|
Re: Tellicast Flow Monitor
a_van_belle
Hello Enzo,
toggle quoted messageShow quoted text
Your problem must be IE8, try the advise given on http://carbonize.co.uk/wp/2009/03/23/ie8-problems-fixes/ If this fails try to revert to IE7 or IE6 Or install Firefox ! When you don't have JAVA support you will see the overview page opening but where the graph should be a text is displayed: "can't display throughput graph" Good luck, Arne van Belle
--- In MSG-1@..., "ik8ozv" <vimone@...> wrote:
|
|
|
|
Re: Tellicast Flow Monitor
Vincenzo Mone
Rob,
toggle quoted messageShow quoted text
how to see if Java is enabled? Thanks 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 *************************************** ***** GSM +39 338 9749786 ***** ***** SMS +39 338 9749786 ***** ***** FAX +39 328 7244294 ***** *** 2nd e-mail: vimone@... *** ***************************************
--- In MSG-1@..., "brekaman" <rob@...> wrote:
|
|
|
|
Re: Tellicast Flow Monitor
Vincenzo Mone
Hi Arne,
toggle quoted messageShow quoted text
The version of IE is 8.0.6001.18702. Tried as you said entering http://localhost:2517/ directly in IE, I can see a abit of the page loadin the i get an IE error window saiyng the the program will be closed and all the system stucks. I need to restart the PC. Please how to disable the firewall to try? I am using Kaspersky Internet Security 2010 aand have also tried to shut it down but have the same problem. Any other suggestions? Thanks 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 *************************************** ***** GSM +39 338 9749786 ***** ***** SMS +39 338 9749786 ***** ***** FAX +39 328 7244294 ***** *** 2nd e-mail: vimone@... *** ***************************************
--- In MSG-1@..., "a_van_belle" <a.van.belle@...> wrote:
|
|
|
|
Re: Tellicast Flow Monitor
From: "ik8ozv" <vimone@...>
Sent: Monday, August 31, 2009 6:25 AM To: <MSG-1@...> Subject: [MSG-1] Tellicast Flow Monitor Hi Folks,Enzo, Did you try the suggestions which Rob and Arne van Belle already made? What was the result? David -- SatSignal software - quality software written to your requirements Web: www.satsignal.eu Email: davidtaylor@...
|
|
|
|
Tellicast Flow Monitor
Vincenzo Mone
Hi Folks,
I am having a problem to monitor the Tellicast data flow. As everyone knows, clicking on the pink "T" in the taskbar, You will get an IE page which shows the graphic of the data flow Of the tellicast.When I click on it I can see the IE page opens But nothing loads. I get the advise that the settings of the Intranet are Disabled for the default settings. If I click on the bar to accept it, I get stucked and get the error "NOT RESPONDING" Where am I missing? Ho to solve it? Thanks in advance 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 *************************************** ***** GSM +39 338 9749786 ***** ***** SMS +39 338 9749786 ***** ***** FAX +39 328 7244294 ***** *** 2nd e-mail: vimone@... *** ***************************************
|
|
|
|
Re: Tellicast Flow Monitor
a_van_belle
Hello Enzo,
toggle quoted messageShow quoted text
If nothing opens then you have a configuration error in IE. When you lack Java support, the page opens but you cannot see the throughput graph. What version of IE are you using ? Try entering http://localhost:2517/ directly in IE A firewall could block the Tellicast webpage. Try again after disabling firewall(s). Good luck, Arne van Belle
--- In MSG-1@..., "Vincenzo Mone" <vimone@...> wrote:
|
|
|
|
Re: Tellicast Flow Monitor
Robert Denton
--- In MSG-1@..., "Vincenzo Mone" <vimone@...> wrote:
Enzo, Do you have Java enabled? Other than that I'm not sure what is the problem. 73 Rob LZ/G4YRZ
|
|
|
|
Tellicast Flow Monitor
Vincenzo Mone
Hi Folks,
I am having a problem to monitor the Tellicast data flow. As everyone knows, clicking on the pink "T" in the taskbar, You will get an IE page which shows the graphic of the data flow Of the tellicast.When I click on it I can see the IE page opens But nothing loads. I get the advise that the settings of the Intranet are Disabled for the default settings. If I click on the bar to accept it, I get stucked and get the error "NOT RESPONDING" Where am I missing? Ho to solve it? Thanks in advance 73 de Enzo IK8OZV EasyLog 5 BetaTester EasyLog PDA BetaTester WinBollet BetaTester D.C.I. CheckPoint Regione Campania Skype: ik8ozv8520 *************************************** ***** GSM +39 338 9749786 ***** ***** SMS +39 338 9749786 ***** ***** FAX +39 328 7244294 ***** *** 2nd e-mail: vimone@... *** ***************************************
|
|
|
|
Re: Ku-band strength drop after 12:00 UTC Friday Aug 28
Ian Deans
I am seeing a reduction in my SQ from about 91-94% to 82-85%. My SS is down
from about 59/60% to a steady 58%. I have a fairly long cable run hence the low SS. The problem re freezing with no Testbild channel appears to have been resolved as I tested this last night and again this morning and all OK with channel not available. However with no losses today so far it does appear, that as Arne suggested, probably a change in uplink. Regards Ian. -------------------------------------------------- From: <geojohnt@...> Sent: Saturday, August 29, 2009 11:13 AM To: <MSG-1@...> Subject: Re: [MSG-1] Re: Ku-band strength drop after 12:00 UTC Friday Aug 28 All,
|
|
|
|
Re: Ku-band strength drop after 12:00 UTC Friday Aug 28
Alan Banks <alan@...>
Ah! No missed packets, no lost data and no increase in 0.fsy. Much better in spite of lower SQ & SNR.
toggle quoted messageShow quoted text
Alan geojohnt@... wrote:
All,
|
|
|
|
Re: Ku-band strength drop after 12:00 UTC Friday Aug 28
geojohnt@...
My digital meter readings taken at 10:25 and 14:25 UTC today are actually
not much different to some I took back in March - for some reason(?). C/N figure is not as good today (down 1 dB) compared to March though other levels are only slightly down and there are some BE's being indicated. My DVBWorld SQ readout is still down. Meter readings at the computer are: PWR 83/84 dBuV. C/N 13.0/.1 dB. SS 68/70%. SQ 79/82%. Regards, John.
|
|
|
|
Re: Ku-band strength drop after 12:00 UTC Friday Aug 28
geojohnt@...
All,
I've not been receiving for a couple of days. Having read the news, I've just switched on the system and find indeed lower levels indicated - well, lower SQ. The DVBWorld readout using a pre-latest GEO shop batch of boxes, I'm getting SS 70% and SQ 91%. Previously this was always SS 70 - 71% and SQ 100%. And, as Ian said, the testbild channel is not active - though trying to open it didn't freeze the DVBWorld box. I'll put a digital meter on the downlink later to get more accurate figures. Regards, John.
|
|
|
|
Re: [?? Probable Spam] Ku-band strength drop after 12:00 UTC Friday Aug 28
James Brown
In message <D0E39DDB8D414B5B8C158FC44A6302E1@narvik>, David J Taylor <gm8arv@...> writes
I see the Ku-band strength has dropped since just after 12:00 UTC today What a perverse system I have!! If anything there has been a marginal increase in sig quality and s/n ratio as indicated on the Porthcawl grap on the above. I can only assume there was perhaps a very slight mis-alignment which now takes advantage of the new transponder - otherwise I'm left scratching my head - and also feeling unhappy that so many are now seeing a significant dip. Cheers James -- James Brown
|
|
|
|
Re: Ku-band strength drop after 12:00 UTC Friday Aug 28
Ian Deans
I also noticed that the Testbild channel has been unavailable since I
switched on this morning at about 07.00 UTC. Possible that may be connected to issues with uplink. My Dexatek Box opens up on Testbild and the fact that it was unavailable caused the box to freeze for some reason, and I had to reboot the computer to get it working again. Regards Ian. -------------------------------------------------- From: "a_van_belle" <a.van.belle@...> Sent: Friday, August 28, 2009 8:37 PM To: <MSG-1@...> Subject: [MSG-1] Re: Ku-band strength drop after 12:00 UTC Friday Aug 28 The signal dropped here at 12:12 and triggered a lot of lost messages.
|
|
|
|
Re: Ku-band strength drop after 12:00 UTC Friday Aug 28
a_van_belle
The signal dropped here at 12:12 and triggered a lot of lost messages.
toggle quoted messageShow quoted text
But it did stop my missing Metop data and improved other data. It looks like problems are almost gone now ! My guess is that Media Broadcast did switch EUMETCast over to another uplink or modulator. Greetings, Arne van Belle
--- In MSG-1@..., "David J Taylor" <gm8arv@...> wrote:
|
|
|
|
Ku-band strength drop after 12:00 UTC Friday Aug 28
I see the Ku-band strength has dropped since just after 12:00 UTC today across Europe:
http://www.satsignal.eu/mrtg/EumetcastEurope.html but we are still seeing packet loss after then..... Cheers, David -- SatSignal software - quality software written to your requirements Web: www.satsignal.eu Email: davidtaylor@...
|
|
|
|
Re: Missed Packets
From: "Alan Banks" <>
Sent: Friday, August 28, 2009 3:45 PM To: <MSG-1@...> Subject: [MSG-1] Missed Packets Hi All,Thanks, Alan. As I thought, this is probably outside EUMETSAT's direct control, so we can but hope for the best. Cheers, David -- SatSignal software - quality software written to your requirements Web: www.satsignal.eu Email: davidtaylor@...
|
|
|
|
Missed Packets
Alan Banks <alan@...>
Hi All,
This from Debbie at Ops Dear Alan Banks, Subject : EUMETCast Reception Issues There are currently some problems with the Usingen Ground Station, these problems are under investigation and we will get back to you as soon as possible with further information. Best regards Debbie Richards Cheers Alan
|
|
|
|
Re: NOAA AVHRR ???
pat0691
--- In MSG-1@..., "David J Taylor" <gm8arv@...> wrote:
Thank you very much David, for the information. Ciao Pat
|
|
|
|
Re: NOAA AVHRR ???
Sent: Friday, August 28, 2009 2:04 PM
To: <MSG-1@...> Subject: [MSG-1] NOAA AVHRR ??? I return to receive Eumetcasy data from many time.Yes, Pat, data is flowing. Here is my log for today, showing some missing data because of the current EUMETCast problems: 00:26 NOAA-19 26 minutes 00:33 NOAA-17 22 minutes, 00:38 00:39 00:40 00:41 00:42 00:43 00:44 02:07 NOAA-19 31 minutes 02:17 NOAA-17 21 minutes, 02:21 02:23 02:24 02:25 02:26 02:27 03:49 NOAA-19 29 minutes 04:10 NOAA-17 11 minutes 05:30 NOAA-19 16 minutes 05:51 NOAA-17 13 minutes 07:11 NOAA-19 14 minutes 07:32 NOAA-17 25 minutes 08:51 NOAA-19 16 minutes 09:13 NOAA-17 29 minutes 10:25 NOAA-19 22 minutes 10:53 NOAA-17 29 minutes 12:03 NOAA-19 27 minutes 12:33 NOAA-17 25 minutes, 12:49 12:50 12:51 12:52 Ciao, David -- SatSignal software - quality software written to your requirements Web: www.satsignal.eu Email: davidtaylor@...
|
|
|