Date   
Re: file problem

GERARD BOON
 

Dear Heinz,  

You may have a problem with the location of your received files. Looking at your screenshot of your MSGDataManager it states: C:\EUMETCast\received. Mine is C:\EUMETCast\received\bas.

You should try clicking the box prüfen to check if your files are in the right place, if this finds no files then try adding \bas and check again

Of course it depends on your individual installation but if you used the standard install offered by the Tellicast 2.14.4 that should work.

You can also check on your C: drive to see if you have 2 folders installed: EUMETCast and EUMETSAT , check the first folder which should have 3 subfolders: logs/received/tmp

My received folder has 2 subfolders bas and has-1 because I take both the basic and the high volume service. I am hoping you will at least have bas.

The bas folder on a standard install has a lot of subfolders! Just to get started you will need to ensure that MSGDataManager checks this bas folder as described above.

Hope this helps you

Gerard

Re: file problem

Ernst Lobsiger
 

Heinz,

click on the red WARNING and you should see what the problm is.

Ernst

file problem

Heinz Meschnark
 

Hello!
I am using eumetsat.
As you can see I can recieve the files partially.
When I enter eumetsat.bas, the icon is dark.
Then I get the message "warning reset" or "error".
I am using the Msg Manager V3.1.10.1268 and cannot see this software working.
Please can you help

Re: EARS-VIIRS NOAA-20

Roby
 

Hi Ernst, thanks for help.
I checked the license in Eumetsat, and I realized that I only enabled RDS-EARS-AVHRR and not RDS-EARS-VIIRS.
I requested to be enabled today.
 
thanks again for the help. Happy Easter
Roberto

Re: EARS-VIIRS NOAA-20

Ernst Lobsiger
 

Hi Roberto

The data of Suomi_NPP satellite are now on HVS-1 channel E1H-RDS-1.
The new data of NOAA-20 arrive now on Basic Service channel NPP-2.
Both satellites carry the VIIRS instrument. On EUMETCast you get
M-Bands (SVM..) and DNB-Band (SVDNB..) in two separate file types.

Hope that helps
Ernst


Am 18.04.2019 08:41, schrieb Robydem via Groups.Io:

Hello everyone, I read on the news of Eumetsat that from April 9 data
on NPP-2 channel have been released, but even if enabled for
reception, I do not receive the data.
Can anyone tell me if they are broadcast on BASIC or HVS-1? And if
they are received correctly?
thanks for your attention
best regards and happy Easter
Roberto

EARS-VIIRS NOAA-20

Roby
 

Hello everyone, I read on the news of Eumetsat that from April 9 data on NPP-2 channel have been released, but even if enabled for reception, I do not receive the data.
Can anyone tell me if they are broadcast on BASIC or HVS-1? And if they are received correctly?
thanks for your attention
best regards and happy Easter
Roberto

Re: Pytroll/SatPy for EUMETCast

Ernst Lobsiger
 

Hartmut,

If you have a GNU/Linux box it should also be possible to crosscompile that for Windows with mingw64-x86_64-gcc. I never did that but AFAIK that's what Hugo does with EUMETCastView.

If nothing helps ask on the google list Christian pointed to. BTW there are a couple of scripts
you could try that do not need xRITDecompress (e.g Suomi_NPP or NOAA_20 VIIRS).

When it comes to bz2 decompress I do it the GNU/Linux way but I just noted recently
that this is also provided in Python by satpy.readers.utils.unzip_file(...). So don't give up.

Cheers,
Ernst

Re: Pytroll/SatPy for EUMETCast

Christian Peters
 

Hi Hartmut,

maybe have a look here and contact Diego? He seems to solve it...?!

https://groups.google.com/d/msg/pytroll/v37T3uznBeI/hODGLbCwAgAJ

and

https://groups.google.com/d/msg/pytroll/v37T3uznBeI/Vzo9mZY6DwAJ

Regards,

Christian

Am 17.04.19 um 18:30 schrieb Hartmut Schulla:

Hi!

I give up. It’s not possible for me to compile xRITDecompress under windows because the make files are written for Linux bash.

There are so many objectswith dependencies to be separate compiled and linked together.

In Ubuntu compile and link runs smooth, butI dont’t want to setup another PC with Ubuntu.

Regards

Hartmut

 

Von: MSG-1@groups.io [mailto:MSG-1@groups.io] Im Auftrag von Ernst Lobsiger
Gesendet: Dienstag, 16. April 2019 10:42
An: MSG-1@groups.io
Betreff: Re: [MSG-1] Pytroll/SatPy for EUMETCast

 

Hartmut,

there is one point I noticed in the Makefile. Compilation defaults to 32 bits for Windows.
It can and will change to 64 bits for Linux or SunOS automatically. The Makefile dates from
2011, maybe we had no 64bit versions of Windows or Cygwin at that time? Perhaps you
should etdit that for your system and give BITS=64 a try ...

Regards
Ernst


Re: Pytroll/SatPy for EUMETCast

Hartmut Schulla
 

Hi!

I give up. It’s not possible for me to compile xRITDecompress under windows because the make files are written for Linux bash.

There are so many objectswith dependencies to be separate compiled and linked together.

In Ubuntu compile and link runs smooth, butI dont’t want to setup another PC with Ubuntu.

Regards

Hartmut

 

Von: MSG-1@groups.io [mailto:MSG-1@groups.io] Im Auftrag von Ernst Lobsiger
Gesendet: Dienstag, 16. April 2019 10:42
An: MSG-1@groups.io
Betreff: Re: [MSG-1] Pytroll/SatPy for EUMETCast

 

Hartmut,

there is one point I noticed in the Makefile. Compilation defaults to 32 bits for Windows.
It can and will change to 64 bits for Linux or SunOS automatically. The Makefile dates from
2011, maybe we had no 64bit versions of Windows or Cygwin at that time? Perhaps you
should etdit that for your system and give BITS=64 a try ...

Regards
Ernst

Re: Pytroll/SatPy for EUMETCast

Ernst Lobsiger
 

Hi All

Simon has fixed the Electro-L (GOMS2) satpy reader. I have put up a new version of my scripts on Terra with the now working goms2.py satpy script. I also put a couple of Electro_L images from yesterday on Terra. IP still the same ...

Cheers,
Ernst

Re: Pytroll/SatPy for EUMETCast

Ernst Lobsiger
 

Hartmut,

there is one point I noticed in the Makefile. Compilation defaults to 32 bits for Windows.
It can and will change to 64 bits for Linux or SunOS automatically. The Makefile dates from
2011, maybe we had no 64bit versions of Windows or Cygwin at that time? Perhaps you
should etdit that for your system and give BITS=64 a try ...

Regards
Ernst

Re: New version EUMETCastView 1.4.6

Roby
 
Edited

Many thanks, as always everything works perfectly.
But maybe I have a problem with AVHHR image settings:
in globe view, after selecting a segment (metop or noaa) and going to "Make Image" I find myself as a preview always a completely red image. Then if I select a channel (1-5) then it returns to normal.

regards
Roberto

Re: Pytroll/SatPy for EUMETCast

Hartmut Schulla
 

Hi!
Yes, ld not g++ produces the errors. None of external references are resolved.
Link again Windows DLLs will be the solution.
Regards



On Mon, Apr 15, 2019 at 8:14 PM +0200, "Ernst Lobsiger" <ernst.lobsiger@...> wrote:

Hartmut,

Sorry, I just know that CygWin exists :-). It seems there is a problem with linking your object code. Here is some info from the Cygwin FAQ. Hugo is the mingw specialist (used for EUMETCastView) . Maybe Simon has a solution too

Ernst


 

How do I compile a Win32 executable that doesn't use Cygwin?

 

The compilers provided by the mingw64-i686-gcc and mingw64-x86_64-gcc packages link against standard Microsoft DLLs instead of Cygwin. This is desirable for native Windows programs that don't need a UNIX emulation layer.

Re: Pytroll/SatPy for EUMETCast

Ernst Lobsiger
 

Hartmut,

Sorry, I just know that CygWin exists :-). It seems there is a problem with linking your object code. Here is some info from the Cygwin FAQ. Hugo is the mingw specialist (used for EUMETCastView) . Maybe Simon has a solution too

Ernst


 

How do I compile a Win32 executable that doesn't use Cygwin?

 

The compilers provided by the mingw64-i686-gcc and mingw64-x86_64-gcc packages link against standard Microsoft DLLs instead of Cygwin. This is desirable for native Windows programs that don't need a UNIX emulation layer.

New version EUMETCastView 1.4.6

Hugo
 

Hello group,

I uploaded a new version of EUMETCastView 1.4.6. This version supports the new Metop-C images.
You can download it at https://github.com/hvanruys/EUMETCastView/releases
Kind regards,

Hugo

Re: Pytroll/SatPy for EUMETCast

Hartmut Schulla
 

Hi!

I tried CYGWin 64bit but it seems xRITDecompress ist not compatible with 64bit windows environment.

g++ says

/usr/lib/gcc/x86_64-pc-cygwin/7.4.0/../../../../x86_64-pc-cygwin/bin/ld: i386-Architektur der Eingabedatei »xRITDecompress.o« ist inkompatibel zur Ausgabe i386:x86-64“

Regards

Hartmut

 

 

Von: MSG-1@groups.io [mailto:MSG-1@groups.io] Im Auftrag von Ernst Lobsiger
Gesendet: Montag, 15. April 2019 14:59
An: MSG-1@groups.io
Betreff: Re: [MSG-1] Pytroll/SatPy for EUMETCast

 

Hartmut,

https://www.eumetsat.int/website/home/Data/DataDelivery/SupportSoftwareandTools/index.html

has some more info. You will probably go with CygWin.

Ernst

Re: Pytroll/SatPy for EUMETCast

Hartmut Schulla
 

Yes, I see!

Thanks!

Regards

Hartmut

 

Von: MSG-1@groups.io [mailto:MSG-1@groups.io] Im Auftrag von Ernst Lobsiger
Gesendet: Montag, 15. April 2019 14:59
An: MSG-1@groups.io
Betreff: Re: [MSG-1] Pytroll/SatPy for EUMETCast

 

Hartmut,

https://www.eumetsat.int/website/home/Data/DataDelivery/SupportSoftwareandTools/index.html

has some more info. You will probably go with CygWin.

Ernst

Re: Pytroll/SatPy for EUMETCast

Ernst Lobsiger
 

Hartmut,

https://www.eumetsat.int/website/home/Data/DataDelivery/SupportSoftwareandTools/index.html

has some more info. You will probably go with CygWin.

Ernst

Re: Pytroll/SatPy for EUMETCast

Ernst Lobsiger
 

Hartmut,

as described in the HOWTO. The source code is available from EUMETSAT. It is free of charge but must be licensed on an individual basis. You will get a zip File with some instructions inside. You will also need a C-Compiler like gcc.

Ernst

The source code for the wavelet decompression program "xRITDecompress"
is available at http://oiswww.eumetsat.int/WEBOPS-cgi/wavelet/register
You must license and build the software if you do not have it already.

Re: Pytroll/SatPy for EUMETCast

Hartmut Schulla
 

Hi!

There is a small problem:  What’s the meaning for „xRIT decompression binary“ ?

Where to find and is there some „HowTo“ for Windows?

 

Regards

Hartmut