Roland: Connection RJ45 crossover or not crossover cable? does not matter, I tested both. PING (the address of the SR1: 192.168.10.102) answers (3 of 4) You should have 100% reply, what happens if

Hi all Still a problem with the SR1, Side receiver, it get, menu 5-1, frames arrive long,. PC side nothing, at the level of the system the network tree I do not see the RX1, normal or not ? I have

Geoff, I have a Technisat HD USB DVB-S2 box the same as the one shown on the migration page. It will not work under Windows for the basic service as it is not compatible with VCM . You can receive

Hi all Still a problem with the SR1, Side receiver, it get, menu 5-1, frames arrive long,. PC side nothing, at the level of the system the network tree I do not see the RX1, normal or not ? I

Thank you, John. That explains it! Best regards - Alan S -- Alan Sewards �mail: alan@... web site: http://asewards.free.fr

http://www.eutelsat.com/files/contributed/news/media_library/brochures/EUTEL SAT_SATELLITE_E10A.pdf

Many thanks for your reply -- much appreciated. I have noted that this Technisat HD box will not run the DVB-S2 basic service. Regards Ian.

Ian, This fix util only for SS2 eXpress. I don't know how access I2C-bus from user-space with SS HD USB driver. 18.12.14, 22:50, "'Ian Deans' iandeans142@... [MSG-1]"

EKU test is fine. Logs do make reference to missing key however. Regards John -- Sent with K-@ Mail - the evolution of emailing.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 All, Well I have just built the drivers on a 64bit Centos6 box here (well in the loft). However I had to comment out a part of the compat.h (the bit

Ernst, I set up my Technisat HD USB box again but the CrazyCat fix SS2XPFDX.ex will not load on my computer with the message it has stopped working. I have tried all compatibility ( I am running

Eventually I reinstalled the client software and the EKU. I get a nice pink T and it starts to join the usual channels from receive channels. ini. They register as active then go to connecting. A few

Eventually I reinstalled the client software and the EKU. I get a nice pink T and it starts to join the usual channels from receive channels. ini. They register as active then go to connecting. A few

Enzo, Francois Roland has pointed out that I made an error in describing how to use the site drossel-services.de. I had not understood that the satellite Eutelsat 10E is in fact also known as

Bonjour Fran�ois, Vous avez raison. Je savais que le satellite en question pour les transmissions DVB S-2 est 10 Est, mais je ne savais pas qu'il a aussi le nom de W1 (et aussi 4A!). Donc, il

Thanks David, I'll do that and report back. Regards John -- Sent with K-@ Mail - the evolution of emailing.

Thank you, I appreciate the offer and I will be in touch. Kind regards, Basil

David, Yes I have checked that. Could it be that the Ayecka needs up-grading? Regards, Basil ==================================== No, there should be no need for an upgrade. If you have TeamViewer

OK David, thanks for the information. Regards, Basil

.. further, there were two interruptions to TelliCast yesterday at 13:35 and 14:36 for over three minutes each time. One of these events may have been the trigger, although I didn't see anything