Date   

Re: mid day today

David J Taylor GM8ARV 🏴󠁧󠁒󠁳󠁣󠁴󠁿 πŸ‡ͺπŸ‡Ί
 

--- In MSG-1@yahoogroups.com, Robert Moore <rsmoore@l...> wrote:
Has anyone looked at an IR animation for the Biscay area today?
Around noon, lines emerged - either ships' trails of aircraft
contrails (the latter, I would think) that appeared to rotate like
the spokes of a wheel - presumably in the upper atmosphere.
Any thoughts on this?
I haven't animated this - it sounds great!

Looking at the static images I think aircraft trails, as you can see
the shadow of some of the trails on the lower clouds. The
dispersion does look more like ship trails, though.

Cheers,
David


Re: mid day today

Alan Sewards <alan.sewards@...>
 

Robert,
I also saw that phenomenon. It seemed as though the lines started off in
mid-Spain heading east-west (or the inverse), and were rotated round and
moved north by the low embedded in the jet stream. I took them to be
aircraft contrails.

Best regards - Alan

----- Original Message -----
From: "Robert Moore" <rsmoore@liverpool.ac.uk>
To: <MSG-1@yahoogroups.com>
Sent: Monday, January 05, 2004 6:50 PM
Subject: [MSG-1] mid day today


Has anyone looked at an IR animation for the Biscay area today? Around
noon,
lines emerged - either ships' trails of aircraft contrails (the latter, I
would
think) that appeared to rotate like the spokes of a wheel - presumably in
the
upper atmosphere.
Any thoughts on this?
Will there be any limit to the amazing things are we going to see through
MSG-1?

Robert



------------------------------
Robert Moore

tel and fax: 44 (0) 1352 714456




Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/MSG-1/

To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/




mid day today

Robert Moore
 

Has anyone looked at an IR animation for the Biscay area today? Around noon,
lines emerged - either ships' trails of aircraft contrails (the latter, I would
think) that appeared to rotate like the spokes of a wheel - presumably in the
upper atmosphere.
Any thoughts on this?
Will there be any limit to the amazing things are we going to see through
MSG-1?

Robert



------------------------------
Robert Moore

tel and fax: 44 (0) 1352 714456


Re: Tellique and the newer Intel & AMD processors

g.kruger <g.kru@...>
 

David,

The Hyperthreading feature of my PC is turned on and I did not get something working wrong.

I use a 3.2 PC, HP enabled and memory is 1024

Cheers

GΓ©rard

----- Original Message -----
From: David Taylor
To: MSG-1@yahoogroups.com
Sent: Sunday, January 04, 2004 3:15 PM
Subject: [MSG-1] Tellique and the newer Intel & AMD processors


Folks,

I note from the release notes that the Tellique software does not
work with the Hyperthreading feature of newer processors enabled.
Indeed, I turned that feature off in the BIOS on my latest PC. Has
anyone tried the software with Hyperthreading enabled? (Recent
Pentium 4 processors have this "HT" feature.)

Looking ahead, has anyone tested with the AMD 64-bit processors?
These are now on sale and being offered to new PC purchasers. I
would hate to think of someone spending a large amount of money only
to find the software didn't work!

Cheers,
David



------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MSG-1/

b.. To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



[Non-text portions of this message have been removed]


Re: Tellique and the newer Intel & AMD processors

Roger Mawhinney <roger@...>
 

I was at a recent seminar (October 2003) in an Intel fabrication plant and
whilst Hyperthreading was not the main topic, it was discussed. It should
work quite transparently with Windows XP, taking advantage of those
operations that specifically support it such as Microsoft Internet Explorer.
In essence, your normal application should run as usual, but applications
such as IE run as if using a second processor. I saw demos using Microsoft
Office, Abode Reader and a few other applications all loading and running
very fast indeed - well they would since it was Intel running them! I would
venture to suggest however, that the motherboard may need to be using
Intel's latest chipset. Also make sure you've got all the latest XP
upgrades and patches from Microsoft and drivers for your PC.
Roger

|-----Original Message-----
|From: David Taylor [mailto:david-taylor@blueyonder.co.uk]
|Sent: 04 January 2004 14:15
|To: MSG-1@yahoogroups.com
|Subject: [MSG-1] Tellique and the newer Intel & AMD processors
|
|Folks,
|
|I note from the release notes that the Tellique software does
|not work with the Hyperthreading feature of newer processors enabled.
|Indeed, I turned that feature off in the BIOS on my latest PC.
| Has anyone tried the software with Hyperthreading enabled?
|(Recent Pentium 4 processors have this "HT" feature.)
|
|Looking ahead, has anyone tested with the AMD 64-bit processors?
|These are now on sale and being offered to new PC purchasers.
|I would hate to think of someone spending a large amount of
|money only to find the software didn't work!
|
|Cheers,
|David
|
|
|
|
|Yahoo! Groups Links
|
|To visit your group on the web, go to:
| http://groups.yahoo.com/group/MSG-1/
|
|To unsubscribe from this group, send an email to:
| MSG-1-unsubscribe@yahoogroups.com
|
|Your use of Yahoo! Groups is subject to:
| http://docs.yahoo.com/info/terms/
|
|
|


Re: Tellique and the newer Intel & AMD processors

Guy Martin <agm@...>
 

Most software isn't written to make use of hyperthreading and as you pointed out some actually fails. In fact most software can't make use of multi-processing. We are (work this is) replacing 100 clients in the summer. 64 bit is an option, if anyone has one let we know what it does, or more importantly doesn't.

Cheers, Guy

----- Original Message -----
From: David Taylor
To: MSG-1@yahoogroups.com
Sent: Sunday, January 04, 2004 2:15 PM
Subject: [MSG-1] Tellique and the newer Intel & AMD processors


Folks,

I note from the release notes that the Tellique software does not
work with the Hyperthreading feature of newer processors enabled.
Indeed, I turned that feature off in the BIOS on my latest PC. Has
anyone tried the software with Hyperthreading enabled? (Recent
Pentium 4 processors have this "HT" feature.)

Looking ahead, has anyone tested with the AMD 64-bit processors?
These are now on sale and being offered to new PC purchasers. I
would hate to think of someone spending a large amount of money only
to find the software didn't work!

Cheers,
David



------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MSG-1/

b.. To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


----------

http://www.gordano.com - Messaging for educators.


Re: Tellique and the newer Intel & AMD processors

fvalk <fvalk@...>
 

I had read the hyperthreading note as well and had it initially disabled.
However once my new PC had become stable I decided to activate it again. Over a
period of about 3 weeks now I didn't get a single disruption, alarm or
unexplained lost segment. So it may not be officially supported (tested?) but
it certainly does work in my system.
On 64 bit CPU I can not tell you.

Cheers,

Ferdinand

---------- Original Message -----------
From: "David Taylor" <david-taylor@blueyonder.co.uk>
To: MSG-1@yahoogroups.com
Sent: Sun, 04 Jan 2004 14:15:26 -0000
Subject: [MSG-1] Tellique and the newer Intel & AMD processors

Folks,

I note from the release notes that the Tellique software does not
work with the Hyperthreading feature of newer processors enabled.
Indeed, I turned that feature off in the BIOS on my latest PC. Has
anyone tried the software with Hyperthreading enabled? (Recent
Pentium 4 processors have this "HT" feature.)

Looking ahead, has anyone tested with the AMD 64-bit processors?
These are now on sale and being offered to new PC purchasers. I
would hate to think of someone spending a large amount of money only
to find the software didn't work!

Cheers,
David



-----------------------------------------------------------------------
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/MSG-1/
To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------- End of Original Message -------


Re: Tellique and the newer Intel & AMD processors

David J Taylor GM8ARV 🏴󠁧󠁒󠁳󠁣󠁴󠁿 πŸ‡ͺπŸ‡Ί
 

--- In MSG-1@yahoogroups.com, "gerald ashford" <gerald.ashford@n...>
wrote:
david
i dont know if i'm looking at the right thing but my p4 has
hyperthreading auto or disabled my computer is set to auto and every
thing is ok nice pictures.
my computer is 2.4cpu 1gig memory may be the 1gig mem helps to
keep it working
gerald
Thanks for the report. It only applies to the PC with the DVB card
and Tellique software installed. Hyperhtreading is only enabled
with Windows XP, service pack 1, I believe. The check is to see if,
when running the Windows Task Manager, Performance tab, two CPU
usage plots are displayed side-by-side or just one.

As I said, I don't have direct experience of this, just what I saw
in the release notes. If it actually does work OK, great!

Cheers,
David


Imminent disruptions

David J Taylor GM8ARV 🏴󠁧󠁒󠁳󠁣󠁴󠁿 πŸ‡ͺπŸ‡Ί
 

Folks,

A reminder that the next two weeks see some interruptions to images,
particularly on Tuesday and Friday. I expect to see a normal flow
of Foreign Satellite Data, but the products derived from MSG-1 data
will be interrupted.

Cheers,
David

This was the Weekly Schedule Report for Week 52/2003 Issued 15:22
18/12/03:


Activities planned for week 02:
There will be an MSG-1 decontamination starting on the 06/01/04.
This procedure will have the following impact on SEVIRI imaging.
06/01/04 from 08:30 until 11:15 there will be no SEVIRI data
available.
06/01/04 from 11:15 until 09/01/04 12:00 only VIS channels will
available with degraded quality.
09/01/04 from 12:00 until 09/01/04 13:15 no SEVIRI data available.
09/01/04 from 13:15 until 13/01/04 09:00 SEVIRI images available
with degraded quality
13/01/04 09:00 Nominal SEVIRI images resume

Activities planned for week 03:
13/01/04 09:00 End of decontamination nominal SEVIRI images resume.
MSG-1 relocation manoeuvre to 3.4 deg. West will begin on 14/01/04.
The drift will last 14 days and will be stopped on 27/01/04.
There may be some degradation to the images during the manoeuvre,
users will be informed of the impact during the relocation period.


Re: Tellique and the newer Intel & AMD processors

gerald ashford <gerald.ashford@...>
 

david
i dont know if i'm looking at the right thing but my p4 has hyperthreading auto or disabled my computer is set to auto
and every thing is ok nice pictures
my computer is 2.4cpu 1gig memory may be the 1gig mem helps to keep it working
gerald


Tellique and the newer Intel & AMD processors

David J Taylor GM8ARV 🏴󠁧󠁒󠁳󠁣󠁴󠁿 πŸ‡ͺπŸ‡Ί
 

Folks,

I note from the release notes that the Tellique software does not
work with the Hyperthreading feature of newer processors enabled.
Indeed, I turned that feature off in the BIOS on my latest PC. Has
anyone tried the software with Hyperthreading enabled? (Recent
Pentium 4 processors have this "HT" feature.)

Looking ahead, has anyone tested with the AMD 64-bit processors?
These are now on sale and being offered to new PC purchasers. I
would hate to think of someone spending a large amount of money only
to find the software didn't work!

Cheers,
David


Re: Two PC's and MSG

sbu979r
 

Hi John,

Thanks for that info, I'll give it a try.

Regards,

Basil


Re: Two PC's and MSG

John Thexton <john@...>
 

Hi Basil

Yes i run one PC for reception and processing plus broadband and GeoSatSignal. I only recieve 14 of the 24 channels inc.HRV.
I did try 2 pc for a while but found no advantage i have not had any real problems or recurring lost segments.My pc was 2200 but is
now 3200. 500mb memory Win XP pro i have been recieving since last May there does apear to be an element of luck involved.
give it a try best of luck.
Regards

John
From: basilhaigh@aol.com
To: MSG-1@yahoogroups.com
Sent: Friday, January 02, 2004 5:03 PM
Subject: Re: [MSG-1] Re: Two PC's and MSG


Hi Guys,

Thanks for your comments, much appreciated.
You know, I was just about to ask if anyone out there was using one PC for
reception and processing.
The Win XP machine was built especially for MSG, so perhaps before linking
two I should try the, hopefully, easy option of the dedicated one.
I have partitioned the HD into two 60 Gb sections.

Kind regards,

Basil






------------------------------------------------------------------------------
Yahoo! Groups Links

a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/MSG-1/

b.. To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@yahoogroups.com

c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.


Re: Two PC's and MSG

sbu979r
 

Hi Guys,

Thanks for your comments, much appreciated.
You know, I was just about to ask if anyone out there was using one PC for
reception and processing.
The Win XP machine was built especially for MSG, so perhaps before linking
two I should try the, hopefully, easy option of the dedicated one.
I have partitioned the HD into two 60 Gb sections.

Kind regards,

Basil


Re: Animator file locations

David J Taylor GM8ARV 🏴󠁧󠁒󠁳󠁣󠁴󠁿 πŸ‡ͺπŸ‡Ί
 

--- In MSG-1@yahoogroups.com, "Alan Sewards" <alan.sewards@c...>
wrote:
David,
Thank you. that has enabl;ed me to fix the problem. What I
wanted to do WAS supported!

All running fine now. I can even boot without the floppy!
Glad to hear that, Alan. I think I must have built the program with
that in mind, but I would not normally call editing the
registry "supported"!

Cheers,
David


Re: Animator file locations

Alan Sewards <alan.sewards@...>
 

David,
Thank you. that has enabl;ed me to fix the problem. What I wanted to do
WAS supported!

All running fine now. I can even boot without the floppy!

Best regards - Alan

----- Original Message -----
From: "David Taylor" <david-taylor@blueyonder.co.uk>
To: <MSG-1@yahoogroups.com>
Sent: Thursday, January 01, 2004 9:57 PM
Subject: [MSG-1] Re: Animator file locations


Notwithstanding, it has created the animation files on the wrong
drive and I want to change it.

Best regards - Alan
At your own risk, play with:

HKCU&#92;Software&#92;David J Taylor&#92;MsgAnimator&#92;TempPath

Ensure you retain the trailing backslahs. I don't think what you
want is currently supported.

Cheers,
David




Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/MSG-1/

To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/




Re: Animator file locations

David J Taylor GM8ARV 🏴󠁧󠁒󠁳󠁣󠁴󠁿 πŸ‡ͺπŸ‡Ί
 

Notwithstanding, it has created the animation files on the wrong
drive and I want to change it.

Best regards - Alan
At your own risk, play with:

HKCU&#92;Software&#92;David J Taylor&#92;MsgAnimator&#92;TempPath

Ensure you retain the trailing backslahs. I don't think what you
want is currently supported.

Cheers,
David


Re: Animator file locations

Alan Sewards <alan.sewards@...>
 

David,
Thanks for the hint, but I knew about setting the DATA path, and there
doesn't seem to be any way of setting the Animations path. It says in the
Notes that if Animator does not find MSGDM on loading it asks for both data
path and where to store the animations, but mine has always been loaded with
MSG DM in the same directory and running, so the question has never been
asked. Notwithstanding, it has created the animation files on the wrong
drive and I want to change it.

Best regards - Alan

----- Original Message -----
From: "David Taylor" <david-taylor@blueyonder.co.uk>
To: <MSG-1@yahoogroups.com>
Sent: Thursday, January 01, 2004 4:30 PM
Subject: [MSG-1] Re: Animator file locations


--- In MSG-1@yahoogroups.com, "Alan Sewards" <alan.sewards@c...>
wrote:
I find that MSG Animator is using a directory called MSG1
&#92;Images on the C:&#92; drive to store the animations. I want it to use
D:&#92;MSG1&#92;Images instead but I cannot find anywhere to tell Animator
this. (D: drive is faster than C:)

Alan,

Right-click the MSG Animator icon, Set data path...

Cheers,
David




Yahoo! Groups Links

To visit your group on the web, go to:
http://groups.yahoo.com/group/MSG-1/

To unsubscribe from this group, send an email to:
MSG-1-unsubscribe@yahoogroups.com

Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/




Re: Tellique Startup

Roger Mawhinney <roger@...>
 

Sorry, I should know by now. Windows XP Pro, + SP1.
Roger

|-----Original Message-----
|From: Dave Martin [mailto:Dave.Martin@manx.net]
|Sent: 01 January 2004 13:19
|To: MSG-1@yahoogroups.com
|Subject: [MSG-1] Re: Tellique Startup
|
|
|what OS Roger?
| ----- Original Message -----
| From: Roger Mawhinney
| To: MSG-1@yahoogroups.com
| Sent: Thursday, January 01, 2004 12:09 PM
| Subject: [MSG-1] Tellique Startup
|
|
| If I start Tellique (ver 2.0.3a) after running other
|applications, it does
| not connect. I only get it to connect if I start immediately after a
| re-boot. Is there an explanation for this?
|
| Roger


Re: Animator file locations

David J Taylor GM8ARV 🏴󠁧󠁒󠁳󠁣󠁴󠁿 πŸ‡ͺπŸ‡Ί
 

--- In MSG-1@yahoogroups.com, "Alan Sewards" <alan.sewards@c...>
wrote:
I find that MSG Animator is using a directory called MSG1
&#92;Images on the C:&#92; drive to store the animations. I want it to use
D:&#92;MSG1&#92;Images instead but I cannot find anywhere to tell Animator
this. (D: drive is faster than C:)

Alan,

Right-click the MSG Animator icon, Set data path...

Cheers,
David