Enzo I also have found no problems using BDADataEx for HVS-2. Windows10 Philip

Enzo, I found the TBS software unreliable on a couple of PCs I tested, and I now use CrazyCat's BDADataEx instead. Works as expected. David -- SatSignal Software - Quality software for you Web:

Enzo, I've just replied in an email to you, and as your configuration settings for TPS-IPdata and HVS-2 tellicast seem to be correct, I can only suggest a USB connection issue and the TBS-IPdata

Hello everybody, Please is there anybody using the TBS 5927 with the TBS Data Devices Program? I have bought the TBS-5927 to use to receive the only HVS-2 data but I am encountering a

Manu, AFAIK this is Metop Ozone distribution data https://www-cdn.eumetsat.int/files/2020-04/pdf_metop_c_gome2_pvr.pdf that you are almost certainly not interested in. Regards, Ernst Am

Hello to all Beginner's question but I receive many files in the EPS-5 directory in GOME_xxx_1B_M01 format. Can you tell me what they correspond to? With which software can I process them? Manu

That looks most impressive Christian. Thanks to Ernst too for taking the time developing all these extra features for Satpy/Pytroll. Barra was quite blowy Ernst, but I tightened the clamps on my big

Ernst and all, another Overlay made with Pytroll/Satpy and with nice overlay code form Ernst: It’s the IR_108 inverted channel, masked with NWC-CT data on top of blue marble background with an DWD

Enzo, I've replied to your personal email, and until you get the TBS-IPdata data program running without it shutting down after a few seconds, don't try getting Tellicast to work. I've suggested

Hello All, It is several day that I am trying to receive the HVS-2 data with A TBS-5927 without success. I am noticing two issues that I cannot get solved. The first is that every time I run the

Andreas, Oase is the nickname for our home and garden (which is more like a jungle). The area oaserss is just puts our Oase in the center of the image and is good for Meteosat-10 RSS. It's easy to do

@Ernst, did now play with the webm format based on your infos in combination with PyTROLL and it works like a charm. While checking some of your sample files a found one named

Hi Enzo Sorry to mislead you. I have the tbs 6903 pciecard not the TBS 5927 USB but i think the same still applies. You should be on 11387.50 to receive HVS-2. regards Philip

For HVS-2 you need to follow the instructions for Transponder T2 on the Eumetcast Instructions pdf. Transponder freq 11388MHz, Vertical polarity. On the IP Over DVB tab you only need to add PID 610 as

Hi I am not an expert in all this so if the advice I give is wrong please someone say so. I have a TBS 5927 pci card and receive HVS-2 and all the satellite data I require through CrazyCats

Thanks to CrazyCat and to Philip, i have still some problem. I want to use this Unit just to receive the HVS-2 Signal but i am a bit confused on the settings. My first question is which are the

On Tue, Dec 7, 2021 at 03:32 PM, Vincenzo Mone wrote: Code: 0 Code Type: Root Code and pressed on Set but I get just the signal Strength to 70 while the Quality is 0. Try root 1 or gold 0

Graham and All, here is the solution for this litte exercise: easy: description: NOAA radiofax forcast chart showing wind and wave height in the western atlantic projection: proj: merc

Hi Everyone, It seems I got the HVS-2 signal. How you can seefrom the attached picture, I got both signal and quality, but When I run the EumetCast HVS-2 batch file, I get the yellow icon and

Hi Try using frequency 11387.50 Philip