Re: R: Yellow "T"

Chris Hughes <chughes@...>

Ok, I use the USB unit, I had the same problem and I had to disable the comm port on the pc until I had the T running, sorry cant help more.


Visit my weather site<>

On 29 Oct 2012, at 10:33, "ik8ozv" <<>> wrote:

Hi Chris,
i am using a PCI Skystar card.

--- In<>, Chris Hughes <chughes@...> wrote:

Are you using pic card or USB


Visit my weather site<><>

On 29 Oct 2012, at 10:14, "ik8ozv" <vimone@...<mailto:vimone@...>> wrote:

i am ecountering again the problema below.
Now, also with the Firewall disabled i sitll get the
Tellicast Icon Stucked on Yellow.
Please any help?

--- In<><<>>, "Vincenzo Mone" <vimone@> wrote:

Hi Ian,

yes it was the Firewall.

Disabled it and it went pink.

Thanks for your help

73 de Enzo IK8OZV

EasyLog 5 BetaTester

EasyLog PDA BetaTester

WinBollet BetaTester

D.C.I. CheckPoint Regione Campania

Skype: ik8ozv8520


******* GSM +39 338 9749786 *******

****** SMS +39 338 9749786 ******

***** FAX +39 328 7244294 *****

*** 2nd e-mail: vimone@ ***


Da:<><<>> [<><<>>] Per conto di Ian
Inviato: sabato 29 settembre 2012 21:02
Oggetto: Re: [MSG-1] Yellow "T"

Vincenzo, reading your mail I am assuming you are using the Technisat PCI
card. The most likely cause for a yellow "T" is a firewall issue.
Disable the firewall ( Windows or third party ) and see if that resolves the


If that works remember to enable the firewall again with the appropriate


-----Original Message-----
From: Vincenzo Mone
Sent: Saturday, September 29, 2012 7:12 PM
To:<><<>> <<><>>
Subject: [MSG-1] Yellow "T"

Hi Folks,
I am trying to setup my new Windows 7 64 Bit PC.
Installed the Drivers Card.
Installed and set the Setup4C to receive EuroBird 9.
I get the icon Green.
Installed then the EKU Software and the Tellicast software but when I run it
I get the Icon Stucked on Yellow.
Have made all the settings as described on David's website about
The Network configuration.
Please what am I missing?
Thanks in advance.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

Join to automatically receive all group messages.