Re: suddenly not locked through my ayecka sr1

Ernst Lobsiger

On Fri, Sep 4, 2020 at 04:18 AM, Philip Robinson wrote:
or maybe this one

or can anyone recommend a good power supply unit. I am not very electrically experienced and i want to make sure i have the correct one

This is from the SR1 Manual page 51

9.8 Operating Power
The mains operating power includes the following:
Voltage: 12V
Minimum Current: 1.5A
Connector type 2mm. + in internal contact

So with a PSU rated 12V 2A you should be fine. It should not be less than 2A (that's what the PSU can deliver).
Also 12V 3A will be fine. This will not "burn" your SR1. The receiver just takes what it needs, but the PSU must
be capable to deliver that. There must be some 12V xA indication on your possibly broken Samcon PSU as well.


Join to automatically receive all group messages.