Date   

Re: Beware clocks at the end of DST - (was: Re: [MSG-1] TelliCastStatsCollector.cmd 3.1 Beta)

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 31/10/2021 08:54, Ernst Lobsiger via groups.io wrote:
David,
has this job been scheduled daily at some start time + every 5 minutes (for that day)
or has this job been scheduled just once in the past + every 5 minutes (forever ...)?
Regards,
Ernst
Ernst, my previous reply may have been unclear. It's a "just once" "forever" job.

I'll attach the settings for a typical repeated clean-out job (this one runs once every 15 minutes).

Cheers,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: Beware clocks at the end of DST - (was: Re: [MSG-1] TelliCastStatsCollector.cmd 3.1 Beta)

Ernst Lobsiger
 

David,

the Windows scheduler always works in and shows wall clock time according to your timezone settings unless you set the switch "Synchronize accross timezones".
It was my understanding that if you start once and repeat every say 5 minutes forever only the start time would be shifted by 1h when DST is set from on to off.
Apparently a gap is introduced much later and I was wrong. That's why I always set my receivers to UTC. With MEZ and DST set I have e.g. the following problem:

If I want to setup a schedule for a LEO satellite pass at 10:00 UTC in summertime I have to make a schedule 12:00 MEZ and set 'Synchronize accross timezones'.
If I want to setup a schedule for a LEO satellite pass at 10:00 UTC in   wintertime  I have to make a schedule 11:00 MEZ and set 'Synchronize accross timezones'.

If my PC runs under UTC I just schedule the LEO pass at 10:00 whether summer or winter or with and without 'Synchronize accross timezones'. Much easier.

Cheers,
Ernst


Re: Beware clocks at the end of DST - (was: Re: [MSG-1] TelliCastStatsCollector.cmd 3.1 Beta)

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 31/10/2021 08:54, Ernst Lobsiger via groups.io wrote:
David,
has this job been scheduled daily at some start time + every 5 minutes (for that day)
or has this job been scheduled just once in the past + every 5 minutes (forever ...)?
Regards,
Ernst
Ernst,

It's a forever job, but working (incorrectly) in clock time rather than UTC.

David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: Beware clocks at the end of DST - (was: Re: [MSG-1] TelliCastStatsCollector.cmd 3.1 Beta)

Ernst Lobsiger
 

David,

has this job been scheduled daily at some start time + every 5 minutes (for that day)
or has this job been scheduled just once in the past + every 5 minutes (forever ...)?

Regards,
Ernst


Beware clocks at the end of DST - (was: Re: [MSG-1] TelliCastStatsCollector.cmd 3.1 Beta)

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 23/10/2021 12:06, Ernst Lobsiger via groups.io wrote:
You can schedule it today (at any hour XX:29) and do not have to wait for 00:29
next day.
"Synchronize accross time zones" is not necessary. There is a lot of
misunderstanding
about what this switch does found on the Internet. The truth is best explained
in this blog:

https://www.thecliguy.co.uk/2020/02/09/scheduled-task-trigger-synchronize-across-time-zones/
<https://www.thecliguy.co.uk/2020/02/09/scheduled-task-trigger-synchronize-across-time-zones/>

Cheers,
Ernst
Folks,

If you are relying on something like TrimTree to keep RAMdisk size under
control or to remove unwanted data, be sure to have "Synchronize across time
zones" set! If not, the job will not run for almost an hour, and you may run
out of RAMdisk (as I did this morning).

For example, a job scheduled to run every 5 minutes:

01:58 - job runs - next run 02:03
Clock resets one hour
01:03 - job should run, but the next run isn't until 02:03
01:08
01:13
.
.
01:58
02:03 - job runs.

A whole hour is missed. In my case, the HVS-2 data is deleted shortly after
processing, but now 1/14 of the data isn't deleted, that's more than 20 GB, and
my RAMdisk is only 8 GB.

Be sure to check: "Synchronize across time zones".

Cheers,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: SR1 or the TBS for sale

Vincenzo Mone
 

Too High. Thanks

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




*********************************
****** GSM +39 328 7110193 ******
***** SMS +39 328 7110193 *****
*********************************

-----Messaggio originale-----
Da: MSG-1@groups.io <MSG-1@groups.io> Per conto di David J Taylor
GM8ARV ?????????????? ???? via groups.io
Inviato: sabato 30 ottobre 2021 11:28
A: MSG-1@groups.io
Oggetto: Re: [MSG-1] SR1 or the TBS for sale

On 30/10/2021 09:53, Vincenzo Mone wrote:
Anyone. The cheapest one.
Thanks

73's de Enzo IK8OZV
eBay has the TBS 5927 for GBP 250. Could negotiate?

David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv



Re: Medicane south of Italy

Ernst Lobsiger
 

Marco,

please try again. If your system does not allow IPs you can try:

http://236-116-153-5.dyn.cable.fcom.ch:85/index.html

Hope this helps,
Ernst


Re: Medicane south of Italy

Marco Martini
 

Non funzionaaaaaa


Il Sab 30 Ott 2021, 15:52 Ernst Lobsiger via groups.io <ernst.lobsiger=belponline.ch@groups.io> ha scritto:
Hi,

during the last few days my receiver Terra also captured the Medicane (Mediterranean Hurricane) that devastated Catania.
See the Meteosat-10 frames and WEBM-Videos on Terra. The Medicane appears bottom right and is now again southbound.

http://5.153.116.236:85

Cheers,
Ernst


Medicane south of Italy

Ernst Lobsiger
 

Hi,

during the last few days my receiver Terra also captured the Medicane (Mediterranean Hurricane) that devastated Catania.
See the Meteosat-10 frames and WEBM-Videos on Terra. The Medicane appears bottom right and is now again southbound.

http://5.153.116.236:85

Cheers,
Ernst


Re: SR1 or the TBS for sale

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 30/10/2021 09:53, Vincenzo Mone wrote:
Anyone. The cheapest one.
Thanks
73's de Enzo IK8OZV
eBay has the TBS 5927 for GBP 250. Could negotiate?

David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: SR1 or the TBS for sale

Vincenzo Mone
 

Anyone. The cheapest one.
Thanks 

73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




     *******************************************
     *******    GSM  +39 328 7110193    *******
     ******       SMS  +39 328 7110193    *******
     ********************************************

Il giorno 30 ott 2021, alle ore 10:44, David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺 via groups.io <david-taylor@...> ha scritto:

On 29/10/2021 22:19, Vincenzo Mone wrote:
Hello to the list,
anyone has either the SR1 or the TBS for sale?
Thanks
73 de Enzo IK8OZV

Which TBS?  PCIe card or USB box?

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv






Re: SR1 or the TBS for sale

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 29/10/2021 22:19, Vincenzo Mone wrote:
Hello to the list,
anyone has either the SR1 or the TBS for sale?
Thanks
73 de Enzo IK8OZV
Which TBS? PCIe card or USB box?

73,
David GM8ARV
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


SR1 or the TBS for sale

Vincenzo Mone
 

Hello to the list,

anyone has either the SR1 or the TBS for sale?

Thanks

 

 

73 de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520





      *********************************

      ******   GSM  +39 328 7110193  ******

      *****     SMS  +39 328 7110193    *****

      *********************************

 


Re: TBS 6903 setup

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 28/10/2021 15:39, Vincenzo Mone wrote:
Bias,
From the picture I see Eutelsat 10E.
We have moved to Eutelsat 25E.
Maybe it is the problem


73's de Enzo IK8OZV
No, still on 10A.

https://www.eumetsat.int/eumetcast-europe-service-transponder-migration

The move in 2023 is to 10B.

David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


Re: TBS 6903 setup

Vincenzo Mone
 

Bias,
From the picture I see Eutelsat 10E.
We have moved to Eutelsat 25E.
Maybe it is the problem 


73's de Enzo IK8OZV
EasyLog 5 BetaTester
EasyLog PDA BetaTester
WinBollet BetaTester
D.C.I. CheckPoint Regione Campania
Skype: ik8ozv8520




     *******************************************
     *******    GSM  +39 328 7110193    *******
     ******       SMS  +39 328 7110193    *******
     ********************************************

Il giorno 28 ott 2021, alle ore 16:31, boaz.n@... ha scritto:

Hello,
After trying to follow step by step the manual of setting up the connection to EumetCast something is wrong.
I am trying to connect with single LNB and single cable to the 6903 PCIe card and getting unlocked status with strong strength signal and zero quality .
Attached the situation I am currently in.
What should I check? How can this be fixed?

Thanks.

Boaz


Re: TBS 6903 setup

David J Taylor GM8ARV 🏴󠁧󠁢󠁳󠁣󠁴󠁿 🇪🇺
 

On 28/10/2021 14:16, boaz.n@... wrote:
Hello,
After trying to follow step by step the manual of setting up the connection to
EumetCast something is wrong.
I am trying to connect with single LNB and single cable to the 6903 PCIe card
and getting unlocked status with strong strength signal and zero quality .
Attached the situation I am currently in.
What should I check? How can this be fixed?

Thanks.

Boaz
Boaz,

Welcome to the group!

Commonly the problem is that the antenna is pointed at the wrong satellite.
Can you confirm that the antenna pointing is correct, and that you really do
have a signal at the end of the cable?

Cheers,
David
--
SatSignal Software - Quality software for you
Web: https://www.satsignal.eu
Email: david-taylor@...
Twitter: @gm8arv


TBS 6903 setup

boaz.n@...
 

Hello,
After trying to follow step by step the manual of setting up the connection to EumetCast something is wrong.
I am trying to connect with single LNB and single cable to the 6903 PCIe card and getting unlocked status with strong strength signal and zero quality .
Attached the situation I am currently in.
What should I check? How can this be fixed?

Thanks.

Boaz


Re: GEOS 17 anomaly?

geojohnt@...
 

Hello Ferdinand,

Good to hear from you.

Thanks for the useful and informative information.

Best wishes,
John.

+++++++++++++++++


-----Original Message-----
From: Ferdinand Valk <fvalk@...>
To: MSG-1@groups.io
Sent: Wed, 27 Oct 2021 13:30
Subject: Re: [MSG-1] GEOS 17 anomaly?

Hi John,
 
This is not you but intended behaviour of Goes-17 due to a cooling issue on that satellite.
 
Cheers,
Ferdinand
 
 
From: MSG-1@groups.io On Behalf Of geojohnt via groups.io
Sent: Wednesday, 27 October, 2021 11:27
To: msg-1@groups.io
Subject: [MSG-1] GEOS 17 anomaly?
 
Hello All,
 
I'm not sure if this has been discussed before - probably - but there appears to be an anomaly with (some?) GOES 17 WV channels?
Or it might be 'me?'
 
I don't take all GOES E and W channels on ABI Manager but GeoSatSignal requires channel B08 WV for false colour processing.
GOES 17's B08 channel is corrupted for a long time owing to possible sunlight intrusion into the sensor?
This does not happen with GOES 16.
 
Yes we know geostationary satellites have a problem when the sun is at the Earth's edge with light spill into the imager - but GOES 17 B08 and B10 appear to effected for many hours when the the Sun is rising and 'crossing from the east.'
This doesn't happen when the Sun is 'in the west.'
And it doesn't happen to GOES 16 B08 and B10.
 
The effect has cleared by the 16:30 UTC cycle.
 
Image 1 shows GOES 17 not effected with Sun W and GOES 16 with Sun E (not effected).
Image 2 GOES 17 at 13:00.
Image 3 GOES 17 still effected at 15:30
 
????
 
Regards,
John Tellick.
 
 
 
 


Re: GEOS 17 anomaly?

Ferdinand Valk
 

Hi John,

 

This is not you but intended behaviour of Goes-17 due to a cooling issue on that satellite.

See https://www.goes-r.gov/users/GOES-17-ABI-Performance.html for a bit of background.

 

Cheers,

Ferdinand

 

 

From: MSG-1@groups.io On Behalf Of geojohnt via groups.io
Sent: Wednesday, 27 October, 2021 11:27
To: msg-1@groups.io
Subject: [MSG-1] GEOS 17 anomaly?

 

Hello All,

 

I'm not sure if this has been discussed before - probably - but there appears to be an anomaly with (some?) GOES 17 WV channels?

Or it might be 'me?'

 

I don't take all GOES E and W channels on ABI Manager but GeoSatSignal requires channel B08 WV for false colour processing.

GOES 17's B08 channel is corrupted for a long time owing to possible sunlight intrusion into the sensor?

This does not happen with GOES 16.

 

Yes we know geostationary satellites have a problem when the sun is at the Earth's edge with light spill into the imager - but GOES 17 B08 and B10 appear to effected for many hours when the the Sun is rising and 'crossing from the east.'

This doesn't happen when the Sun is 'in the west.'

And it doesn't happen to GOES 16 B08 and B10.

 

The effect has cleared by the 16:30 UTC cycle.

 

Image 1 shows GOES 17 not effected with Sun W and GOES 16 with Sun E (not effected).

Image 2 GOES 17 at 13:00.

Image 3 GOES 17 still effected at 15:30

 

????

 

Regards,

John Tellick.

 

 

 

 


GEOS 17 anomaly?

geojohnt@...
 

Hello All,

I'm not sure if this has been discussed before - probably - but there appears to be an anomaly with (some?) GOES 17 WV channels?
Or it might be 'me?'

I don't take all GOES E and W channels on ABI Manager but GeoSatSignal requires channel B08 WV for false colour processing.
GOES 17's B08 channel is corrupted for a long time owing to possible sunlight intrusion into the sensor?
This does not happen with GOES 16.

Yes we know geostationary satellites have a problem when the sun is at the Earth's edge with light spill into the imager - but GOES 17 B08 and B10 appear to effected for many hours when the the Sun is rising and 'crossing from the east.'
This doesn't happen when the Sun is 'in the west.'
And it doesn't happen to GOES 16 B08 and B10.

The effect has cleared by the 16:30 UTC cycle.

Image 1 shows GOES 17 not effected with Sun W and GOES 16 with Sun E (not effected).
Image 2 GOES 17 at 13:00.
Image 3 GOES 17 still effected at 15:30

????

Regards,
John Tellick.




1161 - 1180 of 33265