Ernst, it's a never ending story...! :-/ I got the new machine but it is not running. After doing some test I think one Dimm is broken. I set it up now with my 16GB module I already had, installed

David, sorry for the delay in reply been consumed with some family problems, however contacted ops at EUMETSAT and they were aware of my problem, apparently you have to run the client by using

David, The files missed you see from receiver HARSTAD are the "Priority *ended*" ones. But TClogSummary 0.91 should be adapted somewat for the changed messages of client 2.12.1. The old client had

David, sorry for the delay in reply been consumed with some family problems, however contacted ops at EUMETSAT and they were aware of my problem, apparently you have to run the client by using

Ernst, thank you very much for that statistic collector. I will give it a try. Maybe you could add an optional summary as David use? Maybe a 'nice to have' and informative

Chris, could your LUTs be corrupt ? Do they work with other satellite images ? Are you trying them in MsgDataManager or GeoSatSignal or ?? Sorry but can't think of anything else at the moment! They

Dear All There is a new Version 1.0 of TelliCastStatsCollector for GNU/Linux on David's page. I streamlined the output format and numbers like 361992837624 (something like that in Bytes you get from

Dear All There is a new Version 1.0 of TelliCastStatsCollector for GNU/Linux on David's page. I streamlined the output format and numbers like 361992837624 (something like that in Bytes you get

Hi Rob, MSG1 is rectifyed to 9.5 degrees for RSS. Cheers, Thorsten

Hi Nigel Yep, tried them all, from top to bottom of the supplied list but all I get is varying shades of greyscale from the vis through all the IR's, but thanks for the response chris

From: mikeg4cfz@... [MSG-1] Hi guys been trying to set up new Dell PC with new Tellicast, but every time I try and start Tellicast Client I get the same error" Cannot find configuration File

Hi guys been trying to set up new Dell PC with new Tellicast, but every time I try and start Tellicast Client I get the same error" Cannot find configuration File cast-client .ini.", have it working

Thanks Douglas, that explains it, I must have missed that it doesn't seem long since it was off for a month! Dave

Hi All Was there any problem with RSS yesterday, I had no images but files were coming into the received folder for RSS when I pressed the start button it just deleted them then more came in which

Christian I tried and -time does not let me give a range. But it takes a * as a wildcard. - time *0:00 should produce all hourly images found -time together with parameter -movie did not

Hi Chris, Have you tried Thermal LUT LUTLandSea-red on IR1 (10.4um) channel of Himawari ? Or is this not what you are looking for? Nigel Sent with AquaMail for Android http://www.aqua-mail.com

Good news is that Tellicast is running again, data channels streaming in and MSG DM displaying images. Quite a relief. Took David Taylors sound advice and revisited the PC's Device Mgr for a

Ernst, you are right. I looked into your xrit2pic.ini file. There is really an enc-speed and I took it over into my .ini. So most things are already working...maybe a time frame/range could

Christian Rob can probably not pack everything on the command line. So for some user preferencies like image size, frame rate, area definition by name etc., you still need the xrit2pic.ini. Look