Re: Tellicast bas and hvs-1 change over.
David J Taylor
I'm getting there.
Just a few loose ends to tie up.
Overnight my bas icon went red - however data kept flowing.
Opening HTML Shell showed Status: ERROR.
Level: (used for new log entries) Filter: Show only logs of this level and above
Lvl:Date Time (UTC) :Message ERR:2019-06-24 14:52:22.243:Could not join channel "EUMETSAT Data Channel 1": Missing key 55512. ERR:2019-06-25 04:01:53.936:Could not join channel "EUMETSAT Data Channel 2": Missing key 13004. ERR:2019-06-25 04:02:14.076:Could not join channel "EUMETSAT Data Channel 6": Missing key 13019. ERR:2019-06-25 04:02:27.795:Could not join channel "EUMETSAT Data Channel 2": Missing key 13027.
I cant find any information as to what the Missing Key means.
And, as data is still flowing OK, does it matter?
I know I can just delete error message by pressing reset.
I get those when the signal is becoming weak. If you're using one receiver for BAS and HVS-1 then a weak HVS-1 signal can trigger errors like this in the BAS.
Again, with the other stuff, turn on channels one at a time and see when the unwanted data starts. Don't have a catch-all "*" default channel.
SatSignal Software - Quality software for you