it's a usb device. That's tiresome. I've just added a USB wireless network card, and that does allow its address to be set - "but it would, wouldn't it?". As I recall, Lawrence Harris, Ap van

It won't let me, David. It's all greyed out - I assume because it's a usb device. Is there anyone out there with the same XP / usb setup as me ? ~Chris

[] interface address Sounds like the IP address is wrong. Control Panel (perhaps), Network Connections, B2C2 card, right-click properties, TCP/IP protocol, properties, set the IP address to:

upgrade to Win2k or even NT4 ? ;-}

The log says : MSG:2004-02-28 14:50:47.632:tqrecv.exe running [620]. ERR:2004-02-28 14:50:51.057:Failed to open announcement channel `TSL Announcement Channel', address 224.223.222.223:4711 (wrong

You can install the files wherever you want and call the folders what you want. A good scheme is to keep the C partition for the system and install applications on the D partition and so on. That way

--- In MSG-1@..., "Chris Cadogan" <chris@c...> wrote: [] > What's XP for "winipcfg" ? Get a command prompt: ipconfig ipconfig /all Cheers, David

Thanks Peter. I'm on Day 1 of the XP learning curves, bear with me please. The receiver is a USB, the B2C2 Broadband Receiver is seen as a Local Area Connection, but Address Type, IP Address etc are

Chris, Check the B2C2 IP address it should be 192.238.238.238. Peter

Hello all, I've just installed the Technisat and Tellique software + EKU onto a brand new Windows XP Home machine. The receiver is a Sky2PC usb. It was all working fine, I have several hundred

wrote: have now observed that I have large quantities of files noaa15,17 and 17 with the extension .bz2 and .bufr and many MPEF GII. What are these files? Alan, The NOAA files are ATOVS data. By

Hi folks, I confess to not having kept up with the group recently and have now observed that I have large quantities of files noaa15,17 and 17 with the extension .bz2 and .bufr and many MPEF GII.

Luca, Last one was L-000-MSG1 -GTS - -000073 -200402270646- One or two come in each day. John wrote: wrote: (GTS) EUMETCast Offices,

John, can you please confirm that you are receiving MDD data from EUMETCast at this time? I know that David is receving it, but he is an official beta tester for EUMETSAT; MDD should only be

--- In MSG-1@..., "Douglas Deans" <douglas@d...> wrote: [] > Yes indeed and if you are running a network, ie 2 computer set-up, I found that the new file arrangement where the T-System

You all probably know this already, but on the basis that, if I don't say anything, some folk might miss out... Digital Atmosphere will load, plot and display the data in MDD(GTS) as we are

Hi Thanks, something else for me to look out for when I try to get up and running Trevor