[] Thanks for that, Ernst. I can get the list of interrupt sources but not their associations. My system has only 4 cores, and my feeling is that if I dedicate two cores exclusively to the two TAP

David, under GNU/Linux you have both and these are independant choices. You can tell a process to run on one core. This can e.g. be the HVS-2 client. Maybe under Windows this could also be

Ernst, Many thanks for that. Unfortunately the program is from 2007 and hasn't been updated. When running it you get the device list, but not the interrupt mask - "the registry value is an

Many thanks for that, CrazyCat. I hope to test this, but I need to ask Ernst a question first. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email:

Hi David, I make test build BDADataEx 1.4.12 with Affinity option http://crazycat69.narod.ru/sattelite/DVBDataEx/test/BDADataEx.rar

David, here is a tool for interrupt affinity under Windows https://www.techpowerup.com/download/microsoft-interrupt-affinity-tool/ use it at your own risk and peril :-). Cheers, Ernst

Ernst, the NOVRA receiver provide no link margin values. So I have defined my own values: For BAS I subtract 6.7 from SNR. For HVS I subtract 10.5 from SNR. I observed, that error free reception above

Thanks for your comments, Ernst, and apologise for need them to be repeated! Windows has processor affinity, yes, but I don't know about interrupt affinity. On my particular system there are 4 cores.

Yes, empirical, but good enough to compare across the same devices. My guess is that the passband shape will come into it, and how that affects both the noise distribution across the passband, and

Daniele, remember that it is of no use to have very big numbers of pixels. Only the aspect ratio of area-extent and image shape must match. The example I started with has 1000 pixels for 300 km.This

Thank you Ernst, it works! Now let's play with areas! -- Daniele Guardigli

Daniele, In your personal ...EMCtools/pppconfig/areas.yaml copy any whole area definition on top and edit it as the example below: cyprus:

Good morning, I'm trying to understand Satpy scripts included in StarterKit but I can't understand how to create a custom area (like Italy) since coordinates are not in lat/long format. Is there a doc

David, yes the LM of HVS is normally the problem. With a reasonably sized antenna BAS almost always has a considerable LM. Of course the constants I use are only "empirical" as far as I have found

David, I think it's not a demod problem but a PCIe bridge problem. As I said in a post before this ECP3 chip (common to all TBS PCIe cards issued after the TBS6983 Arne uses) has 8 "channels" with

Ernst, On my system I see: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ C:\Users\David>powercfg /a The following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep

Ernst, Using the SNR also has the advantage of simplifying the MRTG, not needing to run a Perl script. Almost! For an HVS-1 or HVS-2 measurement the script below works well - sorry about the wrap

Hi Short before launch Eumetsat recognized a problem with the satellite and therefore launched the already assembled second satellite in the row M02 formerly planned as Metop-B now became

David and Arne, my problem explained in the last post could be caused by the NIC going in some sleep state. It's a PCIe device like the TBS6903. Then the connection to SAMBA would not work and even

David, I understand you solved your problem by not letting the system turn off the screen. I had a very similar issue here: I scheduled the Windows PC to make an RSS frame of the UK every 5 minutes