I found in the UK the "Inverto Black Pro 3 º twin monoblock" see: http://www.mediasat.com/ content.asp?L=3&IdMen=186 http://www.mediasat.com/content.asp?L=3&IdMen=186 regards Joris

Thank you for your kind suggestions, David ! I have managed to get installed the S2 configuration. S1 will be gone soon, so why bother with the S config. When checking status via Putty link with S2

Von: "'David J Taylor' gm8arv@... [MSG-1]" <MSG-1@...> Datum: Mon, 1 Dec 2014 18:48:47 -0000 For the initial first orientation, I've found that using Google Maps'

http://crazycat69.narod.ru/sattelite/DVBDataEx/SS2XPFIX.zip 01.12.2014, 22:46, "CrazyCat crazycat69@... [MSG-1]" <MSG-1@...>:

Hello everybody, So i make small console util SS2XPFIX.exe, which fix ts mode registers and allow receive DVB-S2 BS without lost. Need run one time after driver start (on system start, before

Dear Mike, thanks for the response and I did know that BDAD was primarily written for USB devices it was just that I thought nothing ventured etc. BDAD recognised the 6925 and after a few jiggles

Hi, thanks David I will try the newer version and make sure that the Tellicast .ini is configured as you suggest. I have read that BDAD software seems to handle the data better and with less

Thanks David!

Von: "'David J Taylor' gm8arv@... [MSG-1]" <MSG-1@...> Datum: Mon, 1 Dec 2014 16:52:42 -0000 David, thanks for the pointer. Cheers, U.

Michele, sure with 80 dish and lnb 0.7 you can not find the transponder. considers that with all that I've done (it would be better still a dish from 120 to 140 but is too expensive in Italy

Remember, remember the second of December! http://www.eumetsat.int/website/home/News/DAT_2418124.html Cheers, David -- SatSignal Software - Quality software written to your requirements Web:

Michele, sure with 80 dish and lnb 0.7 you can not find the transponder. considers that with all that I've done (it would be better still a dish from 120 to 140 but is too expensive in Italy

Good news, bad news. Mike, you seem to have visionary diagnostic skills... :) After unplugging the SATA controller, Windows restarted correctly. So, the source of the problem could already be

Thanks Alan, I suspected as much. Cheers, Guy

Hi Folks, I ordered the AYECKA SR1 and I'm waiting for me to arrive. I currently use 60 cm dish with two LNB which one is connected to the EUROBIRD 9 and the other is connected to HOTBIRD 13. I want

Hi, [] I would like to try BDAData but I am having difficulty in getting the Tellicast client to recognise the data flow can anyone give me any tips on what to do

Hi Orlando, thanks for your reply. I live in Rome and the snow is very rare here :) Do you advise me to call an antenna installer? The doubt about the box was born when I saw that the strength of the

Michele, I'm sorry for your troubles with TBS 5925, I am here to say that from 15 days to me (I live in the north west of Italy), I'm interested in just the basic volume, the same card works very well

Pete, the BDADataEx is really only for the TBS-5925 USB Box, but others have tried it with some units, I suggest you go to the TBS Website at tbsdtv.com/downloads and get the latest software and make

Hi Ian, you are right: it is not a card but a box :) At this point I don't know what the problem is. I installed the 2.0.0.4 tbs drivers and the BDADataEx v.20141107 on a Win XP PC. The BDADataEx sw