John, The photo is attached to my first post of this topic :-). Bear in mind that the pole must be 55mm in diameter (minimum) but should rather be 75mm (optimum for the clamp and high wind loads). The

Hello Ernst, Sorry to hear about your problems - and more so that you are having them with a Gibertini dish. I am hoping to upgrade my system this autumn and would have gone for a 1.25 m Gibertini

David and Hugo I'am just back up and running with my new antenna. There seems quite some change under GNU/Linux if you are receiving with dvb-s2 PCIe cards. K.-P. issued a completely revised

I've tried the 2.14.4 Windows client simply by replacing the .exe and .lic files, and seen no difference. There are two new parameters: delay_channel_leave_time= will keep the multicast channel

I don't know whether this affects EUMETCast as well. Could just be US. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ *Topic: *Planned data delay for Metop-A and Metop-B *Date/TimeMessage Issued: *August 2,

Hugo, If you just receive TC there is *NO* reason to use amd64Bit. Until one year back I only used 32Bit Linux (kernel 4.9.0-3-i686-pae to use my 8GB of memory) on TC receivers. Some distros begin to

Ernst, Because all the Tellicast software is 32bit , is there any reason why I should use a 64bit OS ? My receiving PC is only for receiving Eumetcast. grts, Hugo

Hello Ernst and Christian, Thanks for the quick reply ... Yes it must be something with the 32bit USB subsystem. My OS before the crash was Debian 8 and I I didn't have any problems installing

Hugo The 32-Bit USB subsystem might be the problem: Have you resolved all the missing dependencies? Is pcscd and etokend running? Have you edited the etoken rules? I have not yet installed the latest

Hugo, I changed to 2.14.4-2 without any problems on Debian 9 stretch. You should ask Ernst for his installation documentation on 64 bit systems, maybe there are some useful hints

Hello, A few days ago I had a hard drive crash on my tellicast receiving station. So I had to install a new OS ( Ubuntu 18.04.1 LTS) and the Tellicast software. I decided to use the latest version

Hi Ernst, Thanks for nice description. It was easy to follow your instructions and everything went completely smoothly. At the first sight EUMETCastView 1.4.0 runs quickly and without any visible

Yes, good evening John. I was able to find the missing script that creates two second distinct receive network card. the script was found in a post blog of msg1 groups compiled by David. Run as

Ernst, I feel sorry that you have so much trouble with the dish. But I am happy that you are up and running now. Actually my TP1 SNR is up to 15.4 dB during chilly night hours. Fine tuning is a

Did you run addtap.bat as administrator? Regards John

Fixed the problem by myself with the following script retrieved in a David Taylor post on Msg1 groups rem Add a new TAP DVB virtual ethernet adapter "C: \ Tools \ BDADataEx \ tap \ devcon.exe" install

Good morning, I installed the 6903 tbs, but I can not find the command file to install the second tap card. Inside the file bdadataex 1.1.4.9 does not exist.I only managed to start the dual commands

NOAA have published an update on efforts to resolve the cooling issue with GOES 17 ABI instrument. Please see

Thorsten I drove another 300km to get a second antenna mount for my Gibertini OP 125L. And guess what: I have exactly the same mechanical problem with the elevation setup. No use to deal with these

Thanks David for the information Is it hot in Scotland? Here in Italy my Sr1 uses cooling fan! Best regards Mina Stefano ================================ Mina, I've not detected any heat problems -