|
Re: FY-3D
Douglas Deans
On 24/10/2020 19:42, Ernst Lobsiger via groups.io wrote:
On Fri, Oct 23, 2020 at 12:06 PM, Douglas Deans wrote:========================================================================== Thanks Ernst. As I said previously it is suspicious that it is (from memory) the 3 satellites that transmit in the 7800 MHz band. Regards, Douglas.
|
|
|
|
Re: FY-3D
Ian Deans
On 24/10/2020 19:42, David J Taylor GM8ARV 🏴 🇪🇺 via groups.io wrote:
Can someone give me "some way" (e.g. wetransfer) a FY3D file? I can't receive that right now; want to try this with xrit2pic.========================================= Sorry David,I did not have any files as I was not taking the satellite data as I had no way of using the data in windows. I will start taking data tomorrow for one day, so I have files available. Regards Ian.
|
|
|
|
Re: FY-3D
Hi Rob and David
Here is one attached Regards Graham ========================== Many thanks, Graham. Do you happen to know anything about file names, and what length (minutes/seconds) each file is? I see GEO1K files which are ground location data, I guess. Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
|
|
|
Re: FY-3D
Can someone give me "some way" (e.g. wetransfer) a FY3D file? I can't receive that right now; want to try this with xrit2pic.
Regards, Rob. ============================ I found some, but I don't yet know channels etc.: https://1drv.ms/u/s!AklMlWF4OUEFqSIm7DWP6mdQ_8aO?e=q1unIx Good luck! Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
|
|
|
Re: FY-3D
Graham Woolf
Hi Rob and David
Here is one attached Regards Graham
|
|
|
|
Re: FY-3D
Can someone give me "some way" (e.g. wetransfer) a FY3D file? I can't receive that right now; want to try this with xrit2pic.
Regards, Rob. ======================= I asked Ian Deans for one as well! Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
|
|
|
Re: FY-3D
Ernst Lobsiger
On Fri, Oct 23, 2020 at 12:06 PM, Douglas Deans wrote:
Yes but not just yet as I am very busy at the moment (decorating a room that needs to get back in use !).Douglas, Graham, and John I had a look at all three sats Noaa_20 (VIIRS), Suomi_NPP (VIIRS), and FY-3D (MERSI) for the last 3 days. It's quite obvious that the EARS processing/dissemination chain is broken somehow. I'll report that to OPS. Regards Ernst
|
|
|
|
Re: FY-3D
R. Alblas
Can someone give me "some way" (e.g. wetransfer) a FY3D file? I can't receive that right now; want to try this with xrit2pic.
toggle quoted messageShow quoted text
Regards, Rob.
On 10/23/2020 09:06 PM, Douglas Deans via groups.io wrote:
On 23/10/2020 18:24, Graham Woolf wrote:Hi all==================================================================================
|
|
|
|
Re: Eumetcast Tuner
Hello
I would like to by Eumetcast Satellite receiver . CAN be any suitable device I loose my second processing unit during thunderstorm Br. Esko Petäjä ------------------------------------------------ Esko, Sorry to hear that! I don't associate Finland with a high thunderstorm risk. How did the device fail - was it through the power connections, network connections, or the RF input? I know that some people have had power supply failures (overheating?). If the failure was through the RF connector perhaps there's a lightning arrester you could fit? These should be easily available for the F connector used in satellite TV, but check they are rated for up to 1.7 GHz (satellite TV could be up to 2 GHz). 73, David GM8ARV -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
|
|
|
Re: Double tuner in T1/T2
Hello
I am just updating my systems. Is it possible to use double tuner capability of devices to receive from both transponders T1/T2 with same card. ?? TBS-6903/6908 or SR 1 Br. Esko Petäjä ============================== Esko, Yes, I'm using a TBS6903 PCIe card in a PC receiving both T1/HVS-1 and T2/HVS-2 (likely it would do BAS as well but I have no need in that PC). It's in the single-cable configuration. Works well, but the TBS IP reception software continually crashed that Windows-10 PC, so I use BDADataEx instead. It doesn't stretch that PC much - it's receive-only supply a limited subset of HVS-1 data (GOES-16/17 and Himawari) over the house network. https://www.satsignal.eu/mrtg/performance_lund.php SR1 - one transponder only. 73, David GM8ARV -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
|
|
|
Re: Double tuner in T1/T2
Ernst Lobsiger
Hello
toggle quoted messageShow quoted text
Double tuner with T1+T2 reception is possible with 1 TBS-6903 even with a single cable. TBS-6908 is like 2 x TBS-6903 (overkill, up to 4 transponders like T1 or T2 possible). An SR1 can only receive 1 transponder of the EUMETCast T1 or T2 kind (with ACM/VCM). So you need 2 SR1 for T1+T2 and 2 LNB cables or 1 LNB cable and a HF power splitter. Regards Ernst Am 24.10.2020 10:25, schrieb Esko Petaja:
Hello
|
|
|
|
Eumetcast Tuner
Esko Petaja
ello
I would like to by Eumetcast Satellite receiver . CAN be any suitable device I loose my second processing unit during thunderstorm Br. Esko Petäjä esko.petaja@... +358505255236
|
|
|
|
Double tuner in T1/T2
Esko Petaja
Hello
I am just updating my systems. Is it possible to use double tuner capability of devices to receive from both transponders T1/T2 with same card. ?? TBS-6903/6908 or SR 1 Br. Esko Petäjä
|
|
|
|
Re: FY-3D
Douglas Deans
On 23/10/2020 18:24, Graham Woolf wrote:
Hi all================================================================================== Yes but not just yet as I am very busy at the moment (decorating a room that needs to get back in use !). I look forward to seeing what Eumetsat say about the NPP, NOAA 20 issues that John has written to them about and sent verbose log files etc. I am also hoping that they may check some things as they monitor the MSG-1 group although probably not over the weekend. Will keep in touch. Regards, Douglas.
|
|
|
|
Re: FY-3D
Douglas Deans
On 23/10/2020 18:05, Ernst Lobsiger via groups.io wrote:
All==================================================================== That is exactly as I get Ernst. In fact for months prior to that scenario there was a version with just a band across the UK missing and some files for further north. This has been an issue for a while. Regards, Douglas.
|
|
|
|
Re: FY-3D
David,
The official HDF4/5 does not work for FY3D and as Douglas has confirmed EUMETCastView has not been updated for Windows for FY3D As neither of these programs work I will assume there is little point in sending any files. Many thanks for your offer of help. Regards Ian. ========================= Ian, Remember that Windows now has a built-in subsystem for Linux, so perhaps that may be the best route? https://docs.microsoft.com/en-us/windows/wsl/install-win10 It's relatively easy to install. Then you can have the best of both worlds! Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
|
|
|
Re: FY-3D
David,
The official HDF4/5 does not work for FY3D and as Douglas has confirmed EUMETCastView has not been updated for Windows for FY3D As neither of these programs work I will assume there is little point in sending any files. Many thanks for your offer of help. Regards Ian. ============================== Ian, All my work with HDF-5 is from scratch, so I was wandering whether I could at least read the files and produce an image. That's why I asked. However, even if the official HDF-5 reader can't read the files it suggests they are not in strict HDF-5 format! I thought that was why all the new data was moving to HDF-5 as everyone could read it! Cheers, David -- SatSignal Software - Quality software for you Web: https://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
|
|
|
Re: FY-3D
Graham Woolf
Hi all
This mirrors what I am seeing - I havent had a complete image since the 11th Oct Douglas - are you happy to liaise with OPS ? Regards Graham
|
|
|
|
Re: FY-3D
Ernst Lobsiger
All
This is for the problem of FY3D not imaging the U.K.. It's received under GNU/Linux, SAMBA shared and processed with PyTROLL/SatPy under Windows 10. FY3D is an afternoon sat heading north. I attach the image and the files that show that I had no packet lost, no file lost. This can be used in discussions with OPS that sees no problems. The image should have the Isle of Man close to the pass "center": So about half of the expected pass is missing! Cheers Ernst
|
|
|
|
Re: FY-3D
Ian Deans
On 23/10/2020 13:56, David J Taylor GM8ARV 🏴 🇪🇺 via groups.io wrote:
Spare a thought for us Windows guys, we do not have any program that can=================================================================== David, The official HDF4/5 does not work for FY3D and as Douglas has confirmed EUMETCastView has not been updated for Windows for FY3D As neither of these programs work I will assume there is little point in sending any files. Many thanks for your offer of help. Regards Ian.
|
|
|
