David I certainly see that structure for DEVCOCAST-1 and Americas Channel 1, but the CMA data on Channel 11 does not need a sub-directory. My entry in recv-channels.ini simply shows " target_directory=received "

The other channels listed I do not receive or are not yet available.

Regards
Ian.

--------------------------------------------------
From: "David J Taylor" <gm8arv@yahoo.co.uk>
Sent: Saturday, January 02, 2010 6:30 AM
To: <MSG-1@yahoogroups.com>
Subject: Re: [MSG-1] Re: Chlorophyll data

To let MDM handle this data I have received files under:
received&#92;MSG&#92;Data Channel 8
Correct me if I am wrong.

Greetings,
Arne van Belle

Arne,

All you need is to have the files in a sub-directory "Data Channel 8" of
the path specified as the TelliCast received files location. So if that
is specified in the MSG Data Manager as the full path to:

received&#92;MSG&#92;

then the program will look in the full path to:

received&#92;MSG&#92;Data Channel 8

for the chlorophyll data. Folders which are treated in the same way
include:

for MODIS Winds: Data Channel 4
for Devcocast1: DEVCOCAST-1
for DataChan8Files: Data Channel 8
for DataChan10Files: Data Channel 10
for DataChan11Files: Data Channel 11
for DataChan12Files: Data Channel 12
for AmericasChannel1Files: Americas-CH1

Sub-directories which are also scanned, irrespective of any user
selection:

BMD-RA-VI
DWDSAT

73,
David

To let MDM handle this data I have received files under:
received&#92;MSG&#92;Data Channel 8
Correct me if I am wrong.

Greetings,
Arne van Belle

Arne,

All you need is to have the files in a sub-directory "Data Channel 8" of the path specified as the TelliCast received files location. So if that is specified in the MSG Data Manager as the full path to:

received&#92;MSG&#92;

then the program will look in the full path to:

received&#92;MSG&#92;Data Channel 8

for the chlorophyll data. Folders which are treated in the same way include:

for MODIS Winds: Data Channel 4
for Devcocast1: DEVCOCAST-1
for DataChan8Files: Data Channel 8
for DataChan10Files: Data Channel 10
for DataChan11Files: Data Channel 11
for DataChan12Files: Data Channel 12
for AmericasChannel1Files: Americas-CH1

Sub-directories which are also scanned, irrespective of any user selection:

BMD-RA-VI
DWDSAT

73,
David
--
SatSignal software - quality software written to your requirements
Web: www.satsignal.eu
Email: davidtaylor@writeme.com

To let MDM handle this data I have received files under:
received&#92;MSG&#92;Data Channel 8
Correct me if I am wrong.

Greetings,
Arne van Belle

Hello David ,
i acivate the MSG Data Manager Ver.2.5.25.900 to handle
the datas from the received folder.

But the datas are still in the received folder in.

What i am doing wrong ????

Regards
Joachim

Do you have lines in your recv-channels.ini like:

[EUMETSAT Data Channel 8]
target_directory=received&#92;Data Channel 8

The version of the MSG Data Manager you are using is rather old, please update to V2.5.34 - it's free:

http://www.satsignal.eu/software/msg_dm.htm#bundle

Cheers,
David
--
SatSignal software - quality software written to your requirements
Web: www.satsignal.eu
Email: davidtaylor@writeme.com

Chlorophyll data on [EUMETSAT Data Channel 8], from MODIS IIRC.
Handled by the MSG Data Manager if you ask it to manage channel-8 data. If you don't need channel-8 data, you should configure your recv-channels.ini not
to receive it.


Hello David ,
i acivate the MSG Data Manager Ver.2.5.25.900 to handle
the datas from the received folder.

But the datas are still in the received folder in.

What i am doing wrong ????

Regards
Joachim

Hello Folks , i have a Question to the Specialists :

Since the 29.12.2009 i receive folowing compressed files in the received folder :

A2009352.L3m_DAY_CHLO_4 at 29.12.2009
A2009353.L3m_DAY_CHLO_4 at 30.12.2009
A2009354.L3m_DAY_CHLO_4 at 31.12.2009

This files are compressed Datafiles and they are not automaticly deleted.

Can anybody tell me what kind of datafiles this are ????

Kind regards and a HAPPY NEW YEAR from Germany

Joachim
DL2388RB

Chlorophyll data on [EUMETSAT Data Channel 8], from MODIS IIRC. Handled by the MSG Data Manager if you ask it to manage channel-8 data. If you don't need channel-8 data, you should configure your recv-channels.ini not to receive it.

Happy New Year!

73,
David
--
SatSignal software - quality software written to your requirements
Web: www.satsignal.eu
Email: davidtaylor@writeme.com

Hello Folks , i have a Question to the Specialists :

Since the 29.12.2009 i receive folowing compressed files in the received folder :

A2009352.L3m_DAY_CHLO_4 at 29.12.2009
A2009353.L3m_DAY_CHLO_4 at 30.12.2009
A2009354.L3m_DAY_CHLO_4 at 31.12.2009

This files are compressed Datafiles and they are not automaticly deleted.

Can anybody tell me what kind of datafiles this are ????

Kind regards and a HAPPY NEW YEAR from Germany

Joachim
DL2388RB

http://www.satsignal.eu/mrtg/Eumetcast.html

Hi David,

Just to say I think that first page above may need a little updating - I
appear on the second, but not on the first - not to worry if it is a bit
of a potch! (Welsh expression I think!)

Cheers
James

Definitely a Welsh expression! I can think of hotch-potch, which then brings Lancashire Hot-Pot to mind!

I hope the page is now fixed - I had noticed Porthcawl being mis-spelt only earlier today.

Cheers,
David
--
SatSignal software - quality software written to your requirements
Web: www.satsignal.eu
Email: davidtaylor@writeme.com

to you:

http://www.satsignal.eu/mrtg/Eumetcast.html

If there's anything I've missed or which needs correction, please let me
know.

Hi David,

Just to say I think that first page above may need a little updating - I appear on the second, but not on the first - not to worry if it is a bit of a potch! (Welsh expression I think!)

Cheers
James
--
James Brown

On Monday 28 December 2009 16:53:37 you wrote:

Hi all,

Just a short note to say that my webpage showing the status of my
receiving
system has changed - well not its location but its content (still at
<http://www.dctower.co.uk/msg>;).

[]

[David, the card is now a 2.8a should you wish to update your 'round
Europe'
page]

Regards

Nick

Nick,

Thanks for that - I've updated the two pages which refer to you:

http://www.satsignal.eu/mrtg/Eumetcast.html

http://www.satsignal.eu/mrtg/EumetcastEurope.html

If there's anything I've missed or which needs correction, please let me
know.

By the way: it would be nice if your MRTG graphs were 500 pixels wide like
everyone else's. I expect that got missed in the changeover. Near the
start of your MRTG config file, add:

____________________________________________
# Default values

XSize[_]: 500
Timezone[_]: GMT
____________________________________________


Glad to hear that my software works with Virtual Box - that means it can
run on Linux or the Mac, I believe.

Cheers,
David

Oops yes forgot that bit (again!).

The SNR is quoted as % - actually comes out as a 0x number relative to 0xffff
(I think) I adapted femon to output just the stuff I wanted as decimal
numbers as I don't know how mrtg will react to numbers in hex!

I'll get ber, .fsy file size etc. up later

Nick
--
"Bingeley bingeley beep!"
(Feet of Clay)
17:29:47 up 17 days, 20:55, 7 users, load average: 0.36, 0.49, 0.47

Hi all,

Just a short note to say that my webpage showing the status of my receiving
system has changed - well not its location but its content (still at
<http://www.dctower.co.uk/msg>;).

[]

[David, the card is now a 2.8a should you wish to update your 'round Europe'
page]

Regards

Nick

Nick,

Thanks for that - I've updated the two pages which refer to you:

http://www.satsignal.eu/mrtg/Eumetcast.html

http://www.satsignal.eu/mrtg/EumetcastEurope.html

If there's anything I've missed or which needs correction, please let me know.

By the way: it would be nice if your MRTG graphs were 500 pixels wide like everyone else's. I expect that got missed in the changeover. Near the start of your MRTG config file, add:

____________________________________________
# Default values

XSize[_]: 500
Timezone[_]: GMT
____________________________________________


Glad to hear that my software works with Virtual Box - that means it can run on Linux or the Mac, I believe.

Cheers,
David
--
SatSignal software - quality software written to your requirements
Web: www.satsignal.eu
Email: davidtaylor@writeme.com

Hi all,

Just a short note to say that my webpage showing the status of my receiving
system has changed - well not its location but its content (still at
<http://www.dctower.co.uk/msg>;).

Currently an AMDx2 processor with 1Gb memory (must do something about that!),
running Fedora 12 and virtualbox to get David's software running as there were
memory issues under wine.

I have the feeling the HDD is about to depart this life - also on the to do
list!

Some missed segments, but as I've not got a ram disk set-up yet (not enough
ram to go round!) not bad.

[David, the card is now a 2.8a should you wish to update your 'round Europe'
page]

Regards

Nick
--
"Nulli Sheilae sanguineae"
(The Last Continent)
16:03:47 up 17 days, 19:29, 7 users, load average: 1.10, 0.86, 0.78

Folks,

May I just wish you all Merry Christmas, Happy Holidays, and a prosperous and healthy 2010. Whatever you would wish yourself. My thanks to you all for your support throughout the year. I can see some good things coming early next year as well. Remember the UK tax rises on the first of January, so get your orders in this year to beat the tax rise!

Of course, there has to be a snag, doesn't there? My ISP's e-mail is down right now, so for anything urgent please use: satsignal@gmail.com

Cheers,
David
--
SatSignal software - quality software written to your requirements
Web: www.satsignal.eu
Email: davidtaylor@writeme.com

I see the missing FY2E image data from this morning ( first data was time stamped 12.00 ) is now being sent, but is correctly being "skipped - data is older than current data " by Data Manager.

Ian.

David J Taylor wrote:

Good morning to the Group !
Re my previous message-query my Tellicast recv log has now a useful information re error -
it says "Cannot start HTPP server at port 2517 on all interfaces
(address already in use)"
Is there anything I could do to overcome - solve this
error ?
Kindly let me know to prevent scrapping all my computers.
Thank you very much in advance,
Regards,
Roland

Roland,
That sounds like you are trying to start TelliCast when it is already running, and hence the port 2517 is already in use. Check that you only have one startup for TelliCast - perhaps using sysinternals AutoRuns program:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
Also check with your firewall that tc-recv.exe is allowed both incoming and outgoing access to the Internet.
Just a couple of suggestions - no promises that this will make things work.
Cheers,
David

I believe this is where you have not removed all instances of previous Tellicast instances.
goto Control Panel, System, Hardware, Device Manager, Network adapters.
Under View click 'show hidden devices'.
If you have more than two instances of Technisat - remove them all and then do a new install.

Alan

Good morning to the Group !
Re my previous message-query my Tellicast recv log has now a useful information re error -
it says "Cannot start HTPP server at port 2517 on all interfaces
(address already in use)"
Is there anything I could do to overcome - solve this
error ?
Kindly let me know to prevent scrapping all my computers.
Thank you very much in advance,
Regards,
Roland

Roland,

That sounds like you are trying to start TelliCast when it is already running, and hence the port 2517 is already in use. Check that you only have one startup for TelliCast - perhaps using sysinternals AutoRuns program:

http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

Also check with your firewall that tc-recv.exe is allowed both incoming and outgoing access to the Internet.

Just a couple of suggestions - no promises that this will make things work.

Cheers,
David
--
SatSignal software - quality software written to your requirements
Web: www.satsignal.eu
Email: davidtaylor@writeme.com

Good morning to the Group !
Re my previous message-query my Tellicast recv log has now a useful information re error -
it says "Cannot start HTPP server at port 2517 on all interfaces
(address already in use)"
Is there anything I could do to overcome - solve this
error ?
Kindly let me know to prevent scrapping all my computers.
Thank you very much in advance,
Regards,
Roland

Good evening,
log file does not show any errors. Tc-recv.exe is running, Status is starting - no throughput of data yet !
Green dots at bottom regularly flashing - seems data comes in but is not opened !
I checked pids, DVB sat icon always green !
I checked firewall - total blocking - switching off of it shows no effect - yellow T persists !
Oh, I am back to my usual Acer PC running with Windows Professional !
Did good job for years but all of a sudden I got this d.....yellow T - I am really without clue - maybe some hidden windows update is the reason.
Would you please help me.
Thsnks in advance,
Roland

Hello David ,
i am using yours firetracker bought in 2007.
also the used Version is from 2007.
there are any Software - updates available ????
Regards from Germany
Joachim

Joachim,

Please see my answer in the SatSignal Yahoo group

Cheers,
David
--
SatSignal software - quality software written to your requirements
Web: www.satsignal.eu
Email: davidtaylor@writeme.com

Hello David ,
i am using yours firetracker bought in 2007.
also the used Version is from 2007.
there are any Software - updates available ????
Regards from Germany
Joachim