Hi Giuseppe, 2GB ram should be more than enough to receive and decode all data on a single PC. Currently I still run receive and decode on a 1 Ghz P3 with only 512 Mb ram. 25 Mb is used for Ramdisk

Douglas, Thanks for the information from EUMETSAT regarding high levels od pollen in the atmosphere. I guess that is what has been causing the milky haze in the southern North Sea over the last

Lawrence, Was at the computer late afternoon and watched them develop quite quickly out of the window to my west before moving off down the M4. Look at the long shadows of a line of tall thunder

If cost is not a matter look at iRAM - SerialATA "disk" made of RAM modules.: http://tw2005.giga-byte.com/Peripherals/Products/Products_GC-RAMDISK%20(Rev% 201.3).htm (beaware of splited lines in

Ulrich G. Kliegis wrote: Ulrich, Please see the FAQ. The MSG Animator questions 6 and 13 refer to this issue. http://www.david-taylor.myby.co.uk/software/faq.htm By the way: this question would

Hello, still in the advanced setup phase, I rearranged some directories on my receiving PC. In that, drive F: was integrated into E: , now forming a larger E: Now, when I installed (i.e. let it run

Arne, I know about limited life, and really CF is only a temporary, experimental, solution; I think to use a microdrive that should be more effective even slower than a traditional HD. Down link is

In message <008b01c6739b$996f2140$6501a8c0@grahamd7xxbs3y>, Graham <gwhitehead@...> writes Perhaps they will persist until Thursday which is the 125th anniversary of Theodore von

Hi Giuseppe, Do you use compact flash to do repetitive writes ? Be aware that compact flash uses ram which has a limited number of write cycles ! Flash ram is very slow in writing compared to a

I have made an animation of the vortex effect in the Canary islands today. Can anyone tell me what the horizontal line is that starts at 07.00 and sweeps west across the islands wiping out the clouds

Hi all, in past few days I changed my PC configuration, starting with my "2006-Xmas" one. All is working, and I want to share my experience. Initial configuration was: ABIT KV-85 MB AMD Sempron

Not sure if this has been seen before but there are some new artefacts on the far edges of the Eastern (And Western) areas of the HRV northern section this morning. They'll probably disappear soon but

Thanks for the answer. Good idea with the text. Mario Robert Moore schrieb: -- ---------------------------------------------------------------------- Mario Rindlisbacher email:

Mario there's nothing wrong with your image. There isn't any MSG-1 imagery to be cut out of the top left corner - the Bracknell chart wraps over the satellite horizon at this point. So we all have the

Mario Rindlisbacher wrote: Answered in the SatSignal group. Cheers, David -- SatSignal software - quality software written to your requirements Web: http://www.satsignal.net Email:

Hello, I tried the Bracknel overlay option in Geosatsignal and I have the problem, that the upper-left part of the image (northern canada/greenland)) only shows the overlay, but the MSG image is cut.

Please be aware that the driver version supplied with new Skystars is not the prefered version (currently 4.40 ?) Eumetsat recommends driver version 4.30, newer versions have not been fully tested

Hi everybody. I am new here and try to setup the EUMETCAST system. I applied for the USB token and the software which might come in a few days. I bought a 1m dish and pointed at hotbird, I do

In message <qgk2hgB9WwXEFwUS@...>, James Brown <satellite@...> writes And its fixed - thanks to our engineers! Cheers James -- James Brown

... but google hearth is not real-time-updated... they're very kind and lovely... Ciao Giuseppe