In message <nacisr+m212na@...> "thorsten.miglus@... [MSG-1]" <MSG-1@...> wrote: Just a suggestion. I have used a similar idea for my turnstile antenna

Hi, now I am back at my old 0.9 m dish. As the wind is blowing at this weekend the 1.2 m dish caused repeated data losses. It is very instable. Just a waste of time to mount it. I am very

Ernst, all is working like a charm! Thanks for you work and the files. Very interesting to read the code and learn. I had to slightly change the code of hex-decimal-conversion in the SNR update file

Simon, thank you for that information and the .zip. I already set up eLuna (many thanks to Ernst) and I'm quite happy with it. :-) Regards, Christian Am 20.02.16 um 10:08 schrieb Simon Proud

David Bit late in replying to you but yes, I have your latest MSG Mgr version downloaded Feb 13th as part of your Toolset Plus suite but none of the pallets will give any colour. What names should I

With reference to David's SR1 update guide I am unable to ping 192.168.10.99 and OpenTelnet fails to open Ipconfig returns 191.168.1.70 and I am unable to find 192.168.10.102 as used by

Simon There is no problem with MRTG except for it's the ancestor of RRDtool and very limited. I used it for traffic graphs of my Cisco Switches and if you want to display your receivers on David's

I've missed most of this conversation but what's the problem with just using MRTG for this? I got that working fine on Ubuntu 14.04, took an hour or so of work but there's plenty of guides on the

Ernst, thank you very much! :-) I will take the offer and learn something more! That's a good clue to check manual with an echo command included. But now I have to look after my dish, receiption

Christian Glad to hear the RRDtool/eLuna monitoring for your GNU/Linux Eumetcast receiver is up and running. To add more graphs you can directly copy create.sh, update.sh, and graph.pm files

Ernst, just inserted the the '1' into the kernel module, it's working! Thank you! :-) If eLuna is working I will try to convert the two values from hex to decimal and maybe start to insert a new

Christian My last hint: I installed eLuna in /var/www/eluna but I just noticed that the README.english of my eLuna version 1.07 proposes to install in /var/www/graphs. I changed the name because

David Bit late in replying to you but yes, I have your latest MSG Mgr version downloaded Feb 13th as part of your Toolset Plus suite but none of the pallets will give any colour. What names should

Christian The graph frames and times you see come from the eluna perl file. It does not mean that the RRDs are actually updated. To check the latter go e.g. to directory

Christian Two more things: I faintly remember that the eLuna files had some wired attributes: e.g. the RRDs should not be set executable but must be writable. Maybe this is fixed in the latest

Ernst, eLuna is working, I see the page and even the graphs, I set up the cronjob and the tables even updates every 5 min as I see the most recent time at the bottom of each graph. But the data

Christian You are probably not updating the RRDs. You have to add a line in /etc/crontab to update all RRDs every 5 minutes. It's described in the eLuna help files. I use the following line, put

Hi Nigel, I am trying to update my SR1 my computer cannot find 192.168.10.102 and to receive the basic I use 192.168.1.70 as in ipconfig and connects to the network and Internet with no problems. My

Hi Ernst, I set the parameters and will reboot at Sunday! So I can use femon to extract these values in dB-great. I just installed eLuna, very nice. But got no data graphs/lines appear inside the

Hi Peter, I haven't been following any previous posts you've made on this subject, so a bit more detail of where you've got to would be a great help ! Am I correct in assuming you are (trying) to use