Hi Basil, RX1 and RX2 designate the receivers, i.e. where you plug the coax cable coming from the dish into. The data stream still arrives at RX1 even with configuration set 2; unless you switched

Geoff, I have a Technisat HD USB DVB-S2 box the same as the one shown on the migration page. It will not work under Windows for the basic service as it is not compatible with VCM . You can receive

Hi Basil, When you select the channel to be active you must also go down the menu I think to the letter( I ) To make it active check before you do anything but is quite clearly labelled in the

Hello Allan I do not believe, On the menu: which satellite you want to receive: the names of the satellite with the ( -** ) is situated to the East the names of the satellites with ( ** ) is situated

Hi Basil, RX1 and RX2 designate the receivers, i.e. where you plug the coax cable coming from the dish into. The data stream still arrives at RX1 even with configuration set 2; unless you switched

Hi, At the moment I am receiving DVB-S data via the Ayecka SR1 and want to change to DVB-S2. I have followed the instructions in David Taylor's Next-Steps and I now have Config Set1 Not Active and

Hi Geoff,please find the text of a former message I shared with Vincenzo. The sequence of starting telicast is server4pc, then SS2XPFIX.exe, then Telicast.I'm running W7 32bit Home Edition and the

I see on the Eumetsat Eumetcast migration page, they are including the SkyStar 2 eXpress HD card, and its USB version in the list of devices they use. They only give installation info for Linux, but

I've just uploaded a new version of the SR1 Controller which includes the ability to resize the display, which may help those of you viewing with a mobile phone or tablet. Thanks to Ayecka for

Hi all - bit of guidance needed please. I asked Space-Band for as copy of the SR1 Control Programme and they have very efficiently sent me a copy. Problem is getting it to open and run. [] Also the

Nigel, thanks for the immediate reaction. My target is less the ability to upload updates than means to check reception quality etc. remotely through my LAN. Without substantial in-depth-knowledge I

An: <MSG-1@...> Von: "Nigel Evans nigel.m0nde@... [MSG-1]" <MSG-1@...> Datum: Wed, 17 Dec 2014 23:38:58 +0000 Betreff: Re: [MSG-1]

U. Please do not use wampserver. I will check your sr1 serial number tomorrow and advise how to proceed. If you sr1 needs an update this can be done using usb cable and the update files on the geo

This moment had to come - I tried to follow the Eumetsat installation directions step by step, but sometimes things don't work out as expected. XP SP3, to start with. SR1 streams DVB-S (!) data in

Hi Chris It is an executable .jar file hidden in the extension. Do as it says rename'changetojar' to jar extension. then click on the resultant executable! Alan

Chris. First of all what is the serial number of your SR1 so I can identify your SR1 version. Email me nigel.m0nde@... Nigel GEO Shop MSG-1@...> wrote: -- 73 de Nigel

Hi all - bit of guidance needed please. I asked Space-Band for as copy of the SR1 Control Programme and they have very efficiently sent me a copy. Problem is getting it to open and run. I

David in reply to your helpful mail over a week ago I have now reverted back temporarily to my SR1 to test the saving of threshold settings. I have software version 250 installed after an upgrade some

Bonjour francois, With the drossel-services.de site, you have to enter 10 followed by return (Enter) to set the satellite correctly for 10 degrees East. If you enter -10 it will select Eutelsat 1 at

FY-2D image data has started up again just after 16.00 UTC. My guess is that FY-2E will not be far behind. Regards Ian.