Hello, As Technisat does not have any desk USB box for Eumetsat data I have to look for another supplier. I know there is a good UK made box available which most of you use. Could you provide me with

Good morning ! Further to my first message I now experience the fact that the number of yellow Ts shown increases rapidly !! Further I glimpse rapid messages saying "connect with localhost" and "wait

OK Geoff, Have not tried my script on Win7 myself so I am not sure my script will work. Even if you point \received\ to your RAM disk you do not need a RAM disk guard script as long as MSG

Thanks to Ian and Arne for your comments. The tmp directory is on the ramdisc. Whilst I agree that as I run a 2 PC setup, the arrangement is not essential, I also use the RX PC for general PC stuff at

Roland, Does anything in the trouble-shooting guide help? http://www.satsignal.eu/wxsat/atovs/EUMETCast-trouble-shooting-guide.html Does your eToken pass EUMETSAT's test? It sounds as if you have

Roland I assume that you have checked that your name and password are correct. Very easy to have an error on that unless you pasted it. Your IP address must be OK if it is

Hello to the Group ! After reloading my system using XP professional now I am plagued by a permanent yellow T. I have tried all versions of the Eumetsat software - from v. 4 to v. 5.5. to no

Today RSS ch12 shows massive thunderclouds forming over Central France with an almost explosive blast of downdraft just before dawn ! I hope this does not result in more flooding. Greetings, Arne

Geoff I would also recommend if you haven't already changed it that you put your temp directory into RAMdisk as well. In recv.ini that is the setting under parameters "temp_directory = ". I have

hello Geoff, Good to hear you have success too. Make sure that your tmp_directory in recv.ini also points to Z: ( I use tmp_directory=Z:\TMP ) When testing is complete I will upload a script

After reading the posts from Arne, I am now running a 700mb ramdisc, (dataram). Its works very well, and my main SATA drive is now a lot quieter, and less active. The ram disc has the RECEIVED and

Yes I lost 1 Met-9 and 1 RSS at about 12.30/35 UTC as a result of the missed packets. Very frustrating as I am presently doing some tests with temp and (or)Tellique in RAMdisk so it makes it a little

Looks like most of us had some missed packets around the 1300hrs. http://www.satsignal.eu/mrtg/EumetcastEurope_MissedPackets.html Cheers James -- James Brown

Thanks Douglas, MDM started to manage this data after I put the data under received\MSG\DEVCOCAST-1\ Greetings, Arne van Belle

-------------------------------------------------- Sent: Wednesday, June 23, 2010 12:34 PM To: "AVHRR" <AVHRR@...> Cc: "MSG" <MSG-1@...> Subject: [MSG-1] EARS Metop

-------------------------------------------------- Sent: Wednesday, June 23, 2010 8:28 PM To: <MSG-1@...> Subject: [MSG-1] Location for received DevCoCast data ? Hello Arne, Yes that is

Excellent, Arne. I hope someone has visualisation software. Many thanks for reporting back. Cheers, David -- SatSignal software - quality software written to your requirements Web:

Somehow I have no luck with the DevCoCast data as MDM does not pick them up from received&#92;MSG&#92; "Manage Devcocast" is checked on the Other tab. Should DevCoCast data have a separate folder

Hello David, I am running MDM Beta version now and have all channels on the MPEF tab selected. New GII-HD and RII-HD are now managed into bfr+ files. Next step is do view these 6 and 11 MB files

MSG Data Manager update: http://www.satsignal.eu/software/beta.htm Cheers, David -- SatSignal software - quality software written to your requirements Web: http://www.satsignal.eu Email: