-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 OK well it seems I did not compile the drivers :-( There are a number of issues - any help appreciated, details follow: uname -a gives: Linux

David and Ian The bit that must be changed is in a demodulator chip register. From user space you have either to go via the PCIe bus and a PCIe bridge onto the card or via the USB bus and an USB

Hello Arne, Yes indeed a PING to the first address I have a 3/4 back but the second time 4/4. I use the port "TRAFFIC", the menu 3J I tried "ISOLATED “ and “CONNECTED”. I tried "with" or

Hello David,. Yes the LED on the back is green (RX1) I enclose a picture on the site (F5JPK) of the SR1 (reception) Side receiver, it get, menu 5-1, frames arrive long,. On ' interface_address in

Roland: Connection RJ45 crossover or not crossover cable? does not matter, I tested both. PING (the address of the SR1: 192.168.10.102) answers (3 of 4) You should have 100% reply, what happens if

Hi all Still a problem with the SR1, Side receiver, it get, menu 5-1, frames arrive long,. PC side nothing, at the level of the system the network tree I do not see the RX1, normal or not ? I have

Geoff, I have a Technisat HD USB DVB-S2 box the same as the one shown on the migration page. It will not work under Windows for the basic service as it is not compatible with VCM . You can receive

Hi all Still a problem with the SR1, Side receiver, it get, menu 5-1, frames arrive long,. PC side nothing, at the level of the system the network tree I do not see the RX1, normal or not ? I

Thank you, John. That explains it! Best regards - Alan S -- Alan Sewards �mail: alan@... web site: http://asewards.free.fr

http://www.eutelsat.com/files/contributed/news/media_library/brochures/EUTEL SAT_SATELLITE_E10A.pdf

Many thanks for your reply -- much appreciated. I have noted that this Technisat HD box will not run the DVB-S2 basic service. Regards Ian.

Ian, This fix util only for SS2 eXpress. I don't know how access I2C-bus from user-space with SS HD USB driver. 18.12.14, 22:50, "'Ian Deans' iandeans142@... [MSG-1]"

EKU test is fine. Logs do make reference to missing key however. Regards John -- Sent with K-@ Mail - the evolution of emailing.

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 All, Well I have just built the drivers on a 64bit Centos6 box here (well in the loft). However I had to comment out a part of the compat.h (the bit

Ernst, I set up my Technisat HD USB box again but the CrazyCat fix SS2XPFDX.ex will not load on my computer with the message it has stopped working. I have tried all compatibility ( I am running

Eventually I reinstalled the client software and the EKU. I get a nice pink T and it starts to join the usual channels from receive channels. ini. They register as active then go to connecting. A few

Eventually I reinstalled the client software and the EKU. I get a nice pink T and it starts to join the usual channels from receive channels. ini. They register as active then go to connecting. A few

Enzo, Francois Roland has pointed out that I made an error in describing how to use the site drossel-services.de. I had not understood that the satellite Eutelsat 10E is in fact also known as

Bonjour Fran�ois, Vous avez raison. Je savais que le satellite en question pour les transmissions DVB S-2 est 10 Est, mais je ne savais pas qu'il a aussi le nom de W1 (et aussi 4A!). Donc, il

Thanks David, I'll do that and report back. Regards John -- Sent with K-@ Mail - the evolution of emailing.