|
Re: Formally lost T icon tellicast - yellow only.
geojohnt@...
David,
Yes, that's right.
I uninstalled the other 2 from that day.
Just to say that the updates still 'appear' to be listed in the second paragraph Quality Updates as being installed.
I should also add, perhaps, that the data port on the SR1 flickers as it should, as does the computer port where the wired lead is connected.
I'm really sorry for all this bother as I don't know/can't the path of the data through the computer to my received folder.
I have no idea about 'data networks.'
Regards,
John
++++++++++++++
In a message dated 14/10/2018 15:25:46 GMT Standard Time, gm8arv@... writes:
If I'm reading the information correctly, KB890830 is just the malicious
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
geojohnt@...
David,
I've uninstalled updates:
KB4462919 and KB100347.
KB890830 - Windows Maliciuos Software Removable Tool - wasn't listed in' Uninstall an update.'
As I closed down a screen came up Configuring Windows Updates, then on Windows restart Configuring Windows Updates again.
And alas, still a yellow T.
Regards,
John.
++++++++++++
In a message dated 14/10/2018 15:05:32 GMT Standard Time, geojohnt@... writes:
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
David,
I've found a reported problem that happened around the time my computer updated - well, the auto rebooting of the PC following an update I'd put off twice: C:\Windows\System32\Pickerhost.exe - Problem Event Name APPCRASH. Is that relevant? And it appears there were three Windows updatea on Friday: KB4462919 KB4100347 KB890830 All three of which are timed after the computer automatic reboot and the appearance of the yellow T. Regards, John. ================================== John, If I'm reading the information correctly, KB890830 is just the malicious software removal tool. The other two might be worth uninstalling, particularly KB4100347. Perhaps someone else has more information? Cheers, David -- SatSignal Software - Quality software for you Web: http://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
geojohnt@...
David,
I've found a reported problem that happened around the time my computer updated - well, the auto rebooting of the PC following an update I'd put off twice:
C:\Windows\System32\Pickerhost.exe - Problem Event Name APPCRASH.
Is that relevant?
And it appears there were three Windows updatea on Friday:
KB4462919
KB4100347
KB890830
All three of which are timed after the computer automatic reboot and the appearance of the yellow T.
Regards,
John.
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
David,
Or do a restore to the day before the Windows update? Though I'm loathed to do that following my Windows problems earlier in the year. Regards, John. ==================================== John, Settings, Updates & Security, View update history, Uninstall updates? Less drastic than Restore! Cheers, David -- SatSignal Software - Quality software for you Web: http://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
In case it helps, here's the startup log from the current client:
MSG:2018-10-14 13:23:09.410:Program started ============= MSG:2018-10-14 13:23:09.410:Watchdog starting... [3704] MSG:2018-10-14 13:23:09.410:Watchdog started [3704]. MSG:2018-10-14 13:23:10.675:Starting new child... MSG:2018-10-14 13:23:10.675:Started new child [8728]. MSG:2018-10-14 13:23:10.958:Log level is "normal". MSG:2018-10-14 13:23:12.208:tc-cast-client starting... [8728] MSG:2018-10-14 13:23:12.208:tc-cast-client version is 2.14.4 (201802141241391) revision 6431c0965bf5 win32-i86pc release ( 6.2.9200 on a 4-processor (GenuineIntel, Pentium III (Model 76, Stepping 4)) system) MSG:2018-10-14 13:23:12.263:License check succeeded MSG:2018-10-14 13:23:12.374:tc-cast-client running [8728]. MSG:2018-10-14 13:23:14.779:Connected to announcement channel `TSL Announcement Channel', address 224.223.222.223:4711 (announcement channel) MSG:2018-10-14 13:23:14.779:Receiver active MSG:2018-10-14 13:23:24.929:tc-cast-client shutting down... [8728] MSG:2018-10-14 13:23:24.932:Disconnect from announcement channel `TSL Announcement Channel', address 224.223.222.223:4711 completed (shutdown) MSG:2018-10-14 13:23:24.973:tc-cast-client stopped [8728]. MSG:2018-10-14 13:23:25.101:Watchdog child quits properly. Shutting down. MSG:2018-10-14 13:23:25.101:Watchdog shutting down ... [3704] MSG:2018-10-14 13:23:25.101:Watchdog stopped [3704]. ================================== I no longer have the old client (from 2006) installed anywhere. That's almost 12 years old. The earlier part of your log does suggest that the program is getting to the Yellow-T state, as there is no Connected to... message. Mine was run on the latest released version of Windows-10/64 - 1809, which is the one which was withdrawn at one stage. I don't see License check succeeded, but perhaps that wasn't in the old log files? Is the eToken, Properties, View eToken Info working? Cheers, David -- SatSignal Software - Quality software for you Web: http://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
geojohnt@...
David,
Or do a restore to the day before the Windows update?
Though I'm loathed to do that following my Windows problems earlier in the year.
Regards,
John.
In a message dated 14/10/2018 14:15:08 GMT Standard Time, gm8arv@... writes:
Your IPconfig looks good, although I tend to remove the IPv6.
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
David,
I shut down the computer overnight as no EUMETCast. This morning I fired it up again and it logged on automatically (as configured to do so) with Desktop and some programmes loading including Tellicast - which remains a yellow T. The Tellicast log file for this is attached as a document and you will see the time gap when I exited TC and opened it again via double click on the Desktop icon. RAMDisk isn't mentioned this time. TC log file attached Do you have a wildcard in the cast-client.ini file: [parameters]recv.ini attached. Does the extra network card have an IP address on the same network as the Ethernet adapter EUMETCast SR 1: Connection-specific DNS Suffix . :ipconfig attached. Sorry for the long delay. I'm typing this on a different computer and transferring things across with a memory stick! I should say that everything was working OK before the Windows update Though I did have an admin tools clean up around the same time. Regards, John Attachments: ipconfig.jpg MSG tc log sept 14.doc recv.ini ============================================ John, Your IPconfig looks good, although I tend to remove the IPv6. I see no errors in the log file. I suspect if you asked EUMETSAT the first thing they would suggest is to upgrade from 11-year-old software! You could, of course, just uninstall the Windows update.... Cheers, David -- SatSignal Software - Quality software for you Web: http://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
geojohnt@...
In a message dated 14/10/2018 09:50:05 GMT Standard Time, gm8arv@... writes:
>It seems you closed TelliCast about three minutes after it started:
>MSG:2018-10-12 22:54:41.955:Program started =============
>MSG:2018-10-12 22:54:43.017:Succeeded to recreate internal file database in directory "Z:\receiving".
>MSG:2018-10-12 22:57:42.821:tc-recv.exe shutting down... [8604]
>Does the RAMdisk/database error occur on starting the program again?
David,
I shut down the computer overnight as no EUMETCast.
This morning I fired it up again and it logged on automatically (as configured to do so) with Desktop and some programmes loading including Tellicast - which remains a yellow T.
The Tellicast log file for this is attached as a document and you will see the time gap when I exited TC and opened it again via double click on the Desktop icon.
RAMDisk isn't mentioned this time.
TC log file attached
>Do you have a wildcard in the cast-client.ini file:
>[parameters] >interface_address=0.0.0.0 recv.ini attached.
>Does the extra network card have an IP address on the same network as the
>Ayecka SR1 data port, typically 192.168.10.<something>. To check, from a >command prompt, issue the "ipconfig" command. Look for something like: >Ethernet adapter EUMETCast SR 1: >Connection-specific DNS Suffix . : >IPv4 Address. . . . . . . . . . . : 192.168.10.104 >Subnet Mask . . . . . . . . . . . : 255.255.255.0 >Default Gateway . . . . . . . . . : ipconfig attached.
Sorry for the long delay. I'm typing this on a different computer and transferring things across with a memory stick!
I should say that everything was working OK before the Windows update.
Though I did have an admin tools clean up around the same time.
Regards,
John
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Its persisitently precipitating
Alan Banks <alanjamesbanks@...>
No let up in the rain this morning as witnessed by my reception graphs. There is a very solid bank of cloud over mainland Britain.
Alan
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
geojohnt@...
Graham,
Thanks for your comments.
My RAMdisk is Dataram Inc.
Regards,
John.
+++++++++++++++++++
In a message dated 14/10/2018 09:54:55 GMT Standard Time, woolfg@... writes:
Hi
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: HVS
Graham Woolf
Hi Robert
have you tried running with the Windows Firewall turned off If you have and there is still the same problems can you post your recv.ini and recv-channels files Regards Graham
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: HVS
Robert Moore
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
Graham Woolf
Hi
If you are using SoftPerfect RAM disk software and your ram disk is bigger than 4Gb then you need to update to the latest version See here https://www.softperfect.com/ Regards Graham
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: HVS
Hi Robert
Can you post your tellicast log file - that might give us a clue Regards Graham =============================== .. or at least the last few lines showing the problem! Otherwise we may rapidly fill our limited, allowed group file space! Cheers, David -- SatSignal Software - Quality software for you Web: http://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: Formally lost T icon tellicast - yellow only.
David,
It seems to me from another topic on this group that there maybe a problem with RAMdisk following the latest Windows update? Anyway - there appeared to have been a problem with RAMdisk in my Tellicast log file, part enclosed: MSG:2018-10-12 22:54:41.955:Program started =============MSG:2018-10-12 22:54:41.955:Watchdog starting... [2652]MSG:2018-10-12 22:54:41.955:Watchdog started [2652].MSG:2018-10-12 22:54:42.423:Starting new child...MSG:2018-10-12 22:54:42.423:Started new child [8604].MSG:2018-10-12 22:54:42.939:tc-recv.exe starting... [8604]MSG:2018-10-12 22:54:42.939:tc-recv.exe version is 2.4.4a (200610301329200) win32-i86pc ( 6.2.9200 on a 4-processor (GenuineIntel, Pentium III (Model 60, Stepping 3)) system)MSG:2018-10-12 22:54:42.939:Log level is "normal".MSG:2018-10-12 22:54:43.017:tc-recv.exe running [8604].WRN:2018-10-12 22:54:43.017:Found corrupted internal file database in directory "Z:\receiving": Database is not clean or has wrong version.WRN:2018-10-12 22:54:43.017:Trying to remove and recreate internal file database.MSG:2018-10-12 22:54:43.017:Succeeded to recreate internal file database in directory "Z:\receiving".MSG:2018-10-12 22:57:42.821:tc-recv.exe shutting down... [8604]MSG:2018-10-12 22:57:42.837:tc-recv.exe stopped [8604].MSG:2018-10-12 22:57:43.040:Watchdog child quits properly. Shutting down.MSG:2018-10-12 22:57:43.040:Watchdog shutting down ... [2652]MSG:2018-10-12 22:57:43.040:Watchdog stopped [2652]. ---------- Z:\ is my RAMdisk. Regards, John ========================================== John, It seems you closed TelliCast about three minutes after it started: MSG:2018-10-12 22:54:41.955:Program started ============= MSG:2018-10-12 22:54:43.017:Succeeded to recreate internal file database in directory "Z:\receiving". MSG:2018-10-12 22:57:42.821:tc-recv.exe shutting down... [8604] Does the RAMdisk/database error occur on starting the program again? Do you have a wildcard in the cast-client.ini file: [parameters] interface_address=0.0.0.0 Does the extra network card have an IP address on the same network as the Ayecka SR1 data port, typically 192.168.10.<something>. To check, from a command prompt, issue the "ipconfig" command. Look for something like: Ethernet adapter EUMETCast SR 1: Connection-specific DNS Suffix . : IPv4 Address. . . . . . . . . . . : 192.168.10.104 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : You can see I renamed my adapter to a more meaningful name! If the IPv4 address starts 169. then you will need to define the address manually. Cheers, David -- SatSignal Software - Quality software for you Web: http://www.satsignal.eu Email: david-taylor@blueyonder.co.uk Twitter: @gm8arv
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: HVS
Graham Woolf
Hi Robert
Can you post your tellicast log file - that might give us a clue Regards Graham
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: HVS
Ernst Lobsiger
Robert, I have never setup a receicer under Windows. But with cast-client-channels_bas.ini sends the data per cast-client-channels_hvs-1.ini sends the data per cast-client-channels_hvs-2.ini sends the data per For EKU problems: In the clients web interfaces host_key_4: ****-****-****-**** What does the "Log File" tab tell you? Regards
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: HVS
Robert Moore
Thanks all.
OS is Windows 10 EUMETCast user_name and user_key in the three files - already there. http://localhost:8100 for BASIC http://localhost:8200 for HVS-1 Both check out and data flowing to client http://localhost:8201 for HVS-2 Nothing, and icon in tray stays yellow. PIDs all updated from EUMETSAT website, as advised. No data in received. Not sure how to fix the HVS-2 yellow I must be very close! Robert
|
||||||||||||||||||
|
|
||||||||||||||||||
|
Re: HVS
Ernst Lobsiger
Robert You do not even tell us what OS you are using (I assume Windows). Fill in your EUMETCast user_name and user_key in the three files cast-client_bas.ini In the channels files all present channels are there but #commented. Receiving the announcement channel but no data can also be an http://localhost:8100 for BASIC BTW the latest client is distributed twice a day in Info-Channeö-1
|
||||||||||||||||||
|
|
||||||||||||||||||
