|
Re: Equipment for receiving MSG-1
todays 15:15 HRIT scan ?
Yes, there was an HRV segment which had been trucated when
transmitted. The MSG Data Manager, despite being written with
extensive exception handling, failed to pick up
todays 15:15 HRIT scan ?
Yes, there was an HRV segment which had been trucated when
transmitted. The MSG Data Manager, despite being written with
extensive exception handling, failed to pick up
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#210
·
|
|
Re: Equipment for receiving MSG-1
I tested the single PC setup for a couple of days (and at our 13
september meeting at utrecht).
It is possible to receive and process images simultaneously. But you
need to monitor CPU load and
I tested the single PC setup for a couple of days (and at our 13
september meeting at utrecht).
It is possible to receive and process images simultaneously. But you
need to monitor CPU load and
|
By
a_van_belle
·
#209
·
|
|
Re: MSGDatamanager -> Processing older data than today
msg data
processes
message:
than the
Maik,
There is no quick way to disable this feature, which was enabled as
a way of getting round the odd sequence order sometimes seen.
I guess you could try
msg data
processes
message:
than the
Maik,
There is no quick way to disable this feature, which was enabled as
a way of getting round the odd sequence order sometimes seen.
I guess you could try
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#208
·
|
|
Re: MSGDatamanager -> Processing older data than today
Looking at your message's posting date and comparing that to my
calendar, I see a discrepancy. Maybe my calendar is wrong, but maybe
your system date is even more out of range, and maybe that could
Looking at your message's posting date and comparing that to my
calendar, I see a discrepancy. Maybe my calendar is wrong, but maybe
your system date is even more out of range, and maybe that could
|
By
Ulrich G. Kliegis <Ulrich.Kliegis@...>
·
#206
·
|
|
Re: Equipment for receiving MSG-1
From: Dave Cawley
Timestep Dartmouth England
e-mail Information@...
Web site http://www.Time-step.com
Tel. +44 (0)1803 833366
Fax. +44 (0)1803 839498
I expect that if you want absolutely
From: Dave Cawley
Timestep Dartmouth England
e-mail Information@...
Web site http://www.Time-step.com
Tel. +44 (0)1803 833366
Fax. +44 (0)1803 839498
I expect that if you want absolutely
|
By
Timestep <Information@...>
·
#204
·
|
|
Re: Equipment for receiving MSG-1
I agree Alan,
It depends what use you wish to make of the service, just grab a download to see what the weather is up to every few hours or constantly monitor, animate and archive the lot.
Regards,
I agree Alan,
It depends what use you wish to make of the service, just grab a download to see what the weather is up to every few hours or constantly monitor, animate and archive the lot.
Regards,
|
By
Guy Martin <agm@...>
·
#203
·
|
|
Re: Did you get missing segments on 2003 September 20?
wrote:
Folks,
Many thanks for all the reports. It seems that we all saw the same
misisng data (as reported by the MSG Data Manager), which may mean
the data was missing or that there was file name
wrote:
Folks,
Many thanks for all the reports. It seems that we all saw the same
misisng data (as reported by the MSG Data Manager), which may mean
the data was missing or that there was file name
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#202
·
|
|
Re: Equipment for receiving MSG-1
Guy,
You have made my point - we don't *know* how much a second machine is
really needed. We have lots of armwaving but few facts. As it makes a big
difference when looked at in terms of thousands
Guy,
You have made my point - we don't *know* how much a second machine is
really needed. We have lots of armwaving but few facts. As it makes a big
difference when looked at in terms of thousands
|
By
Alan Sewards <alan.sewards@...>
·
#201
·
|
|
Re: Did you get missing segments on 2003 September 20?
By
Douglas Deans <douglas@...>
·
#200
·
|
|
Re: Did you get missing segments on 2003 September 20?
suggests that segments 7 and 8 were missing for channels 1-11 and 17-
24 were missing for the HRV channel for the 20.15 scan.
Thanks, Douglas. I understand you don't take the LRIT? By the way,
the
suggests that segments 7 and 8 were missing for channels 1-11 and 17-
24 were missing for the HRV channel for the 20.15 scan.
Thanks, Douglas. I understand you don't take the LRIT? By the way,
the
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#199
·
|
|
Re: Did you get missing segments on 2003 September 20?
By
Douglas Deans <douglas@...>
·
#198
·
|
|
Re: Did you get missing segments on 2003 September 20?
wrote:
One more thing, could you give your location (general area is
enough) when writing, please? To repeat, negative reports are
equally important!
Thanks,
David
wrote:
One more thing, could you give your location (general area is
enough) when writing, please? To repeat, negative reports are
equally important!
Thanks,
David
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#197
·
|
|
Re: Equipment for receiving MSG-1
I don't believe the Rx machine needs to be anything special, I use an Abit KT7 with a Duron 800 and its just cruising along consuming minimal resources. However when data arrives it does need to deal
I don't believe the Rx machine needs to be anything special, I use an Abit KT7 with a Duron 800 and its just cruising along consuming minimal resources. However when data arrives it does need to deal
|
By
Guy Martin <agm@...>
·
#196
·
|
|
Did you get missing segments on 2003 September 20?
Did you get any missing segments on 2003 September 20 for the 2015
cycle?
It seems that some people did and some did not, so I would be
interested in knowing what the patter was. If you are
Did you get any missing segments on 2003 September 20 for the 2015
cycle?
It seems that some people did and some did not, so I would be
interested in knowing what the patter was. If you are
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#195
·
|
|
Equipment for receiving MSG-1
While John is busy collating the inputs from those who have participated in
the MSG-1 dissemination trials, I thought it might be of interest to
question some of the basic assumptions. The main one of
While John is busy collating the inputs from those who have participated in
the MSG-1 dissemination trials, I thought it might be of interest to
question some of the basic assumptions. The main one of
|
By
Alan Sewards <alan.sewards@...>
·
#194
·
|
|
Re: MSG-1 user equipment survey.
All,
Just to say many thanks to all those who have already responded, specs are
flooding in and I'm beginning to wonder what I've let myself in for.
No, seriously, we started off with the EUMETSAT
All,
Just to say many thanks to all those who have already responded, specs are
flooding in and I'm beginning to wonder what I've let myself in for.
No, seriously, we started off with the EUMETSAT
|
By
johnrigsec@...
·
#193
·
|
|
Re: delete first image in animation
Many thanks David, that fixed it.
Cheers, Guy
Many thanks David, that fixed it.
Cheers, Guy
|
By
Guy Martin <agm@...>
·
#192
·
|
|
Re: delete first image in animation
half a frame.
Guy, delete the bad JPEG and the cached bitmap in \images\temp and
update the animation.
David
half a frame.
Guy, delete the bad JPEG and the cached bitmap in \images\temp and
update the animation.
David
|
By
David J Taylor GM8ARV 🏴 🇪🇺
·
#191
·
|
|
delete first image in animation
Hi All,
I want to delete the first picture in an animate series, it's only half a frame. I vaguely remember discussion on this but can't find it in my saved e-mails. I thought I would set the time
Hi All,
I want to delete the first picture in an animate series, it's only half a frame. I vaguely remember discussion on this but can't find it in my saved e-mails. I thought I would set the time
|
By
Guy Martin <agm@...>
·
#190
·
|
|
Re: Peculiar speckles on animator
In message <004b01c37fae$69127440$0192fea9@Main>, Sam Elsdon <sam.elsdon@...> writes
Many thanks Sam - understood. Won't try updating drivers!
Cheers,
James
--
James Brown
In message <004b01c37fae$69127440$0192fea9@Main>, Sam Elsdon <sam.elsdon@...> writes
Many thanks Sam - understood. Won't try updating drivers!
Cheers,
James
--
James Brown
|
By
James Brown <james@...>
·
#189
·
|