Hi Vincenzo, I am using a similar setup as you with the second network card (actually a USB3 - Gigabit Ethernet module) on the receive PC connected to the SR1 Traffic port and a USB2 cable connected

For the Basic Service you need MODCOD 8PSK3/5 and for HVS-1 (or HVS-2 on TP2) you need MODCOD 16APSK2/3 Don't know what TBS Card you have but page 15 of the following document should

Hello Ernst, Please can I have your PM???? I am tyring with a ernst.lobsiger@... But I get relay access denied. Thanks 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet

Richard, Some versions back the *name* of the relevant variable was changed from PPP_CONFIG_DIR to SATPY_CONFIG_PATH. That's all. Before starting a script in the black window this variable must be

Hello to the Group. I recently installed Pytroll/Satpy on Windows 10 following the instructions given in SatPy_HOWTO_V30.txt kindly provided in this forum. The Satpy version is 0.29. Everything

On Eumetcast I recently subscribed to Metop, SNPP and NOAA Global Data Services / GDS-SNPP/NOAA-20 - VIIRS EDR Regional Data Services / RDS-EARS - EARS-VIIRS The Global data Services arrived on the

You need to ask the person who manages your network, or seek advise from someone with networking knowledge. I cannot guess what IP numbers might be free, or which are allocated to DHCP in your

Hello all, It is a couple of days that I am trying to get but without success the HVS-1 signal. I do not think it is something to do with firewall or antivirus as I get without problems the BAS signal

Hello David, unfortunately it did not work. I have set as you said in the example but no luck. The problem to me are the various IP address that I cannot understand which one to put. When you

Grazieeeeeeeeee-- Osservatorio Meteo e Sismico 17° A.N.Carabinieri UMBRIA www.OsservatorioMeteoeSismicoPerugia.it Dir.Marco Martini Tel.393/6939199

Marco, Add it alongside the .EXE file, just like in your working

Peter, On the EUMETSAT Web site: https://eumetsatspace.atlassian.net/wiki/spaces/DSEC/pages/700055570/Channels+and+Packet+Identifiers+PIDs Cheers, David -- SatSignal Software - Quality software

HVS-1 announcement channel is wrong, should be: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [announcement_channel] address=224.223.223.223:4711 name=TSL-HVS-1 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ For the network

Jonathan I already had a SR1 set up for HVS-1 and BAS and then i decided much later to require HVS-2 so i then purchased the TBS card for this. I do not use RAMdisk, but i have an extra large SSD

Thanks both. With Ernst’s heads up about the 6903 being able to take all 3 services, I was going to ask you Philip why you went for two receivers. Whilst I’m here, can I ask you both … I

Hi I think they are on HVS-1 J

Hello Does anyone know which Modes Codes to select for the TBS data services for EUmetSat? On the instruction manual it says to select two. But I contacted EUmetsat when I was having problems with

Hello all, the EUMETCastview software handles NOAA-20 VIIRS but can someone tell me are these BAS, HVS-1 or HVS-2 transmissions and also which channel they appear on? Regards, Peter

Ernst Thanks for that. I will bear that in mind if i start getting problems with my setup. But as its working perfectly at the moment receiving all the data, i will use the famed words." If it ain,t

Philip, an even better setup in your case would be to receive a "rain proof" BAS only (setting a MODCOD filter) with your SR1 and HVS-1 + HVS-2 over a single cable to the TBS-6903. This takes some