Folks, it seems that (possibly following a security update this morning) I can no longer use the Reply function in the Web interface to the Yahoo groups. If anyone else has the same problem - e-mail

Ian, At least you had a bit of the country to see. I have moved from the Alps to the middle of the North Atlantic! Curse this messing around with the HRV. Alan

I wonder what your thoughts are on this announcement David? Advanced Warning - Week 44 On 28 or 29 October 2003 (day 03.301 or 03.302) it is planned to start the dissemination of the IMPF level 1.5

James, Wales missing I can deal with -- but certainly not Scotland !! Certainly made a mess of the UK animation. Ian

In message <000801c393c0$3c909ca0$0100a8c0@douglas>, Douglas Deans <douglas@...> writes Yes indeed Douglas, bye-bye Wales! James -- James Brown

For those new to MSG the out of position 24th segment on the 08.00 UTC scan is probably a prelude to a northern section scan change on the HRV channel. The 08.30 may be changed. Douglas.

Just to clear up any misunderstanding the missing segments in the 17.00 and 17.15 UTC scan were due to a Hotbird transponder failure not Eumetsat. The problem lasted about 10/15 mins as I previously

I just checked signal level of my DVB and it 60%, as usual. I live near Milan and my dish diameter is 60cm, transparent plastic esternally. I can not say anything else, since I just sent my request

Douglas, I've just switched on my rx PC and data seems to be flowing OK here Dave (Isle of Man)

Back on but from experience you may need to re-boot in the correct sequence if segment loss is to be avoided. The outage was about 10 mins with some questionable in/outs just prior to that. Douglas.

Unless some unexpected has happened at this end it looks as if the 11096 transponder is down. Red icon on the taskbar for the DVB but only on that frequency and TV channels on that transponder also

Hi MSG'rs have segments 2 4 5 6 7 8 are missing, segment 3 has the first few lines missing and the 0830 cycle is missing . HRV all except 1 and 2 missing. > Looks very similar

jkelly@... writes: Jeff, Someone in EUMETSAT has successfully used the TechniSat SkyStar 2 PCI (see Timestep advertisement in the September RIG Journal) to receive the C-Band

have segments 2 4 5 6 7 8 are missing, segment 3 has the first few lines missing and the 0830 cycle is missing . HRV all except 1 and 2 missing. > Looks very similar here..... The Tellique log

David, I have this but on the 0815 cycle where all HRIT/LRIT channels have segments 2 4 5 6 7 8 are missing, segment 3 has the first few lines missing and the 0830 cycle is missing . HRV all except

wrote: MSG than David, this is the expected behaviour from the current version. It was processing the 0815 cycle, data for which stopped in the middle of the scan. When data for the 0830 cycle

David, My collection computer has been running since late Friday 10 October. The computer that runs MSG Data Manager was turned on yesterday ( It is used for other jobs with occassional bursts

Oh, well, that's right up-to-date! I'm adding more protection to the program against bad segment data which the Tellique software sometimes seems to emit, so perhaps it may not happen in a future

v.1.2.4.236 Signals restarted 20:00 last night here. John