All, I commented the other day about (possibly?) seeing more Dummy PLFrames being transmitted 'recently.' Well, this is the case and I've received this explanation from Ops as to what they are: Your

Ernst, thank you for your reply. Using BDAdataEx the Modcod box is set to 'All', so I assumed it covers everything in the same way as it does PIDs. The two TC ini

Terence, this looks like you have no useful input to your HVS-1 client. These are the points I would check: - Is the SNR high enough for HVS-1 (16apsk 2/3 needs 12dB +) - Is there a MODCOD setting for

Good day all, perhaps someone far better informed than I would be kind enough to put me on the straight and narrow. Having recently replaced my dead SR1 with a TBS 5927 after

Thanks Ian for the reminder 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520

Just a reminder that RSS stops tomorrow for almost a month ( starts up again 7/12/21 ) with no gap filling being provided. Regards Ian.

Ernst, I feel that sticking with the EUMETSAT convention may make for fewer trouble-shooting calls in the future. Perhaps a sub-directory "HVS-1" might stand out more than E1H. I can see

David and John, while taking 2 x (T1 + T2) with a TBS6909X and 6 clients I *had* to use /srv/rec_0/Channel_Name ... /srv/rec_5/Channel_name. rec_0 for Basic , rec_1 for hvs-1, rec_2 for hvs_2 etc. But

David, Thanks for your suggestion on to be aware to buy it on that site. I really appreciate your suggestion. Take care 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet

Enzo, The TBS5927 should receive HVS-2. That price is far too low, I would not buy there. As I already explained TER is for direct distribution over the Internet to special users, and not via

David, Thanks for your configuration clarification. Good to know that I am (somehow) following EUMETSAT configuration settings. (:-)) Regards, John. +++++++++++++++ John, In this case it doesn't

Hello All, Please apologise if using this forum for an help. I have found this site that sales the TBS5927 USB Box, but before I make a wrong Purchase I would like to know if the one is OK for our

Hello Enzo, Cheers, Thorsten

Thorsten, it seems I had success to access to my profile and I have this: Thanks 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint

Hello Thorsten, First thanks for your reply. Please I want to check if I have already requested it but Do not remember how. I have been on the EO portal site logged in with my credentials but

John, In this case it doesn't matter - except for conformity with the EUMETSAT recommendations. If E1H-TPG-1 is used just for the GOES-16 ABI data, providing that the directory set in the receiving

Hello Enzo, have you already ordered the GOES-16 and GOES-17 data from the EO-Portal? Cheers Thorsten

Enzo, Your cast-client-channels_hvs-1 configuration seems to be wrong. It should be something like: [channel] name=E1H-TPG-1

Hello Enzo, To save David's sanity, the first thing you need to do is to start again just posting on the msg-1 group and change the subject name to GOESS 16 and GOES 17 and Himawari. Meteosat 5 died

Hello all, Please anybody can help me on my issue? I cannot receive the Goes-16 and Goes-17 despite having set: [channel] name=E1H-TPG-1 target_directory=\EUMETCast\received\E1H-TPG-1\ in