the SR1 manual .
grts,

Hugo


Configuration via other port instead of USB

Vincenzo Mone
 

Hi Folks,
Happy new Year
As I have the USB Port broken on my AYECKA I would like to know
If it is possible to access to the configurations in other way like
The Lan port. If yes please which is the procedure and do I still need the
PUTTY software
Or need other?
Thanks
HNY to all

73’s de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************
      ******  GSM  +39 328 7110193  ******
      *****  SMS  +39 328 7110193   *****
      *********************************


Where to repair Ayecka

Vincenzo Mone
 

Hi folks,
Happy new year.
This year for me is terminated badly.
Unfortunately I have the Aycka SR1 gone.
Today I went to plug in the USB cable to configure it for HVS-1
and the USB connector went off.
I have tried to fix it but maybe I have damage it.
Is it possible to send it to repair or I have to buy a new one?
Please if there is a support where can I send, which it is?
If I need to by a new one where to buy it?
Thanks



73’s de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




      *********************************
      ******  GSM  +39 328 7110193  ******
      *****  SMS  +39 328 7110193   *****
      *********************************


Re: Bas & HVS-1 receptions

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 31/12/2020 16:06, Vincenzo Mone wrote:
Hello All,
Please I would like to know if it is possible to receive both BAS and HVS-1
at the same time using only one SR.
I am currently only getting the BAS. Please if it is possible what I need to
receive also the HVS-1????
Any help will be really appreciated
73’s de Enzo IK8OZV
Enzo - RTFM!

See:


ftp://ftp.eumetsat.int/pub/OPS/out/user/EUMETCast_Support/EUMETCast_Licence_cd/Windows/DVB_devices/Ayecka_SR1_DVB_Receiver_EUMETCast_Setup_Guide_v4A.pdf

Section: 4.5.2

David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: Eumetcastview Usa passes

Ernst Lobsiger
 

On Thu, Dec 31, 2020 at 08:30 AM, Daniele Guardigli wrote:
What about Metop?
Daniele,

no idea what you have as EUMETCast receiver.

Metop-A is on HVS-1 Channel E1H-EPS-10
Metop-B/C on Basic Service Channel  EPS-10

Cheers,
Ernst


Re: Eumetcastview Usa passes

Daniele Guardigli
 

Thanks, I missed this info. What about Metop?


Il giorno gio 31 dic 2020 alle ore 17:23 Ernst Lobsiger via groups.io <ernst.lobsiger=belponline.ch@groups.io> ha scritto:
Daniele,

NOAA20, Suomi_NPP, FY-3D have only EARS coverage.

https://www.eumetsat.int/EARS-regional-data-service

You only get Metop-A/B/C and Sentinel-3A/B worldwide.

(...maybe some older NOAA AVHRR in EUMETCastView)

Ernst



--
Daniele Guardigli


Re: Eumetcastview Usa passes

Ernst Lobsiger
 

Daniele,

NOAA20, Suomi_NPP, FY-3D have only EARS coverage.

https://www.eumetsat.int/EARS-regional-data-service

You only get Metop-A/B/C and Sentinel-3A/B worldwide.

(...maybe some older NOAA AVHRR in EUMETCastView)

Ernst


Re: Eumetcastview Usa passes

Daniele Guardigli
 

Thanks Hugo,

I did it but I'm not able to see Noaa20 or Sumi-NPP passes over the Americas. Same for Metop except that I can only see all passes for Metop A/B/C (not HRP, the left tab).

Il Gio 31 Dic 2020, 16:52 Hugo <hvanruys@...> ha scritto:
Hi Daniele,

If you push the button "Show All Segments" you should be able to see all the segments that you received.
If the button "Show All Segments" is NOT selected than you can drag the right scroll bar until you see the segments appear on the 3D Globe.

grts,

Hugo

2481 - 2500 of 33126