Date   

Re: Small problem

fvalk <fvalk@...>
 

As you are using XP a surer option might be to simply go back to a previous
restore point. It takes a couple of minutes and all harm and driver issues are
gone as if they never were there in the first place.

Fheers,

Ferdimamd

---------- Original Message -----------
From: John Parkins <john@...>
To: John Parkins <MSG-1@...>
Sent: Thu, 4 Sep 2003 14:41:27 +0100
Subject: Re: [MSG-1] Small problem

Hello all,

Just an update to this, confusing as usual with anything connected
to the SkyStar card. I un-installed the drivers and the card and
then went with the old drivers 4.2.2. This seems to have cured the
problem, but on checking I'm still told I'm using the new 4.2.8
drivers...... I'll just walk away from it slowly and hope it all
carries on working. And just to make this week perfect the other
computer has just made a noise like a cat with it tail on fire, so I
would assume that's a hard disk bearing about to go!


Re: Small problem

John Parkins <john@...>
 

Hello all,

Just an update to this, confusing as usual with anything connected
to the SkyStar card. I un-installed the drivers and the card and
then went with the old drivers 4.2.2. This seems to have cured the
problem, but on checking I'm still told I'm using the new 4.2.8
drivers...... I'll just walk away from it slowly and hope it all
carries on working. And just to make this week perfect the other
computer has just made a noise like a cat with it tail on fire, so I
would assume that's a hard disk bearing about to go!

Thursday, September 4, 2003, 10:01:59 AM, you wrote:

JP> Hello Group,

JP> Got around to finally sorting out my computer yesterday, after a while
JP> it gets so full of 'stuff' it needs a spring clean. So I now have a
JP> brand new installation of Windows XP, but...... Having got the SkyStar
JP> card in and working I installed the Tellique software which also runs.
JP> The problem is that as files are being received I get VERY short
JP> hesitations, as though the computer has come to a halt. Now the
JP> hardware is exactly the same as before, apart from the addition of
JP> more memory, but I have used the updated drivers 4.2.8 for the SkyStar
JP> card, the Tellique software is as before. I have to make clear that it
JP> is only while the Tellique software is running that I get these
JP> hesitations. Anyone having the same problem?






--
Best regards,
John mailto:kvp@...


Re: Small problem

Luca Bertagnolio <lucaberta@...>
 

--- In MSG-1@..., "David Taylor" <david-taylor@b...> wrote:
In view of this, I would suggest not upgrading a system that works,
and waiting until Eumetsat release their new version (if and when)
which has been properly tested.....
I am definitely *not* going to update my drivers!

I have also switched back to the Tellique software I had found on the net before I received the CD from EUMETSAT, as I found that the AstraNet/T-DSL version is much more stable (never had any false start, any double icons in the taskbar and other nasty things).

I found the software here:

http://www.ipviasky.de/tsky/down/downtswin.html

Beware, as you might need some fiddling to extract and configure the Tellique software... but I did it, and worked fine even under Linux.

Bye, Luca


Re: Small problem

Guy Martin <agm@...>
 

A case of 'If it ain't broke don't fix it'.

Guy

----- Original Message -----
From: fvalk
To: MSG-1@...
Sent: Thursday, September 04, 2003 10:45 AM
Subject: Re: [MSG-1] Small problem


John,

I decided to install the new SkyStar 4.2.8 this morning as well and besides of
requiring the repair file, my XP-pro machine shows the same behaviour as you
mention. I personally find it so disturbing that I have decided to roll back to
the 'old' version. That one runs smooth in combination with the Data Manager.

Ferdinand



---------- Original Message -----------
From: John Parkins <john@...>
To: MSG-1 Mailing List <MSG-1@...>
Sent: Thu, 4 Sep 2003 10:01:59 +0100
Subject: [MSG-1] Small problem

> Hello Group,
>
> Got around to finally sorting out my computer yesterday, after a while
> it gets so full of 'stuff' it needs a spring clean. So I now have a
> brand new installation of Windows XP, but...... Having got the SkyStar
> card in and working I installed the Tellique software which also runs.
> The problem is that as files are being received I get VERY short
> hesitations, as though the computer has come to a halt. Now the
> hardware is exactly the same as before, apart from the addition of
> more memory, but I have used the updated drivers 4.2.8 for the SkyStar
> card, the Tellique software is as before. I have to make clear that it
> is only while the Tellique software is running that I get these
> hesitations. Anyone having the same problem?
>
>
>
> --
> Best regards,
> John mailto:kvp@...
>
>
>
> Yahoo! Groups Sponsor
>
> ADVERTISEMENT
>
>
> To unsubscribe from this group, send an email to:
> MSG-1-unsubscribe@...
>
>
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------- End of Original Message -------


Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

----------

http://www.gordano.com - Messaging for educators.


Special MSG meeting September 13 Utrecht

a_van_belle
 

Announcement:

Saturday September 13th: the Werkgroep Kunstmanen organises a special meeting on MSG, which takes place in Utrecht, The Netherlands.
The focus will be on MSG-1 / Eumetsat 8 reception, decoding and image processing. David Taylors lecture on MSG-1 will be central;
Live MSG-1 reception will be set up and imaging and animation will be demonstrated to enhance Davids speech.

HRPT and APT systems will be on display together with examples of home-built antennae and rotators.

Visitors are welcome, please e-mail me off-list me if you wish to attend.

Time: 10:00 to around 15:00 Dutch time
Location: NIMETO college
Smijerslaan 2 , Tuindorp-oost
Utrecht (40 min. by car from Schiphol)
The Netherlands

Arne van Belle
Co-ordinator Radio Observers Werkgroep Kunstmanen
a.van.belle@...

Ruud Jansen
Chairman Werkgroep Kunstmanen

www.kunstmanen.nl


Re: Small problem

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

I personally find it so disturbing that I have decided to roll
back to
the 'old' version. That one runs smooth in combination with the
Data Manager.

Ferdinand
In view of this, I would suggest not upgrading a system that works,
and waiting until Eumetsat release their new version (if and when)
which has been properly tested.....

Cheers,
David


Re: Small problem

fvalk <fvalk@...>
 

John,

I decided to install the new SkyStar 4.2.8 this morning as well and besides of
requiring the repair file, my XP-pro machine shows the same behaviour as you
mention. I personally find it so disturbing that I have decided to roll back to
the 'old' version. That one runs smooth in combination with the Data Manager.

Ferdinand

---------- Original Message -----------
From: John Parkins <john@...>
To: MSG-1 Mailing List <MSG-1@...>
Sent: Thu, 4 Sep 2003 10:01:59 +0100
Subject: [MSG-1] Small problem

Hello Group,

Got around to finally sorting out my computer yesterday, after a while
it gets so full of 'stuff' it needs a spring clean. So I now have a
brand new installation of Windows XP, but...... Having got the SkyStar
card in and working I installed the Tellique software which also runs.
The problem is that as files are being received I get VERY short
hesitations, as though the computer has come to a halt. Now the
hardware is exactly the same as before, apart from the addition of
more memory, but I have used the updated drivers 4.2.8 for the SkyStar
card, the Tellique software is as before. I have to make clear that it
is only while the Tellique software is running that I get these
hesitations. Anyone having the same problem?



--
Best regards,
John mailto:kvp@...



Yahoo! Groups Sponsor

ADVERTISEMENT


To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------- End of Original Message -------


Re: Small problem

fvalk <fvalk@...>
 

John,

I decided to install the new SkyStar 4.2.8 this morning as well and besides of
requiring the repair file, my XP-pro machine shows the same behaviour as you
mention. I personally find it so disturbing that I have decided to roll back to
the 'old' version. That one runs smooth in combination with the Data Manager.

Ferdinand

---------- Original Message -----------
From: John Parkins <john@...>
To: MSG-1 Mailing List <MSG-1@...>
Sent: Thu, 4 Sep 2003 10:01:59 +0100
Subject: [MSG-1] Small problem

Hello Group,

Got around to finally sorting out my computer yesterday, after a while
it gets so full of 'stuff' it needs a spring clean. So I now have a
brand new installation of Windows XP, but...... Having got the SkyStar
card in and working I installed the Tellique software which also runs.
The problem is that as files are being received I get VERY short
hesitations, as though the computer has come to a halt. Now the
hardware is exactly the same as before, apart from the addition of
more memory, but I have used the updated drivers 4.2.8 for the SkyStar
card, the Tellique software is as before. I have to make clear that it
is only while the Tellique software is running that I get these
hesitations. Anyone having the same problem?



--
Best regards,
John mailto:kvp@...



Yahoo! Groups Sponsor

ADVERTISEMENT


To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------- End of Original Message -------


Small problem

John Parkins <john@...>
 

Hello Group,

Got around to finally sorting out my computer yesterday, after a while
it gets so full of 'stuff' it needs a spring clean. So I now have a
brand new installation of Windows XP, but...... Having got the SkyStar
card in and working I installed the Tellique software which also runs.
The problem is that as files are being received I get VERY short
hesitations, as though the computer has come to a halt. Now the
hardware is exactly the same as before, apart from the addition of
more memory, but I have used the updated drivers 4.2.8 for the SkyStar
card, the Tellique software is as before. I have to make clear that it
is only while the Tellique software is running that I get these
hesitations. Anyone having the same problem?



--
Best regards,
John mailto:kvp@...


Re: Oddities with MSG-1

Luca Bertagnolio <lucaberta@...>
 

--- In MSG-1@..., "David Taylor" <david-taylor@b...>
wrote:
Did you notice the strange effects on the midnight images, where
the
top 200 lines or so were misplaced, as if the scan position sensor
was being misled by solar radiation? They didn't show on the 0015
images, so weren't on the LRIT data. Quite noticeable effects on
the 0045 images, though, both visible and thermal channels, and
both
HRIT and LRIT data.
same happened last night, with errors in the 0000, 0030 (bottom),
0045 (middle), 0100 (top). I had a quick look to following slots but
they seemed OK.

Not sure what this could be, but the 0000 and 0100 image have the top
lines wiggling into opposite directions, could this really be related
to solar radiation? Why the opposite directions?

Bye, Luca


TechniSat SkyStar 2 PCI card and USB box software upgrade.

Timestep <Information@...>
 

From: Dave Cawley
Timestep Dartmouth England
e-mail Information@...
Web site http://www.Time-step.com
Tel. +44 (0)1803 833366
Fax. +44 (0)1803 839498

http://www.technisat.com/en/service/download.php

and http://www.t-data.lu/ are more accurate links. The USB version is
particularly worthwhile.

Dave


TechniSat SkyStar 2 PCI card and USB box software upgrade.

johnrigsec@...
 

All,

The software for the TechniSat SkyStar 2 PCI card and USB Box has been
updated
to V. 4.2.8.
There appears (to my eyes) to be several improvements and added facilities.

You can obtain more information from <A HREF="http://www.t-data.lu/">www.t-data.lu</A> where I believe the update
is
available.

Regards,
John Tellick.
RIG.


Re: [rig-l] Oddities with MSG-1

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

Image 0030 (ch01 to 03 and HRV) showed a severe sun glimpse again.
Interesting to see how a solair eqlips is seen by MSG-1, hope that
it
won't damage the delicate SEVERI instrument !
Same here, Arne. I can't believe they would risk damage.

Did you notice the strange effects on the midnight images, where the
top 200 lines or so were misplaced, as if the scan position sensor
was being misled by solar radiation? They didn't show on the 0015
images, so weren't on the LRIT data. Quite noticeable effects on
the 0045 images, though, both visible and thermal channels, and both
HRIT and LRIT data.

Cheers,
David


Re: [rig-l] Oddities with MSG-1

a_van_belle
 

Today Sept. 02, from slot 0800 onwards we have Eastern Europe back on
HRV !

Unfortunaley we had to trade in the western part of Africa now.

Makes one think Eumetsat has subscribed to a "Lite" ADSL line to T-
systems and have to watch their upload quota !

Image 0030 (ch01 to 03 and HRV) showed a severe sun glimpse again.
Interesting to see how a solair eqlips is seen by MSG-1, hope that it
won't damage the delicate SEVERI instrument !


Greetings,
Arne van Belle
Co-ordinator Radio Observers
Werkgroep Kunstmanen


[rig-l] Re: [rig-l] Oddities with MSG-1

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

"How do I ensure I can access the Files and Photos areas of a
group?

To access the Files and Photos areas, please make sure you are
registered with Yahoo!. (If you have a Yahoo! ID, you are already
registered.) Secondly, make sure that you have web memberships for
your group (as opposed to just belonging to a group email list.)"

Thanks, Douglas - I wasn't aware of this as I already have a Yahoo
ID.

David


Re: [rig-l] Re: [rig-l] Oddities with MSG-1

Douglas Deans <douglas@...>
 

----- Original Message -----
From: "Timestep" <Information@...>
To: <rig-l@...>
Sent: Tuesday, September 02, 2003 8:39 AM
Subject: Re: [rig-l] Re: [rig-l] Oddities with MSG-1



From: Dave Cawley
Timestep Dartmouth England
e-mail Information@...
Web site http://www.Time-step.com
Tel. +44 (0)1803 833366
Fax. +44 (0)1803 839498

"not authorized to view
this page"

I get this too, after being asked to put in my password, that was
accepted,
a list of images OK, but then not allowed to view. My Yahoo status is
good
as I moderate several groups and have only one identity !

Dave

There have been some changes to the way Yahoo work. Once you sign in
you will see the relevant link.
I have pasted below the part of the explanation (not pasted too well but
readable) that seems to apply.
I expect the problems people are having is centred round this although I
have not studied the full script.
I have posted to all groups as this is a problem throughout. My apologies
to those who are in all groups for duplication.

Regards
Douglas.


"How do I ensure I can access the Files and Photos areas of a group?

To access the Files and Photos areas, please make sure you are registered
with Yahoo!. (If you have a Yahoo! ID, you are already registered.)
Secondly, make sure that you have web memberships for your group (as opposed
to just belonging to a group email list.)"


Re: Can you access the files OK?

James Brown <james@...>
 

In message <bj0jfl+kpfq@...>, David Taylor <david-taylor@...> writes
I have had two people write and tell me that they cannot access the
following files, even when logged into Yahoo:

http://groups.yahoo.com/group/MSG-1/files/200309010115-msg-ch10.jpg

http://groups.yahoo.com/group/MSG-1/files/200309010030-msg-ch03.jpg

(beware any wrap of the URLs)

Can anyone (other than me) see these images OK?

Thanks,
David
I also get 'you are not authorized to view these pages. David

James
--
James Brown


Re: Can you access the files OK?

Trevor David <tdavid@...>
 

Just tried again and the same results time 07.57
Trevor

----- Original Message -----
From: Luca Bertagnolio
To: MSG-1@...
Sent: Tuesday, September 02, 2003 7:47 AM
Subject: [MSG-1] Re: Can you access the files OK?


When I first tried last night I received an error which was saying
that the download quota for the Yahoo group had been exceeded, but I
just tried it again right now and both images worked fine.

Luca

--- In MSG-1@..., "Trevor David" <tdavid@d...> wrote:
> http://groups.yahoo.com/group/MSG-1/files/200309010115-msg-ch10.jpg
gives me "
> Not authorised to view this page" The other Ok.



Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


Re: Can you access the files OK?

Luca Bertagnolio <lucaberta@...>
 

When I first tried last night I received an error which was saying
that the download quota for the Yahoo group had been exceeded, but I
just tried it again right now and both images worked fine.

Luca

--- In MSG-1@..., "Trevor David" <tdavid@d...> wrote:
http://groups.yahoo.com/group/MSG-1/files/200309010115-msg-ch10.jpg
gives me "
Not authorised to view this page" The other Ok.


Re: Can you access the files OK?

Trevor David <tdavid@...>
 

http://groups.yahoo.com/group/MSG-1/files/200309010115-msg-ch10.jpg gives me "
Not authorised to view this page" The other Ok.

regards Trevor

----- Original Message -----
From: David Taylor
To: MSG-1@...
Sent: Tuesday, September 02, 2003 12:07 AM
Subject: [MSG-1] Can you access the files OK?


I have had two people write and tell me that they cannot access the
following files, even when logged into Yahoo:

http://groups.yahoo.com/group/MSG-1/files/200309010115-msg-ch10.jpg

http://groups.yahoo.com/group/MSG-1/files/200309010030-msg-ch03.jpg

(beware any wrap of the URLs)

Can anyone (other than me) see these images OK?

Thanks,
David


Yahoo! Groups Sponsor



To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@...



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.