Date   

Re: FY-3D

Philip Robinson
 

Ernst
Here they are attached
Many thanks for your help.
I have hardly touched the system configurations for well over a year because i have been receiving lots of data ok for Davids applications. I just thought i would see how good the FY-3D data is and thats where i have now come unstuck.
regards
It must be a tellicast configuration.. but ????
Philip

------ Original Message ------
From: "James Brown" <satellite@...>
Sent: 07/01/2022 08:45:02
Subject: Re: [MSG-1] FY-3D

Yes, and clearly there are others. No point in using Eumetcastview until you are getting the relevant hdf files in your folder. Then you add that directory to the viewer selector. 

Cheers

James

On 6 Jan 2022, at 22:56, Philip Robinson <philip6060@...> wrote:


Hi
I have attached the ini. files i meant to attach earlier. (with no login name and key, temporary deleted for this attachment)
I still have no data from E1H-RDS-2
Is there anyone out there using just windows10 and receiving data succesfully from FY3D, and using those files  in EUMETCastview
I would love to know there settings
If not I may have to give up the idea of using FY3D in  EUMETCastview
I don`t normally give up, but i have run out of ideas
regards
Philip
use philip6060@....If you would you like to send  a private message 
------ Original Message ------
From: "Ernst Lobsiger via groups.io" <ernst.lobsiger@...>
Sent: 06/01/2022 17:49:34
Subject: Re: [MSG-1] FY-3D

Philip,

the way you work this will never fly! You have again posted twice your secret login name and key. YES twice because your cast-client-channels_hvs-1.ini is in fact the same as cast-client_hvs-1.ini.
The log file you publish has entries from HVS-1 as well as Basic Service like DWDSAT and Channel_1 . NO idea how you manage to do that (your basic client seems to log to the hvs-1 log file).

Then of course it's EARS  that has not always files like Meteosat-11. But there is also timeliness (this is not direct readout). My last FY-3D file came in 17:12 UTC.


Ernst

Virus-free. www.avg.com


Re: FY-3D

Philip Robinson
 

Hi
Files attached hopefully
regards
Philip

James.
are you using windows10 for your software

------ Original Message ------
From: "Philip Robinson" <philip6060@...>
Sent: 06/01/2022 22:56:27
Subject: Re: [MSG-1] FY-3D

Hi
I have attached the ini. files i meant to attach earlier. (with no login name and key, temporary deleted for this attachment)
I still have no data from E1H-RDS-2
Is there anyone out there using just windows10 and receiving data succesfully from FY3D, and using those files  in EUMETCastview
I would love to know there settings
If not I may have to give up the idea of using FY3D in  EUMETCastview
I don`t normally give up, but i have run out of ideas
regards
Philip
use philip6060@....If you would you like to send  a private message 
------ Original Message ------
From: "Ernst Lobsiger via groups.io" <ernst.lobsiger@...>
Sent: 06/01/2022 17:49:34
Subject: Re: [MSG-1] FY-3D

Philip,

the way you work this will never fly! You have again posted twice your secret login name and key. YES twice because your cast-client-channels_hvs-1.ini is in fact the same as cast-client_hvs-1.ini.
The log file you publish has entries from HVS-1 as well as Basic Service like DWDSAT and Channel_1 . NO idea how you manage to do that (your basic client seems to log to the hvs-1 log file).

Then of course it's EARS  that has not always files like Meteosat-11. But there is also timeliness (this is not direct readout). My last FY-3D file came in 17:12 UTC.


Ernst

Virus-free. www.avg.com


Re: FY-3D

James Brown
 

Yes, and clearly there are others. No point in using Eumetcastview until you are getting the relevant hdf files in your folder. Then you add that directory to the viewer selector. 

Cheers

James

On 6 Jan 2022, at 22:56, Philip Robinson <philip6060@...> wrote:


Hi
I have attached the ini. files i meant to attach earlier. (with no login name and key, temporary deleted for this attachment)
I still have no data from E1H-RDS-2
Is there anyone out there using just windows10 and receiving data succesfully from FY3D, and using those files  in EUMETCastview
I would love to know there settings
If not I may have to give up the idea of using FY3D in  EUMETCastview
I don`t normally give up, but i have run out of ideas
regards
Philip
use philip6060@....If you would you like to send  a private message 
------ Original Message ------
From: "Ernst Lobsiger via groups.io" <ernst.lobsiger@...>
Sent: 06/01/2022 17:49:34
Subject: Re: [MSG-1] FY-3D

Philip,

the way you work this will never fly! You have again posted twice your secret login name and key. YES twice because your cast-client-channels_hvs-1.ini is in fact the same as cast-client_hvs-1.ini.
The log file you publish has entries from HVS-1 as well as Basic Service like DWDSAT and Channel_1 . NO idea how you manage to do that (your basic client seems to log to the hvs-1 log file).

Then of course it's EARS  that has not always files like Meteosat-11. But there is also timeliness (this is not direct readout). My last FY-3D file came in 17:12 UTC.


Ernst

Virus-free. www.avg.com


Re: FY-3D

Philip Robinson
 

Hi
I have attached the ini. files i meant to attach earlier. (with no login name and key, temporary deleted for this attachment)
I still have no data from E1H-RDS-2
Is there anyone out there using just windows10 and receiving data succesfully from FY3D, and using those files  in EUMETCastview
I would love to know there settings
If not I may have to give up the idea of using FY3D in  EUMETCastview
I don`t normally give up, but i have run out of ideas
regards
Philip
use philip6060@....If you would you like to send  a private message 

------ Original Message ------
From: "Ernst Lobsiger via groups.io" <ernst.lobsiger@...>
Sent: 06/01/2022 17:49:34
Subject: Re: [MSG-1] FY-3D

Philip,

the way you work this will never fly! You have again posted twice your secret login name and key. YES twice because your cast-client-channels_hvs-1.ini is in fact the same as cast-client_hvs-1.ini.
The log file you publish has entries from HVS-1 as well as Basic Service like DWDSAT and Channel_1 . NO idea how you manage to do that (your basic client seems to log to the hvs-1 log file).

Then of course it's EARS  that has not always files like Meteosat-11. But there is also timeliness (this is not direct readout). My last FY-3D file came in 17:12 UTC.


Ernst

Virus-free. www.avg.com


Re: FY-3D

Philip Robinson
 

Hi Ernst
I was rushing that last email, having to go out and i sent the wrong ini files. When i get back i will post the correct ones later that i use
regards
Philip



------ Original Message ------
From: "Ernst Lobsiger via groups.io" <ernst.lobsiger@...>
Sent: 06/01/2022 17:49:34
Subject: Re: [MSG-1] FY-3D

Philip,

the way you work this will never fly! You have again posted twice your secret login name and key. YES twice because your cast-client-channels_hvs-1.ini is in fact the same as cast-client_hvs-1.ini.
The log file you publish has entries from HVS-1 as well as Basic Service like DWDSAT and Channel_1 . NO idea how you manage to do that (your basic client seems to log to the hvs-1 log file).

Then of course it's EARS  that has not always files like Meteosat-11. But there is also timeliness (this is not direct readout). My last FY-3D file came in 17:12 UTC.


Ernst

Virus-free. www.avg.com


Re: FY-3D

Ernst Lobsiger
 

Philip,

the way you work this will never fly! You have again posted twice your secret login name and key. YES twice because your cast-client-channels_hvs-1.ini is in fact the same as cast-client_hvs-1.ini.
The log file you publish has entries from HVS-1 as well as Basic Service like DWDSAT and Channel_1 . NO idea how you manage to do that (your basic client seems to log to the hvs-1 log file).

Then of course it's EARS  that has not always files like Meteosat-11. But there is also timeliness (this is not direct readout). My last FY-3D file came in 17:12 UTC.


Ernst


Re: FY-3D

Philip Robinson
 

Hi Douglas

Thanks

I will let everything run another 24 hours and see if I have any incoming data for FY-3D. I hadn,t realised that data was limited to certain times during the day.

Regards

Philip

 

Sent from Mail for Windows

 

From: Douglas Deans via groups.io
Sent: 06 January 2022 17:30
To: MSG-1@groups.io
Subject: Re: [MSG-1] FY-3D

 

On 06/01/2022 16:41, Philip Robinson wrote:
> Hi David
> Sorry about that. I will copy/paste using notepad in future, as i have
> now done in this post above.
> Unfortunately after carrying out all the alterations suggested by
> yourself and Ernst, i still cannot receive( through tellicast) any files
> from E1H-RDS-2,  or E1H-RDS-1, but as you can see from my latest
> tellicast hvs-1 log file , i have no problems receiving other hvs-1
> services E1H-TPG-1, E1H-TPG-2, E1H-TPG-3.
> I have attached the text files of relevant material
> Really puzzled here as i have no problems with receiving other files
> from bas and hvs-1
> regards
> Philip

============================================================================================

Philip, I have not being following all of this thread but if you only
corrected the "name =" be "name=" issue this afternoon both NPP and
FY-3D (which is the 2 channels concerned) have done their EARS day
passes and will only have a few pole passes (DNB for NPP etc.) in the
coming hours. So perhaps things may still be ok now. Check on your
tracking program for EARS reception.

Regards,
Douglas.




 


Re: FY-3D

Douglas Deans
 

On 06/01/2022 16:41, Philip Robinson wrote:
Hi David
Sorry about that. I will copy/paste using notepad in future, as i have
now done in this post above.
Unfortunately after carrying out all the alterations suggested by
yourself and Ernst, i still cannot receive( through tellicast) any files
from E1H-RDS-2,  or E1H-RDS-1, but as you can see from my latest
tellicast hvs-1 log file , i have no problems receiving other hvs-1
services E1H-TPG-1, E1H-TPG-2, E1H-TPG-3.
I have attached the text files of relevant material
Really puzzled here as i have no problems with receiving other files
from bas and hvs-1
regards
Philip
============================================================================================

Philip, I have not being following all of this thread but if you only corrected the "name =" be "name=" issue this afternoon both NPP and FY-3D (which is the 2 channels concerned) have done their EARS day passes and will only have a few pole passes (DNB for NPP etc.) in the coming hours. So perhaps things may still be ok now. Check on your tracking program for EARS reception.

Regards,
Douglas.


Re: FY-3D

Philip Robinson
 

Hi David
Sorry about that. I will copy/paste using notepad in future, as i have
now done in this post above.
Unfortunately after carrying out all the alterations suggested by
yourself and Ernst, i still cannot receive( through tellicast) any files
from E1H-RDS-2, or E1H-RDS-1, but as you can see from my latest
tellicast hvs-1 log file , i have no problems receiving other hvs-1
services E1H-TPG-1, E1H-TPG-2, E1H-TPG-3.
I have attached the text files of relevant material
Really puzzled here as i have no problems with receiving other files
from bas and hvs-1
regards
Philip

------ Original Message ------
From: "David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺 via groups.io"
<david-taylor@...>
To: MSG-1@groups.io
Sent: 06/01/2022 16:20:27
Subject: Re: [MSG-1] FY-3D

On 06/01/2022 15:48, Philip Robinson wrote:
Hi
Ernst David
I carried alterations to scripts as you suggested. See attached screenshots of
both files.
I also have shown the tellicast log that showsno problems receiving E1H-TPG-1,
E1H-TPG-2 and E1H-TPG-3 channels from hvs-1. but no data being received from
E1H-RDS-2 or E1H-RDS-1
I removed my user name and key just for the attached copy
Any more thoughts
regards
Philip
I hope the changes made things better.

Sorry but I don't do text files when presented as images! They also take up
excessive group storage (at least it was .PNG!).

Cheers,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv




--
This email has been checked for viruses by AVG.
https://www.avg.com


Re: FY-3D

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 06/01/2022 15:48, Philip Robinson wrote:
Hi
 Ernst   David
I carried alterations to scripts as you suggested. See attached  screenshots of
both files.
I also have shown the tellicast log that showsno problems receiving E1H-TPG-1,
E1H-TPG-2 and E1H-TPG-3 channels from hvs-1. but no data being received  from
E1H-RDS-2 or E1H-RDS-1
I removed my user name and key just for the attached copy
Any more thoughts
regards
Philip
I hope the changes made things better.

Sorry but I don't do text files when presented as images! They also take up
excessive group storage (at least it was .PNG!).

Cheers,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: FY-3D

Philip Robinson
 

Hi
 Ernst   David
I carried alterations to scripts as you suggested. See attached  screenshots of both files.
I also have shown the tellicast log that showsno problems receiving E1H-TPG-1, E1H-TPG-2 and E1H-TPG-3 channels from hvs-1. but no data being received  from E1H-RDS-2 or E1H-RDS-1
I removed my user name and key just for the attached copy
Any more thoughts
regards
Philip

------ Original Message ------
From: "Ernst Lobsiger via groups.io" <ernst.lobsiger@...>
Sent: 06/01/2022 13:03:28
Subject: Re: [MSG-1] FY-3D

Philip,

there is more than that. In your cast-client_hvs-1.ini you indicate a tmp_directory that most probably points to C: where your client lives.
In your cast-client-channels_hvs-1.ini you use tmp_directories on D: (they must be on the same drive as your received data, D: is OK!)

Then in cast-client-channels_hvs-1.ini you also have an entry

[channel]
name =E2H-TPG-1
receive_buffer_size=8000000
target_directory=D:\EUMETCast\received\hvs-1\E2H-TPG-1
tmp_directory=D:\EUMETCast\tmp\hvs-1

which clearly sounds like a channel of hvs-2.

Regards,
Ernst

P.S. In cast-client_hvs-1.ini (that you should not publish with your user name and key!) you also have an entry

allow_execute=1

That's the first thing I normally stop. Most Windows users will have it, as they don't read manuals though ...

Virus-free. www.avg.com


Re: FY-3D

Ernst Lobsiger
 

Philip,

there is more than that. In your cast-client_hvs-1.ini you indicate a tmp_directory that most probably points to C: where your client lives.
In your cast-client-channels_hvs-1.ini you use tmp_directories on D: (they must be on the same drive as your received data, D: is OK!)

Then in cast-client-channels_hvs-1.ini you also have an entry

[channel]
name =E2H-TPG-1
receive_buffer_size=8000000
target_directory=D:\EUMETCast\received\hvs-1\E2H-TPG-1
tmp_directory=D:\EUMETCast\tmp\hvs-1

which clearly sounds like a channel of hvs-2.

Regards,
Ernst

P.S. In cast-client_hvs-1.ini (that you should not publish with your user name and key!) you also have an entry

allow_execute=1

That's the first thing I normally stop. Most Windows users will have it, as they don't read manuals though ...


Re: FY-3D

Philip Robinson
 

David
I cant thank you enough
Thats what the problem is. I wondered why i wasnt receiving all the data in hvs-1
I had the "name=" correct on only one of the channels E1H-2PG-2. I knew it would be something simple, i never noticed that. I thought i had checked carefully all the target paths but one little error in the config file caused my problem.
Next job to amend the cast-client-channels_hvs-1.ini
I am sure it will work now and will be the reason i havent been receiving all my data for other software that requires hvs-1.
I am looking forward later to see if EUMETCastview has the files now.
thanks
Philip

------ Original Message ------
From: "David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺 via groups.io" <david-taylor@...>
To: MSG-1@groups.io
Sent: 06/01/2022 11:41:55
Subject: Re: [MSG-1] FY-3D

On 06/01/2022 11:05, Philip Robinson wrote:
Ernst
Good Morning
Attached is a copy of my cast-client-channels_hvs-1.ini file( all channels
named and not default )and also a screenshot of the relevant data in
EUMETCASTview plus the a view of the logfile for TELLICAST hvs-1 just to show i
am receiving other files ok.
Philip,

Shouldn't "name =" be "name=" - no space?

David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv





--
This email has been checked for viruses by AVG.
https://www.avg.com


Re: Bdadataex

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 05/01/2022 17:03, Aldo via groups.io wrote:
Good day to the group
Following the installation information of the Eumetsat TBS6903 card, I cannot
make two Running Dual BDADataEx work.
Someone did it, and how they did it
Thanks if you can give me a solution
kind regards
Aldo Fantoni ik1rgm
Aldo,

I have some notes here:

https://www.satsignal.eu/wxsat/dvb-s2/T1-T2.html#single-cable

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: FY-3D

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 06/01/2022 11:05, Philip Robinson wrote:
Ernst
Good Morning
Attached  is a copy of my cast-client-channels_hvs-1.ini   file( all channels
named and not default )and also a screenshot of the relevant data in
EUMETCASTview plus the a view of the logfile for TELLICAST hvs-1 just to show i
am receiving other files ok.
Philip,

Shouldn't "name =" be "name=" - no space?

David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: FY-3D

Philip Robinson
 

Ernst
Good Morning 
Attached  is a copy of my cast-client-channels_hvs-1.ini   file( all channels named and not default )and also a screenshot of the relevant data in EUMETCASTview plus the a view of the logfile for TELLICAST hvs-1 just to show i am receiving other files ok.
I have created manually the target directory for the files D:\EUMETCast\received\hvs-1\E1H-RDS-2
Once again i checked my portal. I have EARS-MERSI ticked in my regional data services, plus the other EARS services.
I am a little puzzled
I am using Windows10

To help with python by the way. I have arriving today a book Beginners Guide to Python., which should give me more needed knowledge.
thanks again
regards
Philip
PS i have also attached a copy of my cast-client_hvs-1.ini ,but i dont think it will be relevant as i have no other problems with receiving hvs-1 data 

------ Original Message ------
From: "Ernst Lobsiger via groups.io" <ernst.lobsiger@...>
Sent: 06/01/2022 09:50:23
Subject: Re: [MSG-1] FY-3D

Philip,

I also just noticed that the entry I posted further down

# FY-3D, MERSI-2 (EARS)
[channel]
name=E1H-RDS-2
target_directory=/opt/E1H-RDS-2

might not be enoug in your case. It assumes some special general settings in the cast-client_hvs-1.ini file.

Can you post the non working entry you made for channel E1H-RDS-2 and an entry of a channel that works for you?
Have you made the entry for E1H-RDS-2 at the very bottom (again this bottom!)  AFTER  a * default channels entry?
In the latter case you will find your files in the default directory. You almost NEVER need a default directory anyway!

Regards,
Ernst

Virus-free. www.avg.com


Re: FY-3D

Ernst Lobsiger
 

Philip,

I also just noticed that the entry I posted further down

# FY-3D, MERSI-2 (EARS)
[channel]
name=E1H-RDS-2
target_directory=/opt/E1H-RDS-2

might not be enoug in your case. It assumes some special general settings in the cast-client_hvs-1.ini file.

Can you post the non working entry you made for channel E1H-RDS-2 and an entry of a channel that works for you?
Have you made the entry for E1H-RDS-2 at the very bottom (again this bottom!)  AFTER  a * default channels entry?
In the latter case you will find your files in the default directory. You almost NEVER need a default directory anyway!

Regards,
Ernst


Re: FY-3D

Ernst Lobsiger
 

On Wed, Jan 5, 2022 at 04:32 PM, Philip Robinson wrote:
2. I added in my received\channels hvs-1.ini a new channel E1H-RDS-2 with correct target directory ( this is where i created the E1H-RDS-2 folder )
Philip,

you do not have a  "received\channels hvs-1.ini" but a "cast-client-channels_hvs-1.ini" somewhere (you have to be precise here as well). And if this file does have a correct entry for E1H-RDS-2 you do not have to add a folder in your received subdirectory. The Tellicast Client will make that directory automatically. So either you do not receive the FY-3D files at all. This you can check in a verbose log of the HVS-1 client. Or your client cannot write to the directory you made for possible permission problems (e.g. if you made the directory as admin and the client runs as unprivileged user).

Regards,
Ernst

P.S.  MERSI-2, the 2 is just the version of the MERSI instrument, nothing that you find in EOP. Envisat had an instrument named MERIS, just to add some confusion ... :-)


Re: FY-3D

Ernst Lobsiger
 

Philip,

that's what I have in EOP

...
Regional Data Services
  • RDS-EARS
    • EARS-AVHRR
    • EARS-ASCAT
    • EARS-VIIRS
    • EARS-MERSI
...

As you find in my FY-3D.py PyTROLL/Satpy script header the files you should get look like:
...
# File Pattern : {platform_shortname}_{start_time:%Y%m%d_%H%M%S}_{end_time:%H%M%S}_{orbit_number:s}_MERSI_1000M_L1B.{ext}
# File Pattern : {platform_shortname}_{start_time:%Y%m%d_%H%M%S}_{end_time:%H%M%S}_{orbit_number:s}_MERSI_GEO1K_L1B.{ext}
# Example name : FY3D_20200429_011200_011300_12719_MERSI_1000M_L1B.HDF
# Example name : FY3D_20200429_011200_011300_12719_MERSI_GEO1K_L1B.HDF
# Hugo's ruler : 0123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012
# copied EMCV  : 0         1         2         3         4         5         6         7         8         9         10
...

Hope that helps,
Ernst


Re: FY-3D

Philip Robinson
 

Hi
I am trying to retrieve mersi data but still failing. I am a bit mystified why i cannot. All settings seem to be correct.
1. I have permission from the portal for RDS-EARS-MERSI . I noticed that there wasnt  a service available for MERSI 2.
2. I added in my received\channels hvs-1.ini a new channel E1H-RDS-2 with correct target directory ( this is where i created the E1H-RDS-2 folder )

Now in EUMETCAStview application software.
1. In EUMETCASTview , I did an update TLE`s
2. I ticked the box FENGYUN3D
3 I added a directory in EUMETCASTview Segments directory ensuring it was the correct path to the E1H-RDS-2 folder, and the box to the left was ticked.
4. After reloading segments i do not get any data segments building up in the EUMETCASTVIEW Nbr.in dir

I triple checked the targets using correct \ slashes for windows  paths, and also made sure  the hvs-1 tellicast was receiving data. I checked the logs but there are no entries for E1H-RDS-2 files  but lots of other incoming files.

But   there are still no files in the E1H-RDS-2 ( I think i should be  having .HDF files) . Although i do have files in the E1H-TPG-1 andE1H-TPG-3 folders, so tellicast was receivng files through hvs-1 ok

I do have in EUMETCASTview  segment files from FengYun 2H and FengYun 2G ( they are received though, through received\BAS\Data Channel 12)

I am  bit mystified. 
Could it  be me missing something.
 I havent seen any notice about the MERSI operating section of the FY-3D satellite being down.
The only idea i can think of, is that the portal at EUMETSAT should have a RDS-EARS-MERSI 2 service. But from what i can make out the RDS-EARS-MERSI service should be fine anyway

I am using Windows10

Any thoughts out there. I am a bit reluctant using SATpy until i am happy using it. But i haven't any downloaded data available, so i would still be stuck anyway.

regards
Philip


------ Original Message ------
From: "James Brown" <satellite@...>
Sent: 05/01/2022 09:18:57
Subject: Re: [MSG-1] FY-3D

Hello Phillip,
This channel is available on HVS1 and you may find this channel guide a help:


And this one specifically for FY3


So you need to be subscribed to this via the portal and then include in your hvs channels ini. 

All the best. 

James

On 5 Jan 2022, at 09:01, Philip Robinson <philip57@...> wrote:



Hi James
Can you help with this question in your own time
  I havent used data from FY3D before using EMETCastView.
Can you tell me the segment received directory.Would i create E1H-RDS-2 in the cast-client-channels_hvs-1.ini folder (I also tried using the details in the bas folder)  and i am sure i have permission from EUMETSat for that data but can you clarify what is the particular data you require from the EOPortal. I have also FENGYUN 3D ticked in EUMETCastview
I have tried various settings but i have no data in the received\ E1H-RDS-2 folder
When you have some time would you clarify those settings and permissions from EUMETSAT EOPortal please.
thanks
Philip
------ Original Message ------
From: "Hugo" <hvanruys@...>
Sent: 04/01/2022 15:47:11
Subject: Re: [MSG-1] FY-3D

Hi James,

The button "Show All Segments" (if activated) shows all the segments received that day. When this button is NOT active than it shows a few segments that you can change with the scrollbar on the left of the 3D Globe.
The number of segments shown is indicated by the spin box "Show number of segments in satellite path" on the "Satellite Setup" screen.
This way you can visualize all the segments received by changing the scrollbar with the mouse( hold left mouse button).
Hope this helps ...

grts,

Hugo

Virus-free. www.avg.com

1401 - 1420 of 33935