|
Re: SR1 receiver with USB fault : question about lan config
Sorry for my poor english.Afther long time I re-switch on my satellite PC and I see a little problem : USB to Serial adapter of ayeka is fault : unknow device...
I've tryed to access via telnet using
Sorry for my poor english.Afther long time I re-switch on my satellite PC and I see a little problem : USB to Serial adapter of ayeka is fault : unknow device...
I've tryed to access via telnet using
|
By
David J Taylor
·
#28417
·
|
|
Re: SR1 receiver with USB fault : question about lan config
Ciao David, thank's so much for you words about my "english" !!! ;)
Ok for managment port usage: my sr1 is already configured, I must only monitor the status.
However, today, I've found the fault:
Ciao David, thank's so much for you words about my "english" !!! ;)
Ok for managment port usage: my sr1 is already configured, I must only monitor the status.
However, today, I've found the fault:
|
By
Mario Brustia
·
#28418
·
|
|
Oh My Goodness - recovered HDD space!
All,
I was 'looking around' my EUMETCast computer yesterday and found my Data Disk (E:) was rather full.
I had far less free space than - I thought - I had a 'few months ago.'
I had only 413 GB from a
All,
I was 'looking around' my EUMETCast computer yesterday and found my Data Disk (E:) was rather full.
I had far less free space than - I thought - I had a 'few months ago.'
I had only 413 GB from a
|
By
geojohnt@...
·
#28419
·
|
|
FY2H
The FY2H data is now coming in along with FY2G.
Data Manager is processing the MET. data from FY2H which is being saved correctly in the CMA folder, but image data is remaining in Data Channel 12
The FY2H data is now coming in along with FY2G.
Data Manager is processing the MET. data from FY2H which is being saved correctly in the CMA folder, but image data is remaining in Data Channel 12
|
By
Ian Deans
·
#28420
·
|
|
Re: FY2H
Hi,
The NASA's Panoply software is capable of displaying FY2H image data in a form of y and x axis but its not possible to include boundary data.
Best regards
Hi,
The NASA's Panoply software is capable of displaying FY2H image data in a form of y and x axis but its not possible to include boundary data.
Best regards
|
By
Hamdan
·
#28421
·
|
|
Re: FY2H
The FY2H data is now coming in along with FY2G.
Data Manager is processing the MET. data from FY2H which is being saved
correctly in the CMA folder, but image data is remaining in Data Channel
12
The FY2H data is now coming in along with FY2G.
Data Manager is processing the MET. data from FY2H which is being saved
correctly in the CMA folder, but image data is remaining in Data Channel
12
|
By
David J Taylor
·
#28422
·
|
|
Re: FY2H
=====================================================================
Thanks David. I have one or two "0ff-topic" issues myself at the moment causing me misery !!!
Regards
Ian.
=====================================================================
Thanks David. I have one or two "0ff-topic" issues myself at the moment causing me misery !!!
Regards
Ian.
|
By
Ian Deans
·
#28423
·
|
|
Re: FY2H
Thanks David. I have one or two "0ff-topic" issues myself at the moment
causing me misery !!!
Regards
Ian.
================================
Ian, yes, I can appreciate that, but the good news is that
Thanks David. I have one or two "0ff-topic" issues myself at the moment
causing me misery !!!
Regards
Ian.
================================
Ian, yes, I can appreciate that, but the good news is that
|
By
David J Taylor
·
#28424
·
|
|
Re: FY2H
======================================================================
Many thanks David for your fast update. All working well.
Regards
Ian.
======================================================================
Many thanks David for your fast update. All working well.
Regards
Ian.
|
By
Ian Deans
·
#28425
·
|
|
Re: Oh My Goodness - recovered HDD space!
John,
Three options to prevent this from occurring:
Within the AVHRR Manager clear the “Save segment files” box
Comment out the AVHRR line from your cast-client-channels_bas.ini file if you
John,
Three options to prevent this from occurring:
Within the AVHRR Manager clear the “Save segment files” box
Comment out the AVHRR line from your cast-client-channels_bas.ini file if you
|
By
Ferdinand Valk
·
#28426
·
|
|
Re: Oh My Goodness - recovered HDD space!
John,
[]
Within the AVHRR Manager clear the ???Save segment files??? box
[]
Hope this helps,
Ferdinand
=====================================
Good advice, Ferdinand, to which I would add:
- use the
John,
[]
Within the AVHRR Manager clear the ???Save segment files??? box
[]
Hope this helps,
Ferdinand
=====================================
Good advice, Ferdinand, to which I would add:
- use the
|
By
David J Taylor
·
#28427
·
|
|
Re: Oh My Goodness - recovered HDD space!
Hello Ferdinand,
Thanks for your advice.
I unticked the "Save segment files" box.
Regarding your second suggestion - er, believe it or not, I'm I'm still using Tellicast 2.4.4a.
I do however have -
Hello Ferdinand,
Thanks for your advice.
I unticked the "Save segment files" box.
Regarding your second suggestion - er, believe it or not, I'm I'm still using Tellicast 2.4.4a.
I do however have -
|
By
geojohnt@...
·
#28428
·
|
|
Re: Oh My Goodness - recovered HDD space!
David,
Thanks also for the advice.
Yes, I've got "Save in compact format" ticked - and "Save thumbnails."
"Combined data retention period" set to 4.
And yes, I (now) have
David,
Thanks also for the advice.
Yes, I've got "Save in compact format" ticked - and "Save thumbnails."
"Combined data retention period" set to 4.
And yes, I (now) have
|
By
geojohnt@...
·
#28429
·
|
|
Tellicast V2.4.4 'configuration.'
Hello All,
Goodness, I do feel like and old duffer!
Having just updated all my SatSignal programmes and seeing a Himawari tab on the latest MDM I'm tentatively
experimenting with HVS-1 on Tellicast
Hello All,
Goodness, I do feel like and old duffer!
Having just updated all my SatSignal programmes and seeing a Himawari tab on the latest MDM I'm tentatively
experimenting with HVS-1 on Tellicast
|
By
geojohnt@...
·
#28430
·
|
|
Re: Tellicast V2.4.4 'configuration.'
Hi John,
The following sats are disseminated from the following folders :
E1H-EPS-10 : Metop C
E1H-RDS-1 : NPP (VIIRS-M)
E1H-TPG-1 : GOES-16
E1H-TPG-2 : Himawari-8
E1H-TPG-3 : GOES-17
E1H-TPG-4 :
Hi John,
The following sats are disseminated from the following folders :
E1H-EPS-10 : Metop C
E1H-RDS-1 : NPP (VIIRS-M)
E1H-TPG-1 : GOES-16
E1H-TPG-2 : Himawari-8
E1H-TPG-3 : GOES-17
E1H-TPG-4 :
|
By
Hugo
·
#28431
·
|
|
Re: formally [MSG-1] Tellicast V2.4.4 'configuration.' - now TC V2.14.4 'configuration.'
Hello All,
I told you I was an old duffer - the Subject should have been Tellicast V2.14.4 'configuration.'
Regards,
John
Hello All,
I told you I was an old duffer - the Subject should have been Tellicast V2.14.4 'configuration.'
Regards,
John
|
By
geojohnt@...
·
#28432
·
|
|
Re: Tellicast V2.4.4 'configuration.'
Greetings John, Yes I have often wondered why EUMETCast don't identify which satellite
is allied to which channel in their listing. Would be most useful. John Morris.
Greetings John, Yes I have often wondered why EUMETCast don't identify which satellite
is allied to which channel in their listing. Would be most useful. John Morris.
|
By
g3pha.morris@btinternet.com
·
#28433
·
|
|
Re: formally [MSG-1] Tellicast V2.4.4 'configuration.' - now TC V2.14.4 'configuration.'
Hello Hugo,
>The following sats are disseminated from the following folders :
>E1H-EPS-10 : Metop C
>E1H-RDS-1 : NPP (VIIRS-M)
>E1H-TPG-1 : GOES-16
>E1H-TPG-2 : Himawari-8
>E1H-TPG-3 :
Hello Hugo,
>The following sats are disseminated from the following folders :
>E1H-EPS-10 : Metop C
>E1H-RDS-1 : NPP (VIIRS-M)
>E1H-TPG-1 : GOES-16
>E1H-TPG-2 : Himawari-8
>E1H-TPG-3 :
|
By
geojohnt@...
·
#28434
·
|
|
Re: Tellicast V2.4.4 'configuration.'
John,
Hurrah! It's not just me?
Thanks for brightening up my day.
Regards,
John.
_________________
John,
Hurrah! It's not just me?
Thanks for brightening up my day.
Regards,
John.
_________________
|
By
geojohnt@...
·
#28435
·
|
|
Re: formally [MSG-1] Tellicast V2.4.4 'configuration.' - now TC V2.14.4 'configuration.'
========================================================================
Yes Hugo's program EUMETCastView does NPP VIIRS and NOAA 20 VIIRS and indeed does all the satellites above in one program if
========================================================================
Yes Hugo's program EUMETCastView does NPP VIIRS and NOAA 20 VIIRS and indeed does all the satellites above in one program if
|
By
Douglas Deans
·
#28436
·
|